01-21-2021, 09:05 AM | #1 |
Major
640
Rep 1,381
Posts |
Modding my adaptive headlights for switchback DRLs
So towards the end of last year I built a custom setup to run RGB led board replacements for my DRL's.
They work great but at the time I couldn't find any boards with a dedicated white chip, unfortunately white on plain old RGB led's looks very un-natural and from the wrong angle it can look blue/purple ish. So I'm back on the modding scheme again, I have found a supplier of RGBW chips including an additional amber chip, this would provide a DRL indicator switchback function. However before I order them I need to decide if I want them sequential or solid, the pcb design differs based on which I choose.. what are peoples thoughts? I have looked at them for far too long and can no longer decide I feel like sequential is totally different and pretty cool, but is it a bit too much? Mockup 1: Mockup 2:
__________________
2015 435i - 401whp
Scorpion catless dp, VRSF 6.5" HD FMIC, MST V2 inlet, NGK 97506, MHD Stage 2+ 102, xHP Stage 3, M Performance Exhaust (modified for valved straight thru) |
Post Reply |
Bookmarks |
|
|