F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > 2012-2019 BMW 3 and 4-Series Forums > Regional Forums > UK > Drivers window
Vorsteiner
Post Reply
 
Thread Tools Search this Thread
      02-21-2018, 02:35 PM   #1
machman767
Private First Class
United Kingdom
28
Rep
115
Posts

Drives: 320d Sport auto
Join Date: Nov 2017
Location: Preston

iTrader: (0)

Drivers window

Hi, guys, is the drivers window supposed to close fully after one touch of the switch? Mine doesnít, have tried opening and closing it a couple of times but doesnít make any difference. Iíve again but doesnít seem to mention my issue.

Mick
Appreciate 0
      02-21-2018, 03:01 PM   #2
Ridg
Second Lieutenant
98
Rep
250
Posts

Drives: F31 330d
Join Date: Dec 2016
Location: Kent

iTrader: (0)

without actually getting in the car and checking from memory a full press closes it all the way, IIRC it's a two stage switch or a slightly longer press to get it all the way up.
Appreciate 0
      02-21-2018, 04:47 PM   #3
willjames
Major
willjames's Avatar
United Kingdom
491
Rep
1,328
Posts

Drives: F31 330d M Sport Touring Auto
Join Date: Oct 2015
Location: Dukinfield, Cheshire

iTrader: (0)

I know this sounds daft, but I think the one touch close won't work if the door is slightly ajar.

Was the door properly closed?
Appreciate 0
      02-21-2018, 05:36 PM   #4
werewolf81
Private First Class
78
Rep
147
Posts

Drives: BMW 125i
Join Date: Mar 2017
Location: North Yorkshire

iTrader: (0)

Quote:
Originally Posted by willjames View Post
I know this sounds daft, but I think the one touch close won't work if the door is slightly ajar.

Was the door properly closed?
+1

It should work with one touch, definitely unless the door isn't closed properly.
Appreciate 0
      02-21-2018, 05:45 PM   #5
DonDP
Private First Class
DonDP's Avatar
43
Rep
131
Posts

Drives: F31 330d / Z4M Coupe
Join Date: Apr 2013
Location: UK

iTrader: (0)

After some events (such as disconnected battery) you have to re-initialise the soft touch.

It doesn't read too well, but the below might help:

An initialization must be performed:
? In the event of malfunctions, e.g. no one-touch control function, no opening or if available no comfort function is possible
? After the power window drive has been replaced
? After work is carried out on the power window mechanism
? If necessary, after an open circuit, e.g. disconnection of the battery or disconnection of the power supply to the door
? After the door window glass has been removed and installed or replaced
? After adjustment work on the door window glass
? After adjustment work on the convertible top
? After replacement of seals


Initialization is performed on the power window switch of the relevant door.
Requirements for correct initialization:
? Terminal "R" activated
? Doors and windows closed
? Sufficient battery voltage; connect charger if necessary
Initialization comprises:
? Erasure of initialization
? Reinitialization


Erasure of initialization:
? Open door window glass fully
? Actuate power window switch in "Open" position (second switch position) and hold down for between 15 and 20 seconds
This clears initialization of the power window. Anti-trapping protection and one-touch control (toll) function are inactive.
Check whether one-touch control (toll) function is inactive, otherwise repeat procedure.

Reinitialization:
? Close door window completely
? After upper end position is reached, interrupt actuation of power window switch and then hold switch again for approx. 1 second in "Close" position (second switch position)
? Open door window glass fully
? After upper end position is reached, interrupt actuation of power window switch and then hold switch again for approx. 1 second in "Open" position (second switch position)
? Close door window completely
? After upper end position is reached, interrupt actuation of power window switch and then hold switch again for approx. 1 second in "Close" position (second switch position)
This completes initialization.
Note:
Carry out function check (one-touch control function, anti-trapping protection and, if necessary, comfort function).

Note:
The power window can also be initialized in the BMW diagnosis system by means of a diagnosis job.
Appreciate 0
      02-21-2018, 05:45 PM   #6
dopper99
Lieutenant General
dopper99's Avatar
England
2716
Rep
10,390
Posts

Drives: C63 S Coupe
Join Date: Jun 2011
Location: UK

iTrader: (1)

Try this

__________________


Current:
Mercedes AMG C63 S Coupe
Previous:
F80 M3 Competition Pack

Appreciate 0
      02-22-2018, 05:24 AM   #7
machman767
Private First Class
United Kingdom
28
Rep
115
Posts

Drives: 320d Sport auto
Join Date: Nov 2017
Location: Preston

iTrader: (0)

Cheers, all, helpful responses as usual, will give it a go soon.
Mick
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 06:00 PM.




f30post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST