[RSnic]

Hi,

I would like to increase the speed above which my car's PDCs cut off.

I recall reading something about coding some items. All I could find was:
REM> 3201 PDCVehicleConfig1A> CUT_OFF_SPEED to 19 (15mph)

Am I missing something?

Thank you very much

[smithf80]

I don't think so, is it not working?

Just give it a try, can't hurt.

[Halsifer]

Originally Posted by RSnic

Hi,

I would like to increase the speed above which my car's PDCs cut off.

I recall reading something about coding some items. All I could find was:
REM> 3201 PDCVehicleConfig1A> CUT_OFF_SPEED to 19 (15mph)

Am I missing something?

Thank you very much

Should be associated with the cameras, assuming you have a rear view camera. So increase the top speed of the camera being active and the PDC should follow.

REM/PMA --> V_SCHWELLE_1 (The speed when it auto disables top camera view)
REM/PMA --> V_SCHWELLE_2 (The speed when it auto disables rear camera view)
REM/PMA --> D_SCHWELLE_1 (The distance when it auto disables top camera view)
REM/PMA --> D_SCHWELLE_2 (The distance when it auto disables rear camera view)

[RSnic]

[QUOTE=Halsifer;17397013]Should be associated with the cameras, assuming you have a rear view camera. So increase the top speed of the camera being active and the PDC should follow.

Well, unfortunately, I don't have operational cameras yet. I, in fact coded the following and it works quite well:
REM> 3201 PDCVehicleConfig1A> CUT_OFF_SPEED from 0F (6mph) to 19 (15 mph)

Please note that the werte is the speed in kilometers per hour, expressed in Hexadecimal

[manitaci]

Hi all,

I want the Cut Off Speed to be around 15kmh. This because I don't need it above that speed. Very frustating in parking lots where you drive slower then 36kmh, at least I do.

REM> 3201 PDCVehicleConfig1A> CUT_OFF_SPEED is allready 0F

But somehow it won't stop showing the PDC screen untill approx 40kmh.

Important note: The comment next to CUT_OFF_SPEED states "cut off > 36kmh"

Someone know how to reduce the cut off speed to 15kmh?