11-04-2019, 04:05 AM | #1 |
Brigadier General
1890
Rep 3,876
Posts |
Strongest safe cleaning agent for clearcoat!?
I have something (unknown origin and type) literally brushed on a small area on my roof. It looks like a dried shampoo or sealant or...
Parallel glossy lines like from a hand applicator, running for about 20cm. I have no explanation about where it came form, I discovered it during waxing, but it was not the wax I was using, as I initially suspected. Either way - I tried Swissvax cleaner, I tried 10% IPA, I tried 100% IPA, I tried 100% denaturated alcohol..... nothing made any difference. Polishing is not an option. Any suggestions about what else can be tried that will not damage the clearcoat?
__________________
"Large increases in cost with questionable increases in performance can be tolerated only in cars and women."
|
11-04-2019, 12:21 PM | #2 |
E4 Mafia
323
Rep 412
Posts
Drives: E30, E36/5, E46, F22, F30
Join Date: Apr 2018
Location: MD
iTrader: (0)
Garage List 1990 BMW 325i [0.00]
1998 BMW 318ti [0.00] 2003 BMW 325i [0.00] 2015 BMW 335i [0.00] 2015 BMW M235i [0.00] |
clay bar?
__________________
Squad - '90 E30 325i MT (225k) | '98 E36/5 318ti MT (153k) | '03 E46 325i MT (152k)| '15 F22 M235i MT (60k) | '15 F30 335i MT (80k)
KIA - '91 E30 325i AT (146k) | '02 E46 325i MT (212k) Bring back the purple M stripe |
Appreciate
0
|
11-04-2019, 12:40 PM | #3 |
Brigadier General
1890
Rep 3,876
Posts |
Won't help. Not noticeable when touched. Look like wet/oily residuals. But flat to the touch. Only chemically removable... if at all.
__________________
"Large increases in cost with questionable increases in performance can be tolerated only in cars and women."
|
Appreciate
0
|
11-04-2019, 06:03 PM | #4 | |
Captain
275
Rep 799
Posts |
Quote:
Stoners Tarminator Automotive GooGone WD40 Whatever you use, afterwards just wash and reapply your wax or sealant to that area Any pic of it by chance?
__________________
|
|
Appreciate
0
|
11-05-2019, 02:20 AM | #5 |
Brigadier General
1890
Rep 3,876
Posts |
Not a great illustration, but still visible. Talking about those wet-look, brushed parallel marks...:
They are a bit more visible in reality than on the photo, but at the same time not that obvious either to risk making it worse. I am just puzzled what it could be and WHY it cannot be removed by normal methods...
__________________
"Large increases in cost with questionable increases in performance can be tolerated only in cars and women."
|
Appreciate
0
|
11-06-2019, 05:51 PM | #6 |
Banned
1770
Rep 6,696
Posts
Drives: F30 340i
Join Date: Jan 2009
Location: San Diego,CA
|
Maybe an iron remover type product?
|
Appreciate
0
|
11-06-2019, 07:19 PM | #7 |
First Lieutenant
170
Rep 358
Posts |
Are you the first and only owner?
If you can't feel anything when you brush your fingers over it, and none of the cleaners you have tried have done anything thennnn The last solution is to do some paint correct and cut/polish it which you said wasn't an option.
__________________
|
Appreciate
0
|
11-07-2019, 12:49 AM | #8 |
Brigadier General
1890
Rep 3,876
Posts |
First and only. And you'd think I'd have noticed it earlier, since it does not seem to have occurred during the waxing itself (I experimented afterwards and left wax for significantly longer on another (hidden) spot and was easily able to wipe it off without any residual gloss.
Cut and polish is not an option on a matte paint! Gloss is what you don't want I was thinking about acetone (commonly used to remove paint (spray or other) from the clear-coat), but it sounds risky. It is not easily visible now, wouldn't want to make it worse...
__________________
"Large increases in cost with questionable increases in performance can be tolerated only in cars and women."
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|