10-31-2019, 10:53 AM | #1 |
Lieutenant Colonel
724
Rep 1,756
Posts |
F32 wheel offset question
I have a set of 17x8 ET 20 Style 81 wheels with 225/50 17 tires I would like to use for winter on my F32 428xi. I know I'd need a hubcentric ring for the hub, but would the ET20 be a problem on the car?
TIA
__________________
2016 428ix, r, 2018 430iC, 2018 330it
Last edited by amancuso; 11-01-2019 at 08:01 PM.. |
11-03-2019, 02:31 PM | #2 |
Cheapskate
4447
Rep 4,993
Posts |
It'll be close but probably fine at stock ride height. Definitely can't go wider than 225. Brake clearance might be an issue if you have the brembo calipers.
|
Appreciate
1
~STREETDREAMS~40.50 |
11-03-2019, 06:31 PM | #3 |
Lieutenant Colonel
724
Rep 1,756
Posts |
Thank you.
__________________
2016 428ix, r, 2018 430iC, 2018 330it
|
Appreciate
0
|
11-06-2019, 01:35 PM | #4 |
Modder of everything I own
147
Rep 491
Posts |
I have 19x9.5 ET20 with 255/35ZR19, they poke out about 3/4" past the edge of my fender with stockish camber. Like was mentioned above it will be close but should work at stock height.
__________________
2013 BMW 335xi F30 N55 PWG/VRSF DP/ER CP/Injen CAI/AA FMIC/JB4 map 7/Fuel= E50 w/ E85:93oct/Stock LPFP & HPFP/CATuned coilovers/Megan Racing Rear Swaybar/Powerflex Rear Subframe Bushing Inserts/Dual aFe Power Mach Force Mufflers/Resonator Delete/MHD & BMS Race BEF
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|