[shawnsheridan]

Originally Posted by per_

Hi Shawn!
I’m having an issue with my navigation. The original ECU died and i replaced it with a donor one, I managed to get bluetooth working, but I can’t seem to get navigation to work, when i turn on my car, I can enter navigation, but after 30-40 seconds it becomes grayed out.
Any help is appriciated.

You need to wipe Donor FSC Codes and load full set of original OEM ones.

Your Receive PM function is disabled. PM me when working.

[per_]

Ok, will do.

[per_]

1

[per_]

2

[per_]

3

[per_]

4

[nghtvsion]

Hi Shawn! I'm hoping to benefit from a lesson as well...

I just moved my 2013 E70 from NA to eastern europe, and of course the Nav doesn't work. From reading the previous four pages, it seems that have two options - either I'll pay a dealer exorbitant amount, or find an FSC code and Nav update from a random internet seller. First question, do I understand that much correctly?

Second, assuming the above is accurate, can anyone weigh in on where to purchase / how to install the FSC and Nav update? I'm terribly undereducated I'm afraid.

Thanks for taking the time, and thanks in advance for any help!!

[shawnsheridan]

Originally Posted by nghtvsion

Hi Shawn! I'm hoping to benefit from a lesson as well...

I just moved my 2013 E70 from NA to eastern europe, and of course the Nav doesn't work. From reading the previous four pages, it seems that have two options - either I'll pay a dealer exorbitant amount, or find an FSC code and Nav update from a random internet seller. First question, do I understand that much correctly?

Second, assuming the above is accurate, can anyone weigh in on where to purchase / how to install the FSC and Nav update? I'm terribly undereducated I'm afraid.

Thanks for taking the time, and thanks in advance for any help!!

Your Receive PM function is disabled. PM me when working.

[Delliwell]

Great info!

[ftank83]

Hi Shawn

I am hoping you can point me in the right direction. I have a 2017 330i which I previously had activated carplay via usb and installed some RTTI code as well via usb. The RTTI code caused an issue I think and my local BMW dealer updated the software and did a full reset. I have ID6

Post that update my navigation is now forever in loading but I think this might be the case due to there being non oem fsc codes in play.

Is there a way I can get rid of these codes and essentially put the whole thing back into factory state to get the nav working again.

Any help appreciated, it is all a little confusing. I have an ENET cable but not sure what else I need to do.

Appreciate any guidance or assistance you can give

[shawnsheridan]

Originally Posted by ftank83

Hi Shawn

I am hoping you can point me in the right direction. I have a 2017 330i which I previously had activated carplay via usb and installed some RTTI code as well via usb. The RTTI code caused an issue I think and my local BMW dealer updated the software and did a full reset. I have ID6

Post that update my navigation is now forever in loading but I think this might be the case due to there being non oem fsc codes in play.

Is there a way I can get rid of these codes and essentially put the whole thing back into factory state to get the nav working again.

Any help appreciated, it is all a little confusing. I have an ENET cable but not sure what else I need to do.

Appreciate any guidance or assistance you can give

PM sent.

[conan-69]

Hello everyone, I'm new to the forum, I live in Italy and I'm looking for information on how to upgrade my car.
I was able to successfully implement the HBA, replacing the light switch on the steering wheel and doing the appropriate coding.
Now I would like to try activating SLI, but it is not clear to me if I will need an FSC or not.
At the moment my account is new and therefore I cannot receive PM.
Thanks for the attention.

[shawnsheridan]

Originally Posted by conan-69

Hello everyone, I'm new to the forum, I live in Italy and I'm looking for information on how to upgrade my car.
I was able to successfully implement the HBA, replacing the light switch on the steering wheel and doing the appropriate coding.
Now I would like to try activating SLI, but it is not clear to me if I will need an FSC or not.
At the moment my account is new and therefore I cannot receive PM.
Thanks for the attention.

SLI required FSC Enabling Code.

Your Receive PM function is disabled. PM me when working.

[conan-69]

Originally Posted by shawnsheridan

SLI required FSC Enabling Code.

Your Receive PM function is disabled. PM me when working.

Thanks for you reply Shawn

[conan-69]

Originally Posted by conan-69

Thanks for you reply Shawn

Hi Shawn,
I tried to send you a PM

[shawnsheridan]

Originally Posted by conan-69

Hi Shawn,
I tried to send you a PM

PM sent.

[nghtvsion]

So turns out I not only don’t have PM function yet (without four post replies) but I had emails from the site turned off so this whole two months I thought the forum dropped off 😂

PM function should be good in an hour. Thanks fellas!

[nghtvsion]

2

[nghtvsion]

3

[nghtvsion]

4

[nghtvsion]

PM sent

[shawnsheridan]

Originally Posted by nghtvsion

So turns out I not only don’t have PM function yet (without four post replies) but I had emails from the site turned off so this whole two months I thought the forum dropped off 😂

PM function should be good in an hour. Thanks fellas!

PM sent.