[Awdbrandon]

Originally Posted by MYF30ROCKS

Update mostly final

Most of the wiring is modified and routed correctly! Following working in order with out any issues

AM Radio
FM Radio(most channels HD quality )
Music collection
USB Armrest
USB Glovebox
Both mics
Apple CarPlay (most Apps)
Video in motion
Split or full screen display
Navigation
Service history
Sports menu
Cameras, rear, front and 360
Parking Distance Control
I-drive Touch etc

I am happy!

Sorry to bring up an old post.

I have a 13' F30 and I'm looking to go from CIC High to NBT Evo ID6.

Can you point me in the direction of all the physical parts required?

You can contact me here or @awdbrandon on Instagram. I'd love to chat if you could assist!

[rlesko]

Originally Posted by MYF30ROCKS

Update mostly final

Most of the wiring is modified and routed correctly! Following working in order with out any issues

AM Radio
FM Radio(most channels HD quality )
Music collection
USB Armrest
USB Glovebox
Both mics
Apple CarPlay (most Apps)
Video in motion
Split or full screen display
Navigation
Service history
Sports menu
Cameras, rear, front and 360
Parking Distance Control
I-drive Touch etc

I am happy!

Do you have the pinout that you used for glovebox USB and mic #2? I was confused how Mic #2 is wired to the CIC version of the car, I checked continuity at the mic and each pin in the quadlock harness and there were not hits - which made me think that it may run to the combox?

[rlesko]

Originally Posted by Awdbrandon

Sorry to bring up an old post.

I have a 13' F30 and I'm looking to go from CIC High to NBT Evo ID6.

Can you point me in the direction of all the physical parts required?

You can contact me here or @awdbrandon on Instagram. I'd love to chat if you could assist!

Checkout this video

[Awdbrandon]

Originally Posted by rlesko

Checkout this video

Thanks for sending me this video!

I believe I've seen this before, it appears he's completely DIY'ing the harness. I'm curious if there is a harness that is purchasable anywhere.

[rlesko]

Originally Posted by Awdbrandon

Thanks for sending me this video!

I believe I've seen this before, it appears he's completely DIY'ing the harness. I'm curious if there is a harness that is purchasable anywhere.

On eBay there are some sellers you can work with who can help with this, as well as FSC Codes for retro NBT Evo HU. One of the common pin swappings necessary is for the reverse camera. I think Mic#1 can also vary...best bet would be to check ISTA+ For wiring diagrams.

[MYF30ROCKS]

Originally Posted by rlesko

Do you have the pinout that you used for glovebox USB and mic #2? I was confused how Mic #2 is wired to the CIC version of the car, I checked continuity at the mic and each pin in the quadlock harness and there were not hits - which made me think that it may run to the combox?

If I remember correctly
Mic2 was 18&19
Glovebox usb is 180deg rotation

[rlesko]

Originally Posted by MYF30ROCKS

If I remember correctly
Mic2 was 18&19
Glovebox usb is 180deg rotation

Let me ask in a better way - if your car came originally equipped with microphone 2 on CIC, did you change the pins at the quadlock harness or just run new microphone wires?

Also, I also made a mistake, I meant to ask about armrest /center console USB, not glove box - sorry!

[MYF30ROCKS]

Originally Posted by rlesko

Let me ask in a better way - if your car came originally equipped with microphone 2 on CIC, did you change the pins at the quadlock harness or just run new microphone wires?

Also, I also made a mistake, I meant to ask about armrest /center console USB, not glove box - sorry!

Quad lock to microphone 2 ran new wires.
For armrest usb used the same cable, removed the locking feature and installed back in the radio by rotating 180deg.

[rlesko]

Originally Posted by MYF30ROCKS

Quad lock to microphone 2 ran new wires.
For armrest usb used the same cable, removed the locking feature and installed back in the radio by rotating 180deg.

As shown in this video?

I may buy new USB cable, don't like cutting stuff!

[MYF30ROCKS]

Agree that’s best way

FYI- It’s still tight enough not to get loose with car vibration. I added Tessa tape to make it don’t come loose.

[fe7565]

Originally Posted by rlesko

As shown in this video?



I may buy new USB cable, don't like cutting stuff!

I had to cut mine, never came loose in 3 years.

You can buy USB cables on Aliexpress for about $10-15, but you may need to cut that plug too to fit.

Here is the quadlock for NBT and CIC-High