PSdZData Full vs. Lite

shawnsheridan · 11-21-2016, 05:55 AM

Quote:

Originally Posted by gurkanbulut

Hi shawnsheridan,

Could you please send me the link for the latest ESYS and Full psdzdata

Thanks!

PM sent.

flipporabasta · 11-23-2016, 12:17 PM

Thanks Shawnsheridan

timkri · 11-23-2016, 03:59 PM

Hi shawnsheridan,

Could you please send me the link for the latest ESYS that works for the F30 and Full psdzdata

Thanks

shawnsheridan · 11-23-2016, 04:04 PM

Quote:

Originally Posted by timkri

Hi shawnsheridan,

Could you please send me the link for the latest ESYS that works for the F30 and Full psdzdata

Thanks

No. You cannot send or receive PM's yet. Send me one when you can.

timkri · 11-24-2016, 03:04 AM

Ok will do!

shawnsheridan · 11-24-2016, 06:10 AM

Quote:

Originally Posted by timkri

Ok will do!

PM sent.

Lucardos · 11-25-2016, 09:30 AM

hi shawnsheridan,

thanks for the PM.
apparently my car has the latest Istep version: F056-16-11-502

could I use the psdzdata, which apparently does not go higher than F056-16-11-501?

shawnsheridan · 11-25-2016, 09:32 AM

Quote:

Originally Posted by Lucardos

hi shawnsheridan,

thanks for the PM.
apparently my car has the latest Istep version: F056-16-11-502

could I use the psdzdata, which apparently does not go higher than F056-16-11-501?

Quite possibly. Is there any ECU in your SVT that you are unable to read?

Lucardos · 11-25-2016, 09:42 AM

Quote:

Originally Posted by shawnsheridan

Quite possibly. Is there any ECU in your SVT that you are unable to read?

I can read all SVT and can also edit and save it. only it gives me in edit mode a message in the right lower screen in red "found 0 code for current ECU". So I'm in doubt and don't want to brick my car.

shawnsheridan · 11-25-2016, 09:48 AM

Quote:

Originally Posted by Lucardos

I can read all SVT and can also edit and save it. only it gives me in edit mode a message in the right lower screen in red "found 0 code for current ECU". So I'm doubt and don't want to brick my car.

If you can read all ECU, then you are good to go.

"found 0 code for current ECU" means it found no Cheat Codes for that ECU. You are free to code any parameter you like though without use of Cheat Code.

Lucardos · 11-25-2016, 09:49 AM

Quote:

Originally Posted by shawnsheridan

If you can read all ECU, then you are good to go.

"found 0 code for current ECU" means it found no Cheat Codes for that ECU. You are free to code any parameter you like though without use of Cheat Code.

thanks, as always

residentflash · 11-26-2016, 06:48 AM

Hi shawnsheridan,

May I have the link for the ESYS and psdzdata for F30 MD 2013.08?
But I think I need only the Lite Version of the psdzdata for coding and diagnostic purposes.

Thanks

shawnsheridan · 11-26-2016, 09:12 AM

Quote:

Originally Posted by residentflash

Hi shawnsheridan,

May I have the link for the ESYS and psdzdata for F30 MD 2013.08?
But I think I need only the Lite Version of the psdzdata for coding and diagnostic purposes.

Thanks

PM sent.

residentflash · 11-26-2016, 10:05 AM

Thanks!

andy5468 · 11-27-2016, 09:37 AM

Hi guys, just a couple of questions regarding the different software available.

I have what I believe to be ESYS light installed on my laptop which has allowed me to make all the coding changes I want.

I assume if I want to do things like read and reset fault codes and dash lights I need to install the ISTA+ (ISTAD & Rheingold) software that I have recently downloaded from shawnsheridan onto my laptop?

Will installing this affect the ESYS I already have installed, or is this a completely different programme to run alongside ESYS?

shawnsheridan · 11-27-2016, 09:47 AM

Quote:

Originally Posted by andy5468

Hi guys, just a couple of questions regarding the different software available.

I have what I believe to be ESYS light installed on my laptop which has allowed me to make all the coding changes I want.

I assume if I want to do things like read and reset fault codes and dash lights I need to install the ISTA+ (ISTAD & Rheingold) software that I have recently downloaded from shawnsheridan onto my laptop?

Will installing this affect the ESYS I already have installed, or is this a completely different programme to run alongside ESYS?

No impact on E-Sys.

andy5468 · 11-27-2016, 11:39 AM

Quote:

Originally Posted by shawnsheridan

No impact on E-Sys.

Shawn

So I need this full ISTA+ install for fault reading and resetting and my existing ESYS Lite just for coding?

Sorry for all the questions but I am unfamiliar at the moment with all the different software available and exactly what it is capable of.

shawnsheridan · 11-27-2016, 11:57 AM

Quote:

Originally Posted by andy5468

Shawn

So I need this full ISTA+ install for fault reading and resetting and my existing ESYS Lite just for coding?

Sorry for all the questions but I am unfamiliar at the moment with all the different software available and exactly what it is capable of.

Yes.

timkri · 11-30-2016, 04:13 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thanks for all the help, was able to successfully get it working.

shawnsheridan · 11-30-2016, 04:48 PM

Quote:

Originally Posted by timkri

Thanks for all the help, was able to successfully get it working.

moto1969 · 12-02-2016, 06:21 PM

Hi Shawn,

Could you please send me the link for the latest ESYS and Full psdzdata

Thanks!

pcm910 · 12-02-2016, 07:36 PM

Thanks Shawn

11-23-2016, 12:17 PM	#310
flipporabasta BMW n00b 26 Rep 116 Posts Drives: 2012 F30 335i Melbourne Red Join Date: Feb 2016 Location: sweden iTrader: (0) Garage List 2012 BMW F30 335i [0.00]	Thanks Shawnsheridan
	Appreciate 0 Quote

11-23-2016, 03:59 PM	#311
timkri New Member 0 Rep 9 Posts Drives: BMW 328xi Touring M-Sport Join Date: Nov 2016 Location: Sweden iTrader: (0)	Hi shawnsheridan, Could you please send me the link for the latest ESYS that works for the F30 and Full psdzdata Thanks
	Appreciate 0 Quote

11-24-2016, 03:04 AM	#313
timkri New Member 0 Rep 9 Posts Drives: BMW 328xi Touring M-Sport Join Date: Nov 2016 Location: Sweden iTrader: (0)	Ok will do!
	Appreciate 0 Quote

11-25-2016, 09:30 AM	#315
Lucardos Enlisted Member 0 Rep 41 Posts Drives: F48 X1 192HP MINERAL GREY Join Date: Dec 2012 Location: home iTrader: (0)	hi shawnsheridan, thanks for the PM. apparently my car has the latest Istep version: F056-16-11-502 could I use the psdzdata, which apparently does not go higher than F056-16-11-501?
	Appreciate 0 Quote

11-26-2016, 06:48 AM	#320
residentflash Registered 0 Rep 2 Posts Drives: 316i F30 Join Date: Nov 2016 Location: Germany iTrader: (0)	Hi shawnsheridan, May I have the link for the ESYS and psdzdata for F30 MD 2013.08? But I think I need only the Lite Version of the psdzdata for coding and diagnostic purposes. Thanks
	Appreciate 0 Quote

11-26-2016, 10:05 AM	#322
residentflash Registered 0 Rep 2 Posts Drives: 316i F30 Join Date: Nov 2016 Location: Germany iTrader: (0)	Thanks!
	Appreciate 0 Quote

11-27-2016, 09:37 AM	#323
andy5468 Private First Class 90 Rep 146 Posts Drives: BMW G20 M340D LCI Join Date: Aug 2009 Location: UK iTrader: (0)	Hi guys, just a couple of questions regarding the different software available. I have what I believe to be ESYS light installed on my laptop which has allowed me to make all the coding changes I want. I assume if I want to do things like read and reset fault codes and dash lights I need to install the ISTA+ (ISTAD & Rheingold) software that I have recently downloaded from shawnsheridan onto my laptop? Will installing this affect the ESYS I already have installed, or is this a completely different programme to run alongside ESYS?
	Appreciate 0 Quote

12-02-2016, 06:21 PM	#329
moto1969 Registered 0 Rep 3 Posts Drives: F55 MINICOOPERS Join Date: Aug 2015 Location: Osaka,Japan iTrader: (0)	Hi Shawn, Could you please send me the link for the latest ESYS and Full psdzdata Thanks!
	Appreciate 0 Quote

12-02-2016, 07:36 PM	#330
pcm910 Registered 0 Rep 1 Posts Drives: hcm Join Date: Dec 2016 Location: hcm iTrader: (0)	Thanks Shawn __________________ Chuyên diệt côn trùng giá rẻ, diet con trung chuyên nghiệp, diệt côn trùng giá rẻ tận nơi, cong ty diet con trung sinh học, phong chong moi cho công trình xây dựng, diet chuot tai nha triệt để, diet muoi gia re tại tphcm, diet muoi không dùng hóa chất, dich vu diet con trung uy tín
	Appreciate 0 Quote