09-21-2017, 07:16 PM | #24 |
Enlisted Member
3
Rep 36
Posts |
Quick question re. Tire Pressure Sensors - I assume these are the valves themselves, do I need anything else for these to work, like a special module in the car etc?
|
Appreciate
0
|
09-23-2017, 06:47 AM | #26 |
Private First Class
11
Rep 118
Posts |
|
Appreciate
0
|
09-24-2017, 03:58 AM | #27 | |
Lieutenant Colonel
352
Rep 1,772
Posts |
Quote:
In the earlier cars you will also need the control module in order to have tpms working. If you have esys, check to see whether you have an ecu called dsc100 or similar. In the later cars this ecu also controls the tpms. I have a 2017 340i and all I did was install the tpms into each wheel then coded the car. Easiest retrofit I?ve done and all for $200. |
|
Appreciate
0
|
09-25-2017, 09:27 PM | #28 | |
Enlisted Member
3
Rep 36
Posts |
Quote:
x5mad: These TPMS will give me PSI and TEMP readings (if coded) right? |
|
Appreciate
0
|
09-27-2017, 03:45 AM | #29 | ||
Lieutenant Colonel
352
Rep 1,772
Posts |
Quote:
If your car has the newer dsc ecu which has the combined tpms sensor then coding will work. Earlier cars require a separate ecu which is solely for the tpms. Earlier cars only measure the change in rolling radius of the tyre and coding will not give you psi or tyre temps. |
||
Appreciate
0
|
09-27-2017, 06:46 PM | #30 |
Enlisted Member
3
Rep 36
Posts |
|
Appreciate
0
|
08-25-2018, 03:29 AM | #37 |
First Lieutenant
55
Rep 331
Posts |
Will the extensions fit a 2017 f36 430I Gran Coupe?
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
|
Appreciate
0
|
08-26-2018, 05:39 AM | #38 |
Private First Class
11
Rep 118
Posts |
|
Appreciate
0
|
09-06-2018, 06:18 AM | #39 |
First Lieutenant
55
Rep 331
Posts |
Could you give me the measurements of the length and the screw points so i can see if it will fit.
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
|
Appreciate
0
|
10-01-2018, 12:16 AM | #40 |
First Lieutenant
55
Rep 331
Posts |
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
|
Appreciate
0
|
10-01-2018, 06:09 PM | #41 |
Private First Class
11
Rep 118
Posts |
Sorry, I'm away with work until next week. Will try to get it out to measure for you then. I don't think there are any screw points, some nice 3M double sided tape would be more than enough to secure.
|
Appreciate
0
|
12-09-2018, 08:44 AM | #42 |
Private
18
Rep 70
Posts
Drives: F30 340i (2015) Alpine White
Join Date: Dec 2018
Location: Perth, Australia
|
Appreciate an older thread, but do you still have the F30 Carbon Fibre Side Skirt Extensions for sale?
__________________
F30 340i (2015) Alpine White (see 'My Garage' to view )
|
Appreciate
0
|
03-20-2019, 01:33 AM | #44 |
Private First Class
11
Rep 118
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|