[Jamrockbwoy]

Anyone know the parameters to change for the delay time for window rollup/down via keygob and comfort access?

I have a F32

[TMD29]

Fem_Body 3053 Komfort_Oeff_Hinten>(time delay opening between front window and rear windows)
Fem_Body 3053 Komfort_Oeff_Shd>(time delay opening between front window and moon roof)
Fem_Body 3053 Komfort_Schl_Vorne>(delay between closing rear and front windows)
Fem_Body 3053 Komfort_Schl_Shd >(delay between closing front windows and moon roof)

[Jamrockbwoy]

Originally Posted by TMD29

Fem_Body 3053 Komfort_Oeff_Hinten>(time delay opening between front window and rear windows)
Fem_Body 3053 Komfort_Oeff_Shd>(time delay opening between front window and moon roof)
Fem_Body 3053 Komfort_Schl_Vorne>(delay between closing rear and front windows)
Fem_Body 3053 Komfort_Schl_Shd >(delay between closing front windows and moon roof)

Thanks Man. Do you know if its possible to get them to roll up/roll down without holding the button?

[TMD29]

Originally Posted by Jamrockbwoy

Thanks Man. Do you know if its possible to get them to roll up/roll down without holding the button?

I'm not aware of such code.

[lemonchicken]

Originally Posted by Jamrockbwoy

Thanks Man. Do you know if its possible to get them to roll up/roll down without holding the button?

This! Very annoying to hold button down or stand there holding the door handle.

[TMD29]

Originally Posted by lemonchicken

This! Very annoying to hold button down or stand there holding the door handle.

You can speed up the process a bit. Here is my settings:

KMFRT_OEFFNEN - [Comfort Open: minimum time requirement] - This is set to 05 and the windows go down after holding button .5 sec
KMFRT_OEFF_SHD - [Delay between the front windows and SHD (Moon Roof) on Opening] - I've set this to 05 (0.5sec)
KMFRT_OEFF_HINTEN to zero, regardless whether you have rear windows or not.
KOMFORT_SCHL_VORNE --> Delay between closing rear then front windows, default = 05
KOMFORT_SCHL_SHD --> Delay between closing front windows then SunRoof, default = 23>change to 05