[mihaimetal]

Wow, thanks man! It works!
I just changed it to

kein_nbt

with advanced mode in Bimmercode. There's no way it was that simple...

[Siki78]

Check this all settings and see if help you
;DKMOBI
NAVICOLOR_TABLE=farbwelt_id5

;HU_NBT2
KOMBI_CIC=kombi_high
KOMBI_AUFLOESUNG=aktiv
MFID_KOMBI_VARIANT=nicht_aktiv
HUD_AUFLOESUNG=aufloesung_1
HUD_KOMPRIMIERUNG_ART=rle_1
NAVI_HUD_AVAILABLE=aktiv

[mihaimetal]

If I wasn't clear it worked with kein_nbt to have the navigation directions shown.

But sometimes the language switches automatically to the cluster's default language and I have to go into HU normal settings to set it back to English UK.

[muzicantini]

Hello. I’d like to ask is there something which could make the oil gauge on the 6wb on my F10 to stay precisely at 12 o’clock when at operating temp? Because when I compare the oil temp reading from the hidden menu the oil gauge correctly starts to move at 50C and but when the oil reading is at 90ishC the gauge is already past 12 o’clock. I am running a BMS oil cooler valve and I know for a fact that the car is not overheating. Is there a way to code/reset the oil gauge. I was contemplating to run the “system test” from the hidden menu but I am afraid since the cluster is not original something might go wrong.