06-09-2016, 07:42 AM | #1 |
Private
7
Rep 66
Posts
Drives: 335i X drive
Join Date: Nov 2012
Location: MA - USA - EARTH
|
DIY- Black Exhaust ends- no more constantly cleaning chrome pipes.
I was going to get the black chrome tips cause the chrome ones show all the black exhaust stuff always and I am sick of cleaning it. Also over time it just eats away at the chrome and looks like crap anyways.
I figure before I spend forever banging the damn tips off my car with a rubber mallet (tried it, those bastards are on pretty good). I would clear up the problematic area only as I do still like the chrome. Decided to just coat the ends of the exhaust and leave the rest chrome. I took some 3" wide tape and covered the sides so the tape stood out about 2" off the exhaust. Leaving the painted part un tapped. It was nice because I didnt need to wast time lining anything up I just put tape around the edge of the exhaust and it did all the lining up for me. Grabbed a can of black grill paint and did a few coats. Came out pretty decent for a quick project. The lines you see are the water from the exhaust, the pain is dry at the point of the pic was taken. Last edited by lunchbox; 06-09-2016 at 07:48 AM.. |
06-10-2016, 07:23 AM | #2 |
A family of bimmers
2747
Rep 7,742
Posts |
now they just look really really dirty. i just wipe them once a week while washing and all the soot comes right off.
__________________
2018 PB/Black G01 X3M40i | 699M | ZDA | ZPP | ZPX | Maxton front lip | X3M vents | 15mm Spacers | Diamond G20 style grills |
Appreciate
0
|
06-15-2016, 06:48 AM | #5 |
Private
7
Rep 66
Posts
Drives: 335i X drive
Join Date: Nov 2012
Location: MA - USA - EARTH
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|