01-21-2017, 05:31 AM | #1 |
New Member
5
Rep 19
Posts |
Possible to use basic 6.5" screen with NBT?
As the title suggests, is it possible to install full 609 NBT, but use the base 6.5" screen? I have all other bits, including touch module, emulator and all.
Probably a bit of a long shot, but I am still waiting for the replacement 8.8" screen as the first was cracked, and since it is weekend and all, I figured I could tinker with the install, and simple use the base screen until the new one arrives. |
01-22-2017, 11:29 AM | #3 |
New Member
5
Rep 19
Posts |
So, just gave it a try, but screen remains black, even though I did these 2 changes:
HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 6.5_800x480 HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = schmales_display I know that the NBT unit works, because everything is coded, radio working, BT and all. Just that the screen remains black. Guess I have to wait until my new screen arrives |
Appreciate
0
|
09-10-2018, 01:56 PM | #4 |
New Member
21
Rep 21
Posts |
Hello mickiii,
I'm in the same situation as you, retrofit HU_ENTRY - HU_NBT, basic I have a 6.5" screen, I would like to keep it to know already if the HU_NBT works well at first. I have the black screen as you, to correct this it is necessary to buy a screen 8.8 "? |
Appreciate
0
|
09-10-2018, 11:46 PM | #5 |
BimmerPost Supporting Vendor
668
Rep 1,980
Posts
Drives: 2020 G20 320i M Sport
Join Date: Apr 2010
Location: Canada & HK
|
We tested this back in 2014 with no avail. Only way to be able to use NBT is to get the 8.8” screen.
__________________
CMB Solutions Limited |codemybimmer.ca
Vehicle Diagnostics | CarPlay Solutions | Retrofit & Repair Consulting/Programming steve.ma@cmbsolutionsltd.com | www.codemybimmer.ca Online Store | Remote Coding Package| ID6 Retrofit for almost all F Chassis BMWs |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|