bootmod3: Rolling ANTILAG (DEMO) - Advanced End User/Tuning Features (Part 3)

proTUNING Freaks · 10-29-2020, 01:07 PM

In the previous video we demonstrated bootmod3's on-the-fly map switching using steering wheel controls allowing users to flash the car once and then select between any 4 maps that can be custom tuned to suit your modifications, octane and racing needs:

https://f80.bimmerpost.com/forums/sh....php?t=1768838

In today's demo video we're showing another new tuning feature that is in the works by the bootmod3 dev team called ANTILAG. To trigger it you simple press UP and hold on the cruise button on the left side of the steering wheel. While holding it, the DME switches to an internal antilag tuning strategy and tables where antilag RPM, ignition timing, accelerator pedal threshold, target load/boost and other values can be configured to dial it in as needed.

In this demo, vehicle is a 2015 BMW F80 M3, RPM is set to around 4k rpm, with accel pedal threshold at 100% (driver needs to go WOT to trigger it). In 1-2 seconds after triggering it, this car running ASR Kratos turbos, is able to hit 30psi! Turbo lag goodbye!

We've added logic to ensure pressing the button UP on its own does not trigger ANTILAG mode until pedal and RPM thresholds are reached (both of which are tunable in the map). In addition, any of the 4 on-the-fly switchable maps can be set to have antilag enabled or disabled so the user can configure it to their needs (e.g. map1 no antilag, but map4 all the antilag/boost, etc.)

bootmod3's rolling antilag feature is end user configurable from the app on-demand so any of its parameters can be altered on-demand while driving without turning the engine off and reflashing.

All the advanced tuning features such as map switching, antilag, flex fuel, are in progress of being ported as many if not all vehicles currently supported by bootmod3.

Hope you enjoy this video!

JaredG_F30 · 10-29-2020, 01:33 PM

This is awesome! When do you expect the steering wheel control map switching and anti-lag to be released?

n55david · 10-29-2020, 04:34 PM

looking forward to seeing this in action. going to make stock turbos crazy and aftermarket turbos spool like stock.

mike@x-ph.com · 10-30-2020, 09:24 AM

Quote:

Originally Posted by Phantom10R

looking forward to seeing this in action. going to make stock turbos crazy and aftermarket turbos spool like stock.

10-29-2020, 01:07 PM	#1
proTUNING Freaks BimmerPost Supporting Vendor 4490 Rep 1,862 Posts Drives: powered by bootmod3 Join Date: Oct 2014 Location: www.protuningfreaks.com \| www.bootmod3.com iTrader: (0)	bootmod3: Rolling ANTILAG (DEMO) - Advanced End User/Tuning Features (Part 3) In the previous video we demonstrated bootmod3's on-the-fly map switching using steering wheel controls allowing users to flash the car once and then select between any 4 maps that can be custom tuned to suit your modifications, octane and racing needs: https://f80.bimmerpost.com/forums/sh....php?t=1768838 In today's demo video we're showing another new tuning feature that is in the works by the bootmod3 dev team called ANTILAG. To trigger it you simple press UP and hold on the cruise button on the left side of the steering wheel. While holding it, the DME switches to an internal antilag tuning strategy and tables where antilag RPM, ignition timing, accelerator pedal threshold, target load/boost and other values can be configured to dial it in as needed. In this demo, vehicle is a 2015 BMW F80 M3, RPM is set to around 4k rpm, with accel pedal threshold at 100% (driver needs to go WOT to trigger it). In 1-2 seconds after triggering it, this car running ASR Kratos turbos, is able to hit 30psi! Turbo lag goodbye! We've added logic to ensure pressing the button UP on its own does not trigger ANTILAG mode until pedal and RPM thresholds are reached (both of which are tunable in the map). In addition, any of the 4 on-the-fly switchable maps can be set to have antilag enabled or disabled so the user can configure it to their needs (e.g. map1 no antilag, but map4 all the antilag/boost, etc.) bootmod3's rolling antilag feature is end user configurable from the app on-demand so any of its parameters can be altered on-demand while driving without turning the engine off and reflashing. All the advanced tuning features such as map switching, antilag, flex fuel, are in progress of being ported as many if not all vehicles currently supported by bootmod3. Hope you enjoy this video! __________________ YouTube Channel [NEW] \| Facebook User Group (20,000+ members) \| Tech Support Website \| Wiki \| FAQ \| iOS App \| Android App \| bootmod3 Web Sales Support Email: sales@protuningfreaks.com \| Tech Support Email: support@protuningfreaks.com
	Appreciate 1 MAKH 588.50 Tweet Quote

10-29-2020, 01:33 PM	#2
JaredG_F30 Lieutenant Colonel 1106 Rep 1,499 Posts Drives: 2014 335i, M-Sport, Manual Join Date: Dec 2016 Location: Raleigh, NC iTrader: (0)	This is awesome! When do you expect the steering wheel control map switching and anti-lag to be released? __________________ 2014 F30 335i, M-Sport, 6MT, V804s, custom exhaust, CTS Turbo Intake & IC, FTP CP, VRSF DP, TMS Strut Brace, BM3 Stg 2, AEM WMI, H&R Sport Springs (381 whp, 429 wtq on Cali 91oct before WMI). SPI Films Blog/DIY Vids
	Appreciate 1 MAKH 588.50 Quote

10-29-2020, 04:34 PM	#3
n55david Check out my Youtube @n55david! 1296 Rep 3,529 Posts Drives: 2017 m240i, 2015 X3 x35i Join Date: Aug 2018 Location: Michigan USA iTrader: (0) Garage List 2017 m240i xDrive [0.00] 2015 X3 x35i [0.00] 2015 335i xdrive [0.00]	looking forward to seeing this in action. going to make stock turbos crazy and aftermarket turbos spool like stock. __________________ 2017 m240i xDrive 10.99@122.86mph bootmod3 stage 2+ ots 2015 335i xDrive 10.95@124.99mph w/bm3 - SOLD 2015 X3 x35i pwg 12.96 catless w/bm3 stage 2 93 ots IG: @n55david For pics and updates! Youtube: @ n55david For videos or Racing etc
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search