05-26-2016, 11:24 AM | #1 |
First Lieutenant
15
Rep 320
Posts |
i-Drive display glitch
I have had two issues with my display since getting it (2013 328 x-drive):
1. Often times, if my display is set to a certain screen (ie radio), if I stop and start the car, or go into reverse and then drive, it will change screens. This probably happens 50 to 75% of the time. Not earth shattering, but an annoyance. 2. Roughly 20% of the time, my split screen information disappears. When this occurs, the main screen does not increase in size to fill the full width of the screen, but the right side of the screen containing split screen info simply disappears (goes black). When I go to the split screen option, it still shows it as being checked off, so to re-enable it, I have to uncheck it and then check it again. These issues have been brought up to my dealer and each time, they say they've done a software update and tried it at least "40 times" and no issues. The last time, after they told me this, I picked the car up after hours and as I'm pulling away, but issues occurred. I am planning on changing cars shortly, but curious if anyone else experienced anything like this? |
Post Reply |
Bookmarks |
|
|