04-03-2024, 11:08 AM | #1 |
New Member
0
Rep 6
Posts |
2013 335i Fuel Pressure
Hello,
I have a 2013 335i RWD. Listed below are the mods: CP/Catless DP/Intercooler VRSF Dorch Stage 1 HPFP Spool Stage 2 LPFP CTS Intake Here's the datalog on startup: https://www.bootmod3.net/log?id=65fd...c1ed1705a7af3d I'm getting codes: 11AC02 11A002 11A401 11B401 You'll see in the datalog, HPFP targets and actuals fall off a few moments after starting the car, and the car is put into limp mode. If I disable the codes in BM3, I'm able to start the car and drive perfect without it being in limp mode. Sometimes, limp mode will reoccur - then I just restart the car and it goes away. I've heard things about the EKPM and the issues it's presenting with the Spool Stage 2 LPFP due to extra current draw. I've removed the backseat that covers the EKPM to see if there's an issue regarding overheating. I haven't noticed a difference, even on cold days with the seat off. It can't be the HPFP, as the HPFP works perfectly at times, and from what Dorch has told me, the HPFP cannot fail intermittently. Any pointers? |
04-03-2024, 12:00 PM | #2 | |
Private First Class
87
Rep 175
Posts |
Quote:
__________________
VRSF RACE IC, FTP CP, VRSF CATLESS DP, BORLA ATAK CATBACK, CTS TURBO INTAKE, MST V2 INLET, PURE STAGE 2, TURBOSMART BOV,FTP TURBO OUTLET, SPOOL FX180, BM3 ETHANOL ANALYZER, PRECISION RACEWORKS COILS, BM3 STAGE 2+ E30
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|