10-13-2016, 10:18 PM | #1 |
Registered
1
Rep 3
Posts |
Will these fit? F: 19x9 ET20 / R: 19x10.5 ET30?
Hello, I'm new to the forum so I apologize if starting a new thread is the incorrect thing to do for a simple question. Anyways, I purchased some wheels with the dimensions listed in the title. Fronts: 19x9 +20, 225/35/19 - Rears: 19x10.5 +30, 245/30/19 5x120...
The wheels whom I purchased from used these on a 435i on bags no problem. I am still very new to this stuff and this was my first real nice set of wheels. He said these will fit very nice for my car. I have been researching for the past day or so and I literally been on every thread I think trying to find the closest rim specs to mine. Quite a bit of people running some super aggressive setups and don't seem to have any rubbing, then some with less do. So I'm confused about this... I got an amazing deal on these wheels and tires and I hope they will actually fit! What do you guys think?? My F30 328i is sitting stock atm. Will these rub in the rears? Do I need to fender roll or have the hub shaved by mm?? Add some negative camber? Thanks very much guys!! Hope I can make these work. Last edited by Adamt916; 10-14-2016 at 12:05 AM.. |
10-14-2016, 07:52 AM | #2 |
A family of bimmers
2744
Rep 7,741
Posts |
no, front is way too aggressive. they will sit 27mm further out than stock 18x8 et34s. pretty sure without camber, stretched tires and a whole lot of low these will not fit and look ridiculous.
this thread from a few days ago is pretty much the same as yours http://f30.bimmerpost.com/forums/sho....php?t=1313678
__________________
2018 PB/Black G01 X3M40i | 699M | ZDA | ZPP | ZPX | Maxton front lip | X3M vents | 15mm Spacers | Diamond G20 style grills |
Appreciate
0
|
10-14-2016, 04:05 PM | #3 |
Registered
1
Rep 3
Posts |
[QUOTE=wdeerfield;20704412]no, front is way too aggressive. they will sit 27mm further out than stock 18x8 et34s. pretty sure without camber, stretched tires and a whole lot of low these will not fit and look ridiculous. "
I am planning on lowering it and if some camber is needed, I will do that as well. Thanks! |
Appreciate
0
|
08-12-2018, 08:45 AM | #4 | ||
Private
32
Rep 54
Posts |
Quote:
Quote:
Did it end up fitting? Thanks, J |
||
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
19x10 wheels, fitment, question |
Thread Tools | Search this Thread |
|
|