06-03-2021, 03:42 AM | #1 |
Enlisted Member
7
Rep 35
Posts |
NBT HU replaced navigation grayed out
Hi everyone
after some difficulties about retrofitting rearview camera I needed to replace my NBT unit (coding wasn't possible with 3AG) so.... time for a new topic has come Used NBT is now in place and camera is working perfectly , but it appears that I need some FSC code to activate nbt unit because right now Navigation and Update menu are both grayed out I have tool32 + Esys 3.34 + full psdzdata Thanks for the help |
06-03-2021, 12:57 PM | #3 |
Enlisted Member
7
Rep 35
Posts |
thanks, but where can I find this repair pack ? eBay ? or any advice for a website, just found this on google https://www.carsoft.store/...evo-id4-repair-pack ? is it correct ?
|
Appreciate
0
|
06-03-2021, 01:05 PM | #4 | |
Colonel
588
Rep 2,302
Posts |
Quote:
|
|
Appreciate
0
|
06-19-2021, 03:43 AM | #5 |
Enlisted Member
7
Rep 35
Posts |
ok so end of the story (happy end )
I replaced my NBT that was denying the 3AG option in VO - material compatibilty problem Finally I found fsc codes for reactivating module on https://esysx.com for 15€ (repair kit) After replacement of NBT I followed both topics with bought FSC files : Injecting FSC codes https://f30.bimmerpost.com/forums/sh...20&postcount=2 and to activate Navigation on used NBT https://f30.bimmerpost.com/forums/sh...1&postcount=33 Now everything works like a charm special thanks to atzebmw Siki78 |
Post Reply |
Bookmarks |
|
|