[F31Bimmerman]

So I'm trying to code my car, 2016 435i xdrive. I downloaded the latest files and have psdzdata 56.4 and esys 3.24.3. I can load and code pretty much any cafd except for fembody where I get the error below. Can any one help?

FEM_BODY [40] [myvin]
readCPS o.k.
cafd_00000794-014_040_122 Fehler:
File for "cafd_00000794-014_040_122" not found! [C012]

[TMD29]

Have you already tried injecting new cafd?

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level displayed => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.

[smithf80]

Originally Posted by TMD29

Have you already tried injecting new cafd?

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level displayed => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.

^do what he said, that should work as long as the Detect CAF for SWE finds something to inject.

[F31Bimmerman]

I'll give it a try and report back. I was wondering if my new car happened to have and even newer version of the psdzdata files..

[TMD29]

Originally Posted by F31Bimmerman

I'll give it a try and report back. I was wondering if my new car happened to have and even newer version of the psdzdata files..

It's not likely your car left the factory with something newer than psdzdata 56.4.

[F31Bimmerman]

Just wanted to update that this worked. I was able to code the FEMBODY without issue following the procedure described above.

Thanks TMD29!

[TMD29]