09-21-2016, 03:53 PM | #10 | |
Major General
2374
Rep 8,364
Posts |
Quote:
There is also a group closer to Encinita. See the following: |
|
Appreciate
0
|
09-29-2016, 05:40 PM | #11 |
New Member
0
Rep 23
Posts |
I am in Bay Area looking to code few options for my ride. A Team Viewer session would really help. Please let me know of you'd be able to do this in the coming week.
|
Appreciate
0
|
09-29-2016, 05:48 PM | #12 |
Major General
2374
Rep 8,364
Posts |
|
Appreciate
0
|
10-21-2016, 01:57 AM | #15 |
Major General
2374
Rep 8,364
Posts |
|
Appreciate
0
|
02-20-2020, 11:58 AM | #19 |
First Lieutenant
119
Rep 309
Posts |
|
Appreciate
0
|
02-21-2020, 12:24 PM | #20 | |
Enlisted Member
12
Rep 47
Posts |
Quote:
DSC coding Using Esys 3.23.4 with psdzdata 51.1 1. Connect=>Expert Mode=>Coding=>Read FA=>Save FA 2. Editiors & Viewers=>FA-Editor=>Go to HO-Wort and right click to "Edit", then type (means add) "SPBR" under HO-Wort folder 3. Highlight the FA, "Activate FA" and "Calculate FA" to verify no error is found after adding the SPBR. 4. Check the Vehicle Profile to locate the "aftermarket retrofit" and verify the "SPBR_18_ZOLL_SPORTBRAKE" is added to the folder 5. Write FA to the car. No confirmation window will pop up after saving the FA to the car. So you need to go to next step for verification. 6. Expert Mode=>Coding=>Read FA. You are able to see the SPBR being added to the HO-Wort folder on your car. 7. Read SVT, and locate the "DSC" (File Folder SVT/ECU/DSC), then right click the "DSC" folder and select "Code". Coding would begin immediately. 8. Wait until the coding is finished, and repeat Step 1 to save a copy of the new FA. 9. Unplug the PC from the car. The M-Performance Brake is now enable and enjoy the genuine M-Performance Braking experience. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|