[Metanoia Prime]

Originally Posted by GB///M

Thanks! I think i kinda like the design of these wheels (408m) better than my summers (403m)

Not me. 403m wheels are some of my favorites. I might be biased, though.

But really, my car would feel incomplete without those wheels. When I was looking around for the right car, I had seen one with the 403m wheels first, and all the rest looked too bland for me in comparison.

[Kailec]

Did vinyl wrap of my two dash pieces. Haven't done console or handles yet because didn't buy a big enough piece. Not 100% happy with the wrap itself but might suffice until I either get a different wrap or just bite the bullet and get a real cf piece instead.

[MSCD]

Originally Posted by Kailec

Did vinyl wrap of my two dash pieces. Haven't done console or handles yet because didn't buy a big enough piece. Not 100% happy with the wrap itself but might suffice until I either get a different wrap or just bite the bullet and get a real cf piece instead.

Nice - I am in the market for the M Performance interior. Saw a price of $755 inc shipping yesterday..... may well pull the trigger.

[BEM-S4]

Originally Posted by MSCD

Nice - I am in the market for the M Performance interior. Saw a price of $755 inc shipping yesterday..... may well pull the trigger.

Check with Brian at Sun before you do anything. I always waste my time and shop around anyway but he's always the cheapest.

[Kailec]

Originally Posted by BEM-S4

Check with Brian at Sun before you do anything. I always waste my time and shop around anyway but he's always the cheapest.

Who's 'Brian at Sun'?

[Kailec]

Originally Posted by MSCD

Nice - I am in the market for the M Performance interior. Saw a price of $755 inc shipping yesterday..... may well pull the trigger.

Do you mean the dry carbon one for the F30?

[BEM-S4]

Originally Posted by Kailec

Who's 'Brian at Sun'?

Oh you're in Canada so maybe not for you, no idea about shipping. Brian is the parts manager at Sun BMW in Mechanicsburg PA. Google is our friend, kiddos.

[MSCD]

Originally Posted by BEM-S4

Oh you're in Canada so maybe not for you, no idea about shipping. Brian is the parts manager at Sun BMW in Mechanicsburg PA. Google is our friend, kiddos.

Thank you Sir, I'll drop him a line! Much appreciated.

[MSCD]

Originally Posted by Kailec

Do you mean the dry carbon one for the F30?

That's correct - I have an F31. I already have the shifter/ surround and armrest with the dry CF.

[jgoens]

Originally Posted by Kailec

Did vinyl wrap of my two dash pieces. Haven't done console or handles yet because didn't buy a big enough piece. Not 100% happy with the wrap itself but might suffice until I either get a different wrap or just bite the bullet and get a real cf piece instead.

You know you can tuck that dashcam wire into light console right above the rear mirror and not have the wire going across your windshield at all.

[BEM-S4]

Originally Posted by MSCD

Thank you Sir, I'll drop him a line! Much appreciated.

Great place and super stand up guys all around. I buy my cars there. Long story short my MPE install turned into a nightmare bc the kit was missing pieces - not their fault - and I ended up getting one for free. I was expecting MAYBE 20% off for the hassle. They def go above and beyond for their customers.

[MSCD]

Originally Posted by BEM-S4

Great place and super stand up guys all around. I buy my cars there. Long story short my MPE install turned into a nightmare bc the kit was missing pieces - not their fault - and I ended up getting one for free. I was expecting MAYBE 20% off for the hassle. They def go above and beyond for their customers.

Good to know. That's quite the drive so they must look after you! I'll call in the morning. Cheers!

[Kailec]

Originally Posted by BEM-S4

Great place and super stand up guys all around. I buy my cars there. Long story short my MPE install turned into a nightmare bc the kit was missing pieces - not their fault - and I ended up getting one for free. I was expecting MAYBE 20% off for the hassle. They def go above and beyond for their customers.

I don't suppose they ship to Canada? Be sweet if they did and could give me a good price on the cf trim.

[Kailec]

Originally Posted by jgoens

You know you can tuck that dashcam wire into light console right above the rear mirror and not have the wire going across your windshield at all.

It got loose when I was cleaning it recently, too lazy to put it back properly. :P

[spuntyb]

Originally Posted by GB///M

Got my winter setup on. This was from my previous f10 m5.

Love those wheels

[Dinan_Rated]

Originally Posted by MSCD

Nice - I am in the market for the M Performance interior. Saw a price of $755 inc shipping yesterday..... may well pull the trigger.

Good price, did the same as you, wrapped it in 4d carbon fiber vinyl wrap but hated the blurred look at angles. It last a day and ordered the complete interior m performance dry carbon and alcantara trim. Never looked back, get tons of compliments on the cabin from guests. I believe when this kit came out it was 1999.99 if I remember correctly. I’m sure someone will correct meyou’ll be much happier with that oem feel.pull the trigger

[Dinan_Rated]

Originally Posted by IssaF32

On my f32 I got downpipes and plastic dipped my wheels

Any of the wheels?

[Kailec]

Originally Posted by Dinan_Rated

Good price, did the same as you, wrapped it in 4d carbon fiber vinyl wrap but hated the blurred look at angles. It last a day and ordered the complete interior m performance dry carbon and alcantara trim. Never looked back, get tons of compliments on the cabin from guests. I believe when this kit came out it was 1999.99 if I remember correctly. I’m sure someone will correct meyou’ll be much happier with that oem feel.pull the trigger

I wish I didn't have expensive tastes and liked the dry carbon look. $755 is a much more reasonable price for 7 pieces than the $2000 needed for the glossy carbon.

[Dinan_Rated]

Originally Posted by Kailec

I wish I didn't have expensive tastes and liked the dry carbon look. $755 is a much more reasonable price for 7 pieces than the $2000 needed for the glossy carbon.

Agreed!

[MSCD]

Originally Posted by BEM-S4

Check with Brian at Sun before you do anything. I always waste my time and shop around anyway but he's always the cheapest.

You were right.... in stock and lowest! Going to look up install videos!

[BEM-S4]

Originally Posted by MSCD

You were right.... in stock and lowest! Going to look up install videos!

It's all very easy - not sure how far you are from Philly but happy to help if you need. Could knock it out in 30 mins or less easy.

Only thing to be careful of - center piece when you remove put a rag or something in the cavity below before you unscrew controls if you drop one down there you'll never get it back.

[Kailec]

Originally Posted by MSCD

You were right.... in stock and lowest! Going to look up install videos!

How much if you don't mind my asking?