[Tuerkay]

Originally Posted by emgee

Thanks I just tried it, I still get a blank screen. when I switched cid_com_mode to spi it shows no signal on the display.

"No Signal" means wrong coding most of the Time.
If the screen is blank but the backlight turns on, CID Settings should be correct and there is another issue.

Can you check ISTA for error messages with my listed codings?

[emgee]

Originally Posted by Tuerkay

"No Signal" means wrong coding most of the Time.
If the screen is blank but the backlight turns on, CID Settings should be correct and there is another issue.

Can you check ISTA for error messages with my listed codings?

Originally Posted by Tuerkay

"No Signal" means wrong coding most of the Time.
If the screen is blank but the backlight turns on, CID Settings should be correct and there is another issue.

Can you check ISTA for error messages with my listed codings?

I haven't been able to check with ISTA, my computer doesn't have enough space for the apps. Is there an alternative that I can use to check for errors? On a side note the car has carplay coded via usb along with VIM. I'm not sure if that can be the cause of the issue with the screen.

[Tuerkay]

You can use AIcoder to check DTCs or Tool32 if you have the NBT.prog file.
Can't tell if VIM/Carplay have any influence.

[emgee]

[IMG][/IMG] Turns out it was a faulty lcd. I returned the old one and bought another. Thanks for the help .

[21Inked]

Originally Posted by emgee

[IMG][/IMG] Turns out it was a faulty lcd. I returned the old one and bought another. Thanks for the help .

Looks great. is there any shaving or Grinding on the Display needet to make it fit nicley ?
i also have leather dashboard .

thx

[emgee]

Originally Posted by 21Inked

Looks great. is there any shaving or Grinding on the Display needet to make it fit nicley ?
i also have leather dashboard .

thx

Originally Posted by 21Inked

Looks great. is there any shaving or Grinding on the Display needet to make it fit nicley ?
i also have leather dashboard .

thx

I haven't done any shaving or grinding yet. I might do it just to make the screen sit more flushed with the dashboard.

[deneyer]

Originally Posted by IK6SPEED

Essentially.

More like retrofitting a F80/M3 Wheel.

annybody still has contact with IK6SPEED cause hes banned here.

would like to know how he fitted the steeringwheel, cause i fitted a g steeringwheel in my f15 and this doesnt work at all

[eff32fl]

Originally Posted by deneyer

annybody still has contact with IK6SPEED cause hes banned here.

would like to know how he fitted the steeringwheel, cause i fitted a g steeringwheel in my f15 and this doesnt work at all

I'd love to know how to retrofit a G steering wheel to the F3x chassis as well. The new wheels are super nice! IK6SPEED seemed to be very knowledgeable.

[SniPro]

Originally Posted by eff32fl

I'd love to know how to retrofit a G steering wheel to the F3x chassis as well. The new wheels are super nice! IK6SPEED seemed to be very knowledgeable.

I didn't try however recently saw following steering wheel from G30 which according to what is written was modified to work on F30. So if you are interested in maybe somebody can try it, it will be interesting to know results.
https://www.ebay.com/itm/38419925613...gAAOSwNNVgts8j

[dangerus_car]

Originally Posted by emgee

[IMG][/IMG] Turns out it was a faulty lcd. I returned the old one and bought another. Thanks for the help .

how does it look like from the side and back? is it similar to how FaRKle! does it?

thanks.

[MTTH]

Originally Posted by eff32fl

I'd love to know how to retrofit a G steering wheel to the F3x chassis as well. The new wheels are super nice! IK6SPEED seemed to be very knowledgeable.

Looks like he's on the corvette forums now if you are still wondering. Googled his username & found it.