[gizmo1908]

Hello

I retrofitted a nbt evo yesterday in my 2012 f30
(Coded by steve@codemybimmer)

Everything works perfect except my pdc. In my old champ2 it had the whole car on the left and it would switch view from front to back while changing gear.

Since i have the nbt evo i noticed that the car stayes fixed in the middle. The image doesnt shift from front to rear while changing gears.


Is that a coding issue or is this the normal view for a nbt evo?

[gizmo1908]

I mean right side of the display...🤦🏻*♂️

[NVETHIS]

I retrofitted BimmerTech NBT Evo last week and I have PDC as well. Mine is like your Right picture posted with the Car in the middle of the screen static. I don't think mine switched from front to back before I had the retrofit in.

-NVE

[steve@codemybimmer]

They actually stopped displaying it that way after NBT since you would see the front and the rear PDC all in the same view.

What you see there is completely normal

[gizmo1908]

Originally Posted by steve@codemybimmer

They actually stopped displaying it that way after NBT since you would see the front and the rear PDC all in the same view.

What you see there is completely normal

That's to bad. I liked it the way it was actually. but hey i got a evo

Thanks

[mitesh33]

I’ve retrofitted the NBT EVO ID6 into my 2012 F30 Auto

99% of it functions correctly and I believe this is down to the FDL coding.

When I reverse the PDC is displayed how should on the screen. However when I select Drive(D) again it won’t switch the display back. Anyone know where the coding function is for this?

I only have OEM factory rear sensors by the way.

Cheers

[smrtypants44]

Originally Posted by mitesh33

I’ve retrofitted the NBT EVO ID6 into my 2012 F30 Auto

99% of it functions correctly and I believe this is down to the FDL coding.

When I reverse the PDC is displayed how should on the screen. However when I select Drive(D) again it won’t switch the display back. Anyone know where the coding function is for this?

I only have OEM factory rear sensors by the way.

Cheers

I don't know if it makes a difference but mine will stay in camera mode until I drive forward a bit (I think it might be speed related cause if i put it in reverse then stop and put it in park it the camera will stay on-while when I put it in drive it usually only stays on for a couple seconds). I'm sure there's long coding somewhere that tells it how long to wait to switch.

[mitesh33]

Originally Posted by smrtypants44

I don't know if it makes a difference but mine will stay in camera mode until I drive forward a bit (I think it might be speed related cause if i put it in reverse then stop and put it in park it the camera will stay on-while when I put it in drive it usually only stays on for a couple seconds). I'm sure there's long coding somewhere that tells it how long to wait to switch.

Hi,

You’re right. I’ve just tried it. Soon as the car moves a little forwards it switches back. I might look into the coding how long as really you want it be instant soon as you put in Drive.

Thanks for confirming