[aussie_335]

Hi everyone. Excuse my ignorance. I have the Bimmercode app and have done some coding to my 2017 F32 440i.
I have done the following.
Video in motion
Disclaimer on start up delete
Stop/start disable
Auto fold mirrors on close unfold on open
I have been reading and notice other people have things like
Turn indicator in HUD,
ID6 Lite,
Reading texts while driving
Could somebody please advise me where in the app you can do this. If it is in expert mode then where.
Why isn't there some documentation on what can and cant be changed and where you change it. Any help would be greatly appreciated.
cheers

[sj03]

Hi aussie_335, I've recently done some similar coding to my 440i using the Bimmercode app. Attached is a Coding Guide that I got from another post on the Forum (can't remember which one though). While I'm not sure that all the Coding is applicable to our vehicles, there should be enough to get you going.

One of the handy Codes I found changed the defualt distance for the Stop&Go Cruise Control. There are also Codes in the list that seem to allow ConnectedApps in motion but I'm still testing those.

I hope it helps.

[aussie_335]

Thanks heaps

cheers