[SH3THIC]

Hey, I was wondering if anyone of yall would know if these camber plates would work with my car(2016 340i). I have the 5 bolt pattern where my top hat is and this set which came off my buddies 335 has only 3 bolts. Would this still work or would I be able to use some additional hardware and make it work?

[blumagic]

It works, all millway camber plates are 5 bolt so I asked the opposite question when buying those (I have a 3 bolt car W/ 5 bolt camber plates). The 3 bolts are in the same position on both

Here was the explanation, maybe a little more nvh going from 5 to 3.

I have a small feeling that the 3-bolt cars have a little more noise from the topmounts. There is of course a reason that BMW upgraded this in 3 steps to finally use 5x M8. The good thing is that they never changed the position of the original 3 holes. They just added 2 extra holes. This makes it possible to add 2 extra holes in the older cars.

Let me know if you have any more questions.



Best Regards
Samuel Lindkvist
Millway Motorsport

You might just want to check the bolt size that fits into the camber plate. I know those changed throughout the years. Idk if the 5 bolt has smaller diameter mounting holes