[eff32fl]

Originally Posted by Samir72

Benzinfrabik now offer orange 605/blue on their led boards

Ahh nice Benzinfabrik has great products I have their blue/white LED modules installed.

[pak1s0ul]

Nice work! I'm selling similar product plug and play but restricted to 2 color options.
https://bimmerfinds.etsy.com

[Erie Von Otto]

Originally Posted by eff32fl

Nice where did you get your orange/blue ambient light modules?

Not modules but the light Strips. Picked some up from Ali express. Work great but I'd really like multicolor and in more places...

[WillLowe]

Originally Posted by pak1s0ul

Nice work! I'm selling similar product plug and play but restricted to 2 color options.
https://bimmerfinds.etsy.com

Any discount for fellow forum members?

[pak1s0ul]

Originally Posted by cozzzz

Thanks guys, appreciate it!

Added new links to a video and a photo album in the second post, will start working on the diy guide. Might take some time to finish though, will keep updating as I go.



The controller is a custom built part, same as the led modules, but the most important part of it is the digispark, you can buy it here for example.

For reference, below is what my board looks like, before going in a box in the car. Might look complicated, but it's really not:
- tiny usb board is the digispark
- the blue rectangular board is a step down dc-dc converter (optional - if choosing to power the board directly to 12V)
- the 4 resistors are there to make 2 small voltage dividers for the digispark inputs
Everything else is just the prototype board, few wires and connectors. The orange/white cables are the inputs(from the car), the blue/red wires are the outputs(going to the lights). The 2 pins left unconnected are for power.

Hello if you don't mind can I get the schematics for this?