[Solid67]

Quick update. I just reached my office and I popped the hood again and didn't smell anything this time. Maybe yesterday it was the parts burning off any chemicals? I just want to make sure that the pipe is not rubbing into any pulleys. At idle I don't hear anything funky or weird noises from inside or outside the car with the hood popped as well.

[MoeTE87]

Originally Posted by CntryClub007

Got it to fit! I'll type up the parts list shortly,

Hardware
1x https://www.mcmaster.com/98164a186
1x https://www.mcmaster.com/90107a011
1x https://www.mcmaster.com/94639a554

Coupler
1x Silicone Reducer, 45° bend - http://www.siliconeintakes.com/bendi...bow-p-906.html

Could probably do a 30° reducer, if anyone finds one, definitely let me know, I'll buy it and try it out. Would like to get the intake "up" a bit more vs. "down"...obviously I had to trim my silicone adapter on both ends carefully to get it to fit.

How much did you have to trim off the silicone adapter?


Thank you,
Jeff

[orb_weaver_24k]

Originally Posted by MoeTE87

How much did you have to trim off the silicone adapter?


Thank you,
Jeff

Curious of this as well, thinking of doing the same on my b46