[jovanf30]

Was wondering if anyone has done nitrous,wet/dry shot on the N20

[rjd_F30]

It would blow up if you sprayed any amount that would be worth the bump in power.

[Gen13 F36]

Nitrous... the old Hero of Fast and the Furious.... good luck... let us know

[CandyRedRC46]

https://www.google.com/url?sa=i&sour...62073336760902

[shan3col3]

i was wondering the same thing do u think it would work if i built my engine or is it just not even worth the money and the risk of it blowing up

[sqwinny]

It'll work but your limited to a shot that would put you under 350whp and not spray below 3k or so due to tq on the rods and bolts which is the leading cause of this motor failing (rod bolts with high amounts of low end tq).

Bm3 stage 2 and NO2 (should be nothing more than about a 50 shot) would be safe in theory but a 100 shot should be able to work if you changed rod bolts minimum).

[5mall5nail5]

Originally Posted by rjd_F30

It would blow up if you sprayed any amount that would be worth the bump in power.

Not true - whatever power a turbo setup can produce, you can make on nitrous.

Originally Posted by sqwinny

It'll work but your limited to a shot that would put you under 350whp and not spray below 3k or so due to tq on the rods and bolts which is the leading cause of this motor failing (rod bolts with high amounts of low end tq).

Bm3 stage 2 and NO2 (should be nothing more than about a 50 shot) would be safe in theory but a 100 shot should be able to work if you changed rod bolts minimum).

A progressive setup would probably work with a 150 shot without issue - wet, of course.