F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > F30 DIYs and Coding Discussions > BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.
ARMA SPEED
Post Reply
 
Thread Tools Search this Thread
      08-25-2013, 10:44 PM   #4445
steve@codemybimmer
BimmerPost Supporting Vendor
steve@codemybimmer's Avatar
Hong Kong
483
Rep
1,766
Posts


Drives: 2016 M235i xDrive Cabriolet
Join Date: Apr 2010
Location: Hong Kong & Canada

iTrader: (2)

Garage List
Just noticed that there's now psdzdata 50.3 and Esys 3.23.4 - do I need a new token to be able to use the newer version of Esys or will the current one still be good for that?
Appreciate 0
      08-25-2013, 10:47 PM   #4446
shawnsheridan
General
shawnsheridan's Avatar
United_States
4576
Rep
24,535
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Aritaurus View Post
Just noticed that there's now psdzdata 50.3 and Esys 3.23.4 - do I need a new token to be able to use the newer version of Esys or will the current one still be good for that?
Technically no, but you would need a new Patch, and since they come together, you would get a Token with a new Validity Period.

However, if you already have 3.22.5, there is no reason at all to update to 3.23.4. You will gain nothing.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      08-26-2013, 12:06 AM   #4447
ioschi2003
Enlisted Member
0
Rep
31
Posts

Drives: BMW X3 3.0
Join Date: Aug 2013
Location: Rome

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
The PSdZData version used is not a matter of being better, rather it is solely a matter of necessity. Either you have a car that was programed with ISTA/P 2.50.3 and you NEED 50.3 PSdZData to read the ECU's and Code them, or you don't, in which case you DO NOT NEED it.

Using newer PSdZData on a car programmed with older ISTA/P version buys you nothing. The car will still only be capable of the features programmed into it from the older ISTA/P version, unless you are going to flash the ECU's with the new 50.3 firmware.
OK Thanks,
I'll check with the new FW after BMW update with 6NR option.
If necessary I'll ask to you for new psdzdata.
bye
Appreciate 0
      08-26-2013, 02:49 AM   #4448
avgor123
Private First Class
avgor123's Avatar
Russian Federation
1
Rep
121
Posts

Drives: F30 320D Sport
Join Date: Sep 2012
Location: St.Petersburg

iTrader: (0)

Garage List
Hi all!
Does anybody know is it possible to change info in serviсe logbook in the fob with E-SYS?

Last edited by avgor123; 08-26-2013 at 04:46 AM..
Appreciate 0
      08-26-2013, 05:48 AM   #4449
shawnsheridan
General
shawnsheridan's Avatar
United_States
4576
Rep
24,535
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by samaks View Post
Hello Shawn,

May I have the links to the software also? Just ordered the cable.
...
Quote:
Originally Posted by shawnsheridan View Post
You will have to post an email, or wait until you can receive PM's.
...
.
Quote:
Originally Posted by carlos BMW View Post
Dear Shawn, could I please ask for the latest e-sys, data files and instructions as a PM

Thank you!
Quote:
Originally Posted by shawnsheridan View Post
You have to post an email or wait until you can receive PM's.
Time's up. PM's sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      08-26-2013, 11:23 AM   #4450
iaincb
Enlisted Member
9
Rep
34
Posts

Drives: F31 335d xDrive
Join Date: Aug 2013
Location: South West

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
Time's up. PM's sent.
Shawn,

Any chance of one more PM with links to the software?

Appreciate 0
      08-26-2013, 11:36 AM   #4451
shawnsheridan
General
shawnsheridan's Avatar
United_States
4576
Rep
24,535
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by iaincb View Post
Shawn,

Any chance of one more PM with links to the software?

PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      08-26-2013, 01:17 PM   #4452
etamitlu
New Member
0
Rep
14
Posts

Drives: bmw
Join Date: Mar 2013
Location: lowernewtown

iTrader: (0)

Hi, I need help. Such an error in reading FEM-BODY F21, Level F020-13-03-503, have psdzdata 49.4
Attached Images
 

Last edited by etamitlu; 08-27-2013 at 02:25 AM..
Appreciate 0
      08-26-2013, 01:26 PM   #4453
Shinyo
New Member
4
Rep
14
Posts

Drives: f30
Join Date: Jul 2013
Location: MA

iTrader: (0)

Shawn can I get one of your PMs with the links? Thanks a lot!
Appreciate 0
      08-26-2013, 03:27 PM   #4454
Bvt13
Private
United_States
9
Rep
62
Posts

Drives: 2016 AW M4
Join Date: Aug 2013
Location: Washington D.C.

iTrader: (5)

Garage List
2016 M4  [0.00]
Shawn,

Can I get a PM with all the necessary links?

Thanks!
Appreciate 0
      08-26-2013, 03:36 PM   #4455
shawnsheridan
General
shawnsheridan's Avatar
United_States
4576
Rep
24,535
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by etamitlu View Post
Hi, I need help. Such an error in reading FEM-BODY F21, Level F020-13-03-503, have psdzdata 49.4
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      08-26-2013, 03:38 PM   #4456
shawnsheridan
General
shawnsheridan's Avatar
United_States
4576
Rep
24,535
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Shinyo View Post
Shawn can I get one of your PMs with the links? Thanks a lot!
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      08-26-2013, 03:39 PM   #4457
shawnsheridan
General
shawnsheridan's Avatar
United_States
4576
Rep
24,535
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Bvt13 View Post
Shawn,

Can I get a PM with all the necessary links?

Thanks!
You have to post an email or wait until you can receive PM's.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      08-26-2013, 04:02 PM   #4458
schwarzrb
New Member
0
Rep
9
Posts

Drives: 2014 328d
Join Date: Jun 2013
Location: Bryn Mawr, PA

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
1) Read this Post:

http://www.f30post.com/forums/showpo...postcount=4387

2) No. It saves only a copy of your original FA (VO).

3) VO Code each ECU or your entire SVT with original factory FA (VO). DO NOT use the "CODE DEFAULTS" button in E-Sys, or you will regret it.
Shawn, for 3), what are the steps to do this. Is there a procedure somewhere? Thanks!
Appreciate 0
      08-26-2013, 04:05 PM   #4459
shawnsheridan
General
shawnsheridan's Avatar
United_States
4576
Rep
24,535
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by schwarzrb View Post
Shawn, for 3), what are the steps to do this. Is there a procedure somewhere? Thanks!
VO Code:
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE.

This will encode an entire ECU with all the parameters needed to support every option in your Vehicle Order.

You can VO Code the entire car one module at a time, or you could use Ctrl-Right-Click above and select multiple ECU's to Encode, or you could even Right-Click at the Top of your SVT where your VIN is showing, and encode the entire SVT (all ECU's). If you try and encode DME Module, or the entire SVT (which includes the DME module), the car can not be running during the encoding process.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      08-26-2013, 10:32 PM   #4460
valley_nomad
Private First Class
20
Rep
109
Posts

Drives: 2013 F30 328i
Join Date: May 2012
Location: Silicon Valley

iTrader: (0)

Does TCM_LOGIC_R_OFF_DOOR = aktiv disable FH_TUERAUF_STOP_MAUT = nicht_aktiv?

i.e. If the car is coded to turn off the radio and navigation when the door is open, will it also stop the window up/down regardless the coding?
Appreciate 0
      08-27-2013, 05:53 AM   #4461
Kapitein Iglo
Enlisted Member
7
Rep
37
Posts

Drives: F31
Join Date: Dec 2012
Location: Belgium

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
VO Code:
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE.

This will encode an entire ECU with all the parameters needed to support every option in your Vehicle Order.

You can VO Code the entire car one module at a time, or you could use Ctrl-Right-Click above and select multiple ECU's to Encode, or you could even Right-Click at the Top of your SVT where your VIN is showing, and encode the entire SVT (all ECU's). If you try and encode DME Module, or the entire SVT (which includes the DME module), the car can not be running during the encoding process.
Is there a possibility to check what option effects what specific module?

Eg: 6NK -> only HU_NBT, etc
Appreciate 0
      08-27-2013, 06:29 AM   #4462
shawnsheridan
General
shawnsheridan's Avatar
United_States
4576
Rep
24,535
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Kapitein Iglo View Post
Is there a possibility to check what option effects what specific module?

Eg: 6NK -> only HU_NBT, etc
No. You just have to make an Educated Guess.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      08-27-2013, 09:45 AM   #4463
Yobyot
Captain
Yobyot's Avatar
368
Rep
973
Posts

Drives: MY19 X3 M40i
Join Date: May 2005
Location: Boston

iTrader: (0)

It's time up re-code my favorite options because the dealer has updated the car. (BTW, whatever level they used really improved ASS. Some -- not all -- stops are imperceptable. And re-starts are amazingly smooth.)

Could someone review for me the best way to update an older working Windows system (PSdZData 48.3 with ESys 3.18.4) to 50.3 and 3.23.4?

I searched this thread, but it's so large I couldn't find the posts that I think describe a process of simply re-installing ESys (and getting a new token, of course) and overlaying the entire psdzdata folder.

Would that still work?
__________________
MY18 X3 30i:
Produced: 2018-03-15; Delivered: 2018-03-29
MY19 X3 M40i:
Produced: 2018-08-15; Delivered 2018-08-22
Appreciate 0
      08-27-2013, 11:09 AM   #4464
etamitlu
New Member
0
Rep
14
Posts

Drives: bmw
Join Date: Mar 2013
Location: lowernewtown

iTrader: (0)

Shawnsheridan, thanks for your help and patience.
Appreciate 0
      08-27-2013, 11:40 AM   #4465
shawnsheridan
General
shawnsheridan's Avatar
United_States
4576
Rep
24,535
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Yobyot View Post
It's time up re-code my favorite options because the dealer has updated the car. (BTW, whatever level they used really improved ASS. Some -- not all -- stops are imperceptable. And re-starts are amazingly smooth.)

Could someone review for me the best way to update an older working Windows system (PSdZData 48.3 with ESys 3.18.4) to 50.3 and 3.23.4?

I searched this thread, but it's so large I couldn't find the posts that I think describe a process of simply re-installing ESys (and getting a new token, of course) and overlaying the entire psdzdata folder.

Would that still work?
Start over. Uninstall E-Sys 3.18.4 though the Control Panel, and delete the psdzdata folder (e.g. C:\ESysData\psdzdata). The following the installation instructions as if it was the first time.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      08-27-2013, 11:44 AM   #4466
shawnsheridan
General
shawnsheridan's Avatar
United_States
4576
Rep
24,535
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Bvt13 View Post
Shawn,

Can I get a PM with all the necessary links?

Thanks!
Quote:
Originally Posted by shawnsheridan View Post
You have to post an email or wait until you can receive PM's.
Time's up. PM's sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
Post Reply

Bookmarks

Tags
3 series coding, 3 series f30, 3 series f30 coding, 3 series f30 forum, 3 series forum, 3-series forum, 5 series f10 coding, ass, ass disable, auto start stop, auto start stop disable, bmw 3 series coding, bmw 3 series f30, bmw 3 series forum, bmw 3-series f30, bmw 3-series forum, bmw 5 series coding, bmw auto start stop disable, bmw auto start stop disabling, bmw coding, bmw coding directions, bmw coding diy, bmw coding instructions, bmw diy, bmw diy forum, bmw f10 coding, bmw f30, bmw f30 3 series, bmw f30 3-series, bmw f30 coding, bmw f30 forum, coding 3 series, coding f30, coding f30 3 series, disable ass, disable auto start stop, disable bmw auto start stop, disabling auto start stop, disabling bmw auto start stop, f10 5 series coding, f10 coding, f30 3 series, f30 3 series coding, f30 3 series forum, f30 3-series, f30 3-series forum, f30 coding, f30 forum, f30 forums

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:25 PM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST