Speedtech.com Stg3 Turbo (600whp)

135iDCT · 09-19-2017, 03:44 PM

Quote:

Originally Posted by HKD126

Proper timing or not, octane is the issue and you aren't going to hit 500whp with 91 on this or any set up.

he can with lpfp stg3 + pi on EFR8374

Tchao · 09-19-2017, 06:25 PM

Quote:

Originally Posted by 135iDCT

he can with lpfp stg3 + pi on EFR8374

Port Injection does not add octane value.

And port-spraying pump gas on a high compression boosted motor is dangerous.

135iDCT · 09-20-2017, 07:04 PM

Quote:

Originally Posted by Tchao

Port Injection does not add octane value.

And port-spraying pump gas on a high compression boosted motor is dangerous.

doc race hits 560 whp on pump93, 6266 turbo n54, search for it

JaredG_F30 · 09-21-2017, 07:04 PM

Anybody pull the trigger on this yet?

obriennathaniel · 09-22-2017, 07:37 AM

Quote:

Originally Posted by JaredG_F30

Anybody pull the trigger on this yet?

if everybody on the forum donates $50 to me, ill be the guinea pig lol

TR-8R · 09-23-2017, 01:25 PM

Quote:

Originally Posted by obriennathaniel

Quote:

Originally Posted by JaredG_F30

Anybody pull the trigger on this yet?

if everybody on the forum donates $50 to me, ill be the guinea pig lol

:

HKD126 · 09-23-2017, 04:43 PM

I was going to buy it over a month ago, but PTF didn't have time to dedicate to tuning it. In the meantime I'm going with an Aquamist methanol setup with the EOS intake manifold.

TR-8R · 09-23-2017, 06:13 PM

Quote:

Originally Posted by HKD126

I was going to buy it over a month ago, but PTF didn't have time to dedicate to tuning it. In the meantime I'm going with an Aquamist methanol setup with the EOS intake manifold.

Did u see speedtech offer a tune in "tuners" on the BM3 app?

HKD126 · 09-23-2017, 06:28 PM

Quote:

Originally Posted by TR-8R

Did u see speedtech offer a tune in "tuners" on the BM3 app?

Per my conversations I had with both Jeff at SpeedTech and Dzenno at PTF, I would need a custom tune for this which Jeff did not offer and PTF did not have time for. I've been wanting this kit for over 3 months and was ready to pull the trigger. I however was not slapping a turbo on my car that was not able to be tuned. I've decided to go with a pretty involved meth setup right now instead. I'll buy the SpeedTech kit after winter when I can get it tuned.

ronanz · 09-23-2017, 06:41 PM

Quote:

Originally Posted by HKD126

I was going to buy it over a month ago, but PTF didn't have time to dedicate to tuning it. In the meantime I'm going with an Aquamist methanol setup with the EOS intake manifold.

EOS intake manifold with integrated injection? I'd be very interested in hearing about your impressions once you receive .

.

HKD126 · 09-23-2017, 06:49 PM

Quote:

Originally Posted by ronanz

EOS intake manifold with integrated injection? I'd be very interested in hearing about your impressions once you receive .

.

Yep! I'm currently on a business trip for the next several weeks, but may arrange a pickup for my car while I'm gone to have the install complete by the time I get home. Haven't decided yet...

JaredG_F30 · 09-25-2017, 06:08 PM

Quote:

Originally Posted by HKD126

Per my conversations I had with both Jeff at SpeedTech and Dzenno at PTF, I would need a custom tune for this which Jeff did not offer and PTF did not have time for. I've been wanting this kit for over 3 months and was ready to pull the trigger. I however was not slapping a turbo on my car that was not able to be tuned. I've decided to go with a pretty involved meth setup right now instead. I'll buy the SpeedTech kit after winter when I can get it tuned.

I was under the impression that PTF was tuning the Speedtech car. Maybe I was misinformed. Also, from talking with PTF it's recommended that any upgraded turbo car be custom tuned. Are they just that far behind on custom tunes? What about Enzo?

HKD126 · 09-25-2017, 08:33 PM

Quote:

Originally Posted by JaredG_F30

I was under the impression that PTF was tuning the Speedtech car. Maybe I was misinformed. Also, from talking with PTF it's recommended that any upgraded turbo car be custom tuned. Are they just that far behind on custom tunes? What about Enzo?

PTF was working with Jeff tuning the car, yes. It would be foolish of them to not work together with another company trying to move the platform forward.

Of course you should have any car with an upgraded turbo or any serious performance mods custom tuned. It's asinine to think otherwise. Dzenno told me they wouldn't have time to do until custom tuning was was released for BM3.

JaredG_F30 · 09-26-2017, 11:13 AM

Quote:

Originally Posted by HKD126

PTF was working with Jeff tuning the car, yes. It would be foolish of them to not work together with another company trying to move the platform forward.

Of course you should have any car with an upgraded turbo or any serious performance mods custom tuned. It's asinine to think otherwise. Dzenno told me they wouldn't have time to do until custom tuning was was released for BM3.

Agreed but isn't custom tuning capability already released for BM3?

HKD126 · 09-26-2017, 12:40 PM

Maybe? I'm not sure. I had this conversation a over a month ago. My goal was to have had the kit purchased, installed and tuned before I left on another trip.

JaredG_F30 · 09-26-2017, 03:07 PM

Quote:

Originally Posted by HKD126

Maybe? I'm not sure. I had this conversation a over a month ago. My goal was to have had the kit purchased, installed and tuned before I left on another trip.

According to the BM3 facebook group, the answer is yes. Even though PTF has an OTS map for the PS2 turbo upgrade, for example, it was recommended that I get a custom tune through PTF or another tuner (Enzo possibly). Ideally, PTF would release an OTS map for the Speedtech kit that can be loaded after installation and then have a custom tune that is basically a tweaked version of the OTS map based on logs. I'm not sure if an OTS map has been created for the Speedtech setup so waiting on that.

hardparker · 10-26-2017, 11:35 PM

Before I even knew that their awesome cast manifold was available for sale separately, they're sold out.

Does anyone know if they plan on another production run, or are those full kits currently on sale the last of that endeavor?

SeanWRT · 10-27-2017, 02:08 AM

What's the point of buying turbofold separately when it only fits EFR unit from their kit?

hardparker · 10-27-2017, 08:16 AM

Quote:

Originally Posted by SeanWRT

What's the point of buying turbofold separately when it only fits EFR unit from their kit?

I have an X3 and fabrication skills. Not all the parts in their kit are likely to work on the X3, I'd think. Plus, I can piecemeal $1000 in parts at a time without the wife getting too suspicious.

JaredG_F30 · 10-27-2017, 10:09 AM

I would really like to see this kit mature. Is it dead in the water?

Whistlefist · 10-27-2017, 10:54 AM

Quote:

Originally Posted by SeanWRT

What's the point of buying turbofold separately when it only fits EFR unit from their kit?

It should fit any turbo with the same exhaust housing as the EFR in their kit, which is most likely a T4 Twin Scroll housing if I had to guess.

peopleschoice1 · 11-02-2017, 09:10 AM

anyone else try this kit yet?

09-21-2017, 07:04 PM	#158
JaredG_F30 Lieutenant Colonel 1106 Rep 1,499 Posts Drives: 2014 335i, M-Sport, Manual Join Date: Dec 2016 Location: Raleigh, NC iTrader: (0)	Anybody pull the trigger on this yet? __________________ 2014 F30 335i, M-Sport, 6MT, V804s, custom exhaust, CTS Turbo Intake & IC, FTP CP, VRSF DP, TMS Strut Brace, BM3 Stg 2, AEM WMI, H&R Sport Springs (381 whp, 429 wtq on Cali 91oct before WMI). SPI Films Blog/DIY Vids
	Appreciate 0 Quote

09-23-2017, 04:43 PM	#161
HKD126 Captain 347 Rep 801 Posts Drives: 2014 335i, 2009 335xi Join Date: Jun 2016 Location: Wisconsin iTrader: (0)	I was going to buy it over a month ago, but PTF didn't have time to dedicate to tuning it. In the meantime I'm going with an Aquamist methanol setup with the EOS intake manifold.
	Appreciate 0 Quote

09-26-2017, 12:40 PM	#169
HKD126 Captain 347 Rep 801 Posts Drives: 2014 335i, 2009 335xi Join Date: Jun 2016 Location: Wisconsin iTrader: (0)	Maybe? I'm not sure. I had this conversation a over a month ago. My goal was to have had the kit purchased, installed and tuned before I left on another trip.
	Appreciate 0 Quote

10-26-2017, 11:35 PM	#171
hardparker Father of Frankenfold 299 Rep 531 Posts Drives: Yo daddy's 2014 X3 M Sport Join Date: Jan 2017 Location: Albuquerque iTrader: (2) Garage List 2013 BMW X1 [0.00] 2014 BMW X3 [0.00]	Before I even knew that their awesome cast manifold was available for sale separately, they're sold out. Does anyone know if they plan on another production run, or are those full kits currently on sale the last of that endeavor? __________________ F25 X3 35i M Sport \| Frankenfold 6662 \| VRSF Race IC \| FTP CP \| BM3 tuned \| XDI-35 HPFP \| Stage 2 LPFP \| Ethanol mixed \| WMI \| Oil cooler \| xHP \| X5/550i brakes
	Appreciate 0 Quote

10-27-2017, 02:08 AM	#172
SeanWRT Colonel 3179 Rep 2,577 Posts Drives: E90 M3 & F87 M2 Join Date: Sep 2015 Location: Shanghai iTrader: (1)	What's the point of buying turbofold separately when it only fits EFR unit from their kit? __________________ Lemania 2320
	Appreciate 0 Quote

10-27-2017, 10:09 AM	#174
JaredG_F30 Lieutenant Colonel 1106 Rep 1,499 Posts Drives: 2014 335i, M-Sport, Manual Join Date: Dec 2016 Location: Raleigh, NC iTrader: (0)	I would really like to see this kit mature. Is it dead in the water? __________________ 2014 F30 335i, M-Sport, 6MT, V804s, custom exhaust, CTS Turbo Intake & IC, FTP CP, VRSF DP, TMS Strut Brace, BM3 Stg 2, AEM WMI, H&R Sport Springs (381 whp, 429 wtq on Cali 91oct before WMI). SPI Films Blog/DIY Vids
	Appreciate 0 Quote

11-02-2017, 09:10 AM	#176
peopleschoice1 Private 35 Rep 98 Posts Drives: 13' 335i Msport / 960whp Supra Join Date: Sep 2011 Location: NY iTrader: (0)	anyone else try this kit yet?
	Appreciate 0 Quote