[marcospoffo]

In X6 M 2016 I have:

01, 01, 0C, 01, 01, 01, 01, 01, 01, 0B

Do I have to change 0C to 0A?

Follow the attached image:

View post on imgur.com

[Almaretto]

Originally Posted by marcospoffo

In X6 M 2016 I have:

01, 01, 0C, 01, 01, 01, 01, 01, 01, 0B

Do I have to change 0C to 0A?

Follow the attached image:

View post on imgur.com

Yes.

[marcospoffo]

Thankss

Originally Posted by Almaretto

Yes.

[Almaretto]

Originally Posted by marcospoffo

Thankss

[Don Juan]

Originally Posted by HZX540e

Posting here for the benefit of the entire community Almaretto sent me the instructions below and they worked like a charm on the 2016 X5 40e, now the Halos are at 100% with DRL (which they were always), parking light and high beam. Thank you Almaretto you are amazing


Must change BOTH TMS Modules otherwise your car will look like it has a bruised eye or is winking

3005 Leuchtmittelmatrix 1, F8

Tagfahrlicht (German for daytime running light)
00 03 00 00 00 04 00 00 64 03 00 00 64 23 00 00 <-- this is the default value

Standlicht Modus 1 / 2 / 3
00 03 00 00 64 03 00 00 64 03 00 00 2E 24 00 00 (must change all three modus)

Welcome Light 1
00 03 00 00 64 03 00 00 64 03 00 00 2E 24 00 00 (optional)

Parklicht
00 03 00 00 00 03 00 00 64 03 00 00 2E 24 00 00 (optional for street side parking lamp)

Follow Me Home
00 03 00 00 64 03 00 00 64 03 00 00 2E 24 00 00 (optional)

Remote Light
00 03 00 00 64 03 00 00 64 03 00 00 2E 24 00 00 (optional)

So Corona rings are dimmed from 100% DRL to 46% with low beams (64 Hex = 100 Decimal; 2E Hex = 46 Decimal). If you want 100, you change to blue hex in Standlicht Modus 1, 2, & 3 to 64 to match Tagfahrlicht; or you can choose any other desired percentage (eg, 50 = 80%). Plus, you can also set 'Welcome', 'Follow me home', or 'Remote lights,' to the same or desired percentage. And, remember to change both TMS (1082/ 1083).

The only one I didn't do is the parklicht which controls the intensity of the street side parking light. I get hassled enough when I have either side on and they're only 46%, imagine the number of people knocking on my door from three blocks down to tell me my lights are on

These were the best 2 explanations I found after hours of searching for my 2016 F15. It is finally coded with bright DRLS!! thank you guys.....

NOw is you please can help me decipher where the damn drl files are for an I3 Will appreciate tremendously...I did the original changes to :
Increase DRL Brightness to be brighter (increases voltage to the LED Bulbs)
3062  MAPPING_STANDL_V_L_PWM_LEVEL_1 set to: 13.7v/100%
3062  MAPPING_STANDL_V_R_PWM_LEVEL_1 set to: 13.7v/100%
3062  MAPPING_PARKL_1_V_L_PWM_1_LEFT set to: 13.7v/100%
3062  MAPPING_PARKL_1_V_L_PWM_2_RIGHT set to: 13.7v/100%
but nothing

here is a screen shot of my files... any help will be much much appreciated

[Mwahab]

Well Done Guys!

[irishandrew]

Originally Posted by phattbam

This would work on my pre-LCI?

would the brows and regular orange signal lights flash at the same time when used now?

phattbam did you ever try this? Tempted to try it in my MY17 F36 with Xenons - so I have the white brows, not the LCI style LED lights with brow turn signals - not sure how it would look having white brow flashing along with orange indicator!

-Andrew.

[userix]

Good work!

Does anyone know if this will work the Adaptive LED headlight F15 X5 2016?

[Almaretto]

Originally Posted by userix

Good work!

Does anyone know if this will work the Adaptive LED headlight F15 X5 2016?

Same concept, different ECU's. F015/F016/F085/F086 uses FLE (CAFD_000024C3)

[userix]

Originally Posted by Almaretto

Same concept, different ECU's. F015/F016/F085/F086 uses FLE (CAFD_000024C3)

Cool. So instead of TMS module, I use the FLE?

[Almaretto]

Originally Posted by userix

Cool. So instead of TMS module, I use the FLE?

Yes. 2014 F015's have TMS/LHM.
Our 2016 F015's have FLEx2.

[Ryan L]

Anyone have night time photos of the 100% brightness DRLs w/ low beams?

[stvding]

I heard from Nick Murry's youtube vid that high beam of LED is not 100% for NA market.


Mine is f32 2016 435i with adaptive led. I already coded anti-dazzle and variable light distribution. Not sure if the high beam of my LED is at its full strength.

[HZX540e]

Originally Posted by Don Juan

These were the best 2 explanations I found after hours of searching for my 2016 F15. It is finally coded with bright DRLS!! thank you guys.....

NOw is you please can help me decipher where the damn drl files are for an I3 Will appreciate tremendously...I did the original changes to :
Increase DRL Brightness to be brighter (increases voltage to the LED Bulbs)
3062  MAPPING_STANDL_V_L_PWM_LEVEL_1 set to: 13.7v/100%
3062  MAPPING_STANDL_V_R_PWM_LEVEL_1 set to: 13.7v/100%
3062  MAPPING_PARKL_1_V_L_PWM_1_LEFT set to: 13.7v/100%
3062  MAPPING_PARKL_1_V_L_PWM_2_RIGHT set to: 13.7v/100%
but nothing

here is a screen shot of my files... any help will be much much appreciated

You are welcome, but I am not the expert. The people that helped me are listed in my post and they should be able to help. I am a kindergartner compared to these docs.

[Almaretto]

Originally Posted by stvding

I heard from Nick Murry's youtube vid that high beam of LED is not 100% for NA market.


Mine is f32 2016 435i with adaptive led. I already coded anti-dazzle and variable light distribution. Not sure if the high beam of my LED is at its full strength.

If you code NGHB, then they are at 100%

Separately, Angel eyes can be set at 100%, but it is glaring and headlamps look washed out.

[stvding]

Originally Posted by Almaretto

If you code NGHB, then they are at 100%

Separately, Angel eyes can be set at 100%, but it is glaring and headlamps look washed out.

Thanks

[marcospoffo]

Hello,

Mini JCW 16. Any ideia?

02, 02, 02, 02, 07, 07, 02

[Almaretto]

Originally Posted by marcospoffo

Hello,

Mini JCW 16. Any ideia?

02, 02, 02, 02, 07, 07, 02

You have to compare DRL to POLI1_Idx

[MrMarvin]

Just coded this, looks awesome on my black 330e! Thank you!

[MrMarvin]

Originally Posted by MrMarvin

Just coded this, looks awesome on my black 330e! Thank you!

Apologize for the double post, but these are stupid bright. They blind oncoming cars at night, although i like the look i'd like to try 60% or 70% instead. I tried changing my werte values to 0F instead of 04 as is now. But the led just turned off, that car that 0F worked for seemed to be a us spec, mine is a eu spec. Is there any way for me to calculate this werte value?

Thanks!

[Almaretto]

Originally Posted by MrMarvin

Apologize for the double post, but these are stupid bright. They blind oncoming cars at night, although i like the look i'd like to try 60% or 70% instead. I tried changing my werte values to 0F instead of 04 as is now. But the led just turned off, that car that 0F worked for seemed to be a us spec, mine is a eu spec. Is there any way for me to calculate this werte value?

Thanks!

You have to look at the intensities in the section below.

2E = 46%
3C = 60%
64 = 100%

[MrMarvin]

Originally Posted by Almaretto

You have to look at the intensities in the section below.

2E = 46%
3C = 60%
64 = 100%

Alright, but the 04 value gives me 100% as of now, so the 64 is basically the same? Or maybe the 04 value isn't 100%? Sorry if i'm being dumb!