09-17-2019, 08:14 AM | #23 |
Private
26
Rep 75
Posts |
Well the best made plans.... you know what they say... actually did the install last night.. First for the install.. fairly straight forward.. even though there's no instructions.. the video above helped greatly.. I wound up just removing the intake.. just seemed easier. Had to re check wiring a few times as both new leads are the same color.. and just was nervous not really knowing if it didn't matter.. but as it turns out and stated in the above video it doesn't matter which side connects to which side.. The fuel line.. is a SOB of a tight fit on the pressure fittings,, even with heat.. but I got it on the fittings... loved the new knock sensor bolt.. and all in all a fairly straight forward install and well made kit. Took me three hours. MHD tune option was straight forward.
Driving.. always subjective.. didn't pull a log last night .. put the car definitely feels better, pulls smoother, and just feels stronger,, weird.. but what can I say.. the ol butt dyno in action. |
Appreciate
1
BMW DIY Guy3001.50 |
09-17-2019, 08:19 AM | #24 |
Private
26
Rep 75
Posts |
|
Appreciate
0
|
09-19-2019, 03:15 PM | #26 | |
Gettin It Figured Out
1818
Rep 2,669
Posts |
Quote:
Agree....absolutely no reason plug should ever be cut and/or sliced in any way. Should be 100% PnP .
__________________
|
|
Appreciate
0
|
09-22-2019, 08:40 AM | #29 |
Gettin It Figured Out
1818
Rep 2,669
Posts |
__________________
|
Appreciate
0
|
10-15-2019, 02:18 PM | #30 |
Captain
1169
Rep 969
Posts |
Finally got a chance to hit the rollers again! 528 whp and 570 wtrq Again this is with PS2 Turbo, FBO, XDI-35 HPFP, custom tune + supporting mods. Runs were all consistent with and awesome power curve as well. Car is running FLASH ONLY and 93oct/boostane for these runs. Car is certainly a blast to drive!
__________________
|
Appreciate
0
|
10-15-2019, 09:23 PM | #31 | |
Colonel
1072
Rep 2,351
Posts |
Quote:
Furthermore - no responsible tuner would push the HPFP that hard.
__________________
M135i 8AT PWG, MHD, Pure Stage2, WMI via Torqbyte CM5-LT, Custom tuned by PureBoost
(A Dane in China) |
|
Appreciate
0
|
10-15-2019, 09:30 PM | #32 | |
Colonel
1072
Rep 2,351
Posts |
Quote:
__________________
M135i 8AT PWG, MHD, Pure Stage2, WMI via Torqbyte CM5-LT, Custom tuned by PureBoost
(A Dane in China) |
|
Appreciate
0
|
10-16-2019, 08:27 AM | #33 |
Captain
1169
Rep 969
Posts |
__________________
|
Appreciate
0
|
10-16-2019, 09:10 AM | #34 |
Colonel
962
Rep 2,652
Posts |
2K damn that's a tough pill to swallow. Anyone have one to donate?
__________________
2016 340i xDrive - BM3 Stage 2 93 OTS - xHP Transmission Tune Stage 2 - B58TU HPFP - Bilstein B14 - VRSF Catless DP - Kyostar CAI
|
Appreciate
0
|
11-20-2019, 04:27 PM | #36 |
Colonel
3002
Rep 2,989
Posts
Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA
|
Bumping the thread for anyone who needs the DIY install after a TTFS HPFP purchase. TTFS is running a Black Friday sale this Friday through midnight Black Friday of $300 off the pumps.
The install isn't hard, the benefits are worth it.. any questions give me a shout.
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** 'Nimona' G87 M2 Build Thread 'Lillith' F87 M2 Competition Build Thread |
Appreciate
0
|
11-20-2019, 04:43 PM | #37 | |
Gettin It Figured Out
1818
Rep 2,669
Posts |
Quote:
Does this match the "bm3/MHD" member discount or.... if you're bm3/MHD is it additional? .
__________________
|
|
Appreciate
0
|
11-20-2019, 04:45 PM | #38 |
Colonel
3002
Rep 2,989
Posts
Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA
|
Honestly don't know as I didnt know about the MHD discount.. don't know if they would stack but can't hurt to ask! The worst they can say is no. 8)
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** 'Nimona' G87 M2 Build Thread 'Lillith' F87 M2 Competition Build Thread |
Appreciate
0
|
11-20-2019, 04:50 PM | #39 | |
Gettin It Figured Out
1818
Rep 2,669
Posts |
Quote:
Agree...but, you'd still have to factor in the cost of bm3/MHD platform. If it's the same cost, why not just check the bm3/MHD discount option and purchase either platform to run? .
__________________
|
|
Appreciate
0
|
11-21-2019, 10:53 AM | #40 |
Major
485
Rep 1,105
Posts |
Pricing for the sale is $300 off the discounted amount $1995... so Black Friday deal is $1695!
__________________
435i M-Sport | Pure Stage 2 Turbo | MHD Tune | XHP Stage 3 | Wagner Comp Evo 2 | MPE | Evolution Racewerks CP/DP/TIC | M-LSD | XDI-35 |
|
Appreciate
1
Stanio65.00 |
11-21-2019, 08:50 PM | #41 |
Father of Frankenfold
299
Rep 531
Posts
Drives: Yo daddy's 2014 X3 M Sport
Join Date: Jan 2017
Location: Albuquerque
|
That's about the price it should be, if you look at all of the other XDI pumps for other car makes out there.
__________________
F25 X3 35i M Sport | Frankenfold 6662 | VRSF Race IC | FTP CP | BM3 tuned | XDI-35 HPFP | Stage 2 LPFP | Ethanol mixed | WMI | Oil cooler | xHP | X5/550i brakes
|
Appreciate
1
ronanz1818.00 |
11-21-2019, 09:18 PM | #42 | |
Gettin It Figured Out
1818
Rep 2,669
Posts |
Quote:
#BMWTax #EpsteinDidntKillHimself #LookIntoIt .
__________________
|
|
Appreciate
0
|
12-01-2019, 09:55 PM | #43 | |
Enlisted Member
10
Rep 41
Posts |
Quote:
a. what turbo are you running? b. what custom tune do you have? |
|
Appreciate
0
|
12-02-2019, 12:04 AM | #44 | ||
Colonel
3002
Rep 2,989
Posts
Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA
|
Quote:
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** 'Nimona' G87 M2 Build Thread 'Lillith' F87 M2 Competition Build Thread |
||
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
hpfp, tuningtechfs, xdi, xdi-35 |
Thread Tools | Search this Thread |
|
|