Coding Speed Limit Info

rogercykiu · 11-19-2024, 07:22 AM

Quote:

Originally Posted by shawnsheridan

That coding is not needed for F10. F10 just needs VO Coding of 8TH in KOMBI, KAFAS and CIC/NBT. Make sure 8TD is removed from FA if present.

The bimmer8.com product is an Aftermarket SLI Module that enables SLI from Navigation Map Data only, not KAFAS Camera. It's HK Support means only that the Map Data contains SLI Data, not that OEM SLI Camera is supported in HK.

Thank you for reply! However, in my esys of FDL editor, it shows nothing but '-', is there something wrong with my car coding or my esys?

shawnsheridan · 11-19-2024, 09:33 AM

Quote:

Originally Posted by rogercykiu

Thank you for reply! However, in my esys of FDL editor, it shows nothing but '-', is there something wrong with my car coding or my esys?

For FDL Coding, you need a CAFD Mapping Solution like BimmerUtility. PM sent.

Siki78 · 11-19-2024, 10:24 AM

You can just change this line in kafas2 and try it

COUNTRY_SLINPI_MODE
wert=00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00

rogercykiu · 11-19-2024, 06:20 PM

Quote:

Originally Posted by Siki78

You can just change this line in kafas2 and try it

COUNTRY_SLINPI_MODE
wert=00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00

Hi! Thanks for input! Change all to 00? I saw about half are 00 and half are FF.

rogercykiu · 11-20-2024, 05:14 AM

Quote:

Originally Posted by Siki78

You can just change this line in kafas2 and try it

COUNTRY_SLINPI_MODE
wert=00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00

Hi man! You are really genius! Just did what you said and it worked, thanks!

Siki78 · 11-20-2024, 10:42 AM

You are welcome

rogercykiu · 11-21-2024, 10:29 PM

Quote:

Originally Posted by shawnsheridan

For FDL Coding, you need a CAFD Mapping Solution like BimmerUtility. PM sent.

Thanks a lot!

Beachparty · 12-20-2024, 06:04 PM

Good evening everyone,

So, after reading lots of postings and trying to FDL code Speed Limit codong, it seems that something is either not right or missing in my case.
I think it would be easier to simply code 8TH to my VO to make sure everything is as it should be. All I am wondering is if there is anything in my car missing in order to get Speed Lim working
attached is a picture of my car's actual VO / Salapa elements.
My question is... do I only need to insert 8TH in there and code or do I need to remove some other FA from the list in order to have it to work.

Thanks

shawnsheridan · 12-21-2024, 12:38 AM

Quote:

Originally Posted by Beachparty

Good evening everyone,

So, after reading lots of postings and trying to FDL code Speed Limit codong, it seems that something is either not right or missing in my case.
I think it would be easier to simply code 8TH to my VO to make sure everything is as it should be. All I am wondering is if there is anything in my car missing in order to get Speed Lim working
attached is a picture of my car's actual VO / Salapa elements.
My question is... do I only need to insert 8TH in there and code or do I need to remove some other FA from the list in order to have it to work.

Thanks

You need to remove 8TD when present (it isn't), add 8TH, and VO Code car. You also need SLI FSC Code.

1989964 · 02-13-2025, 06:39 AM

Hi can anyone say a supply for the G series 11f fsc p/n 66502456865
Baum bmw shop cant supply neither can my local dealership, I would like to pay around 50 euros, which was the official BMW price,
thanks

shawnsheridan · 02-13-2025, 11:26 AM

Quote:

Originally Posted by 1989964

Hi can anyone say a supply for the G series 11f fsc p/n 66502456865
Baum bmw shop cant supply neither can my local dealership, I would like to pay around 50 euros, which was the official BMW price,
thanks

PM sent.

11-19-2024, 10:24 AM	#245
Siki78 Captain 200 Rep 680 Posts Drives: F30,G30 Join Date: Nov 2017 Location: Zürich iTrader: (0)	You can just change this line in kafas2 and try it COUNTRY_SLINPI_MODE wert=00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00
	Appreciate 0 Quote

11-20-2024, 10:42 AM	#248
Siki78 Captain 200 Rep 680 Posts Drives: F30,G30 Join Date: Nov 2017 Location: Zürich iTrader: (0)	You are welcome
	Appreciate 0 Quote

12-20-2024, 06:04 PM	#250
Beachparty Private 8 Rep 70 Posts Drives: F30 335i Join Date: Jun 2019 Location: Montreal iTrader: (0)	8TH Good evening everyone, So, after reading lots of postings and trying to FDL code Speed Limit codong, it seems that something is either not right or missing in my case. I think it would be easier to simply code 8TH to my VO to make sure everything is as it should be. All I am wondering is if there is anything in my car missing in order to get Speed Lim working attached is a picture of my car's actual VO / Salapa elements. My question is... do I only need to insert 8TH in there and code or do I need to remove some other FA from the list in order to have it to work. Thanks Attached Images
	Appreciate 0 Quote

02-13-2025, 06:39 AM	#252
1989964 Private 7 Rep 62 Posts Drives: F11 535d Join Date: May 2013 Location: uk iTrader: (0)	after the fsc Hi can anyone say a supply for the G series 11f fsc p/n 66502456865 Baum bmw shop cant supply neither can my local dealership, I would like to pay around 50 euros, which was the official BMW price, thanks
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search