02-22-2020, 05:40 AM | #1 |
New Member
0
Rep 9
Posts |
F30 Power Fold Mirror - Fault Code question
Hi Guys
I’ve done the retrofit of the power folding mirrors on to my f30. However when running ISTA+ reports that the FEM has 4 error codes. 804341 - Exterior mirror sensor, loeft or right: open circuit or short circuit to B+ D90D06 - Switch block on driver's door: wrong version installed D90D0B - Exterior mirror, left (LIN): Unexpected LIN_slave D90D0F - Exterior mirror, right (LIN): Unexpected LIN_slave Has anyone else experienced this and if so what did you do to fix the errors. I’ve searched the forum but nothing came up matching this issue. Your help is much appreciated. Last edited by M2AFX; 02-22-2020 at 06:23 AM.. |
05-06-2023, 04:36 AM | #2 |
Registered
0
Rep 3
Posts |
Hi There,
Did you ever sort this? Im getting some similar errors after my retrofit. Even after double and triple checking wiring & coding my passenger mirror is still not operating which is annoying |
Appreciate
0
|
05-06-2023, 04:44 AM | #3 |
New Member
0
Rep 9
Posts |
Hi, I used BimmerCode app on my phone and connected to the car via OBD. Then ensured the powerfold feature was switched on.. I think the errors were still there but doesn’t affect the functionality. I don’t remember the exact steps.
|
Appreciate
0
|
11-01-2023, 12:25 AM | #6 | |
Lieutenant Colonel
553
Rep 1,576
Posts |
Quote:
Did you ever resolve this one? D90D06 - Switch block on driver's door: wrong version installed
__________________
Help each other: if you manage to fix your issue (especially with help from this forum), don't be a d*ck and disappear. Follow-up by posting the solution so you can help others.
|
|
Appreciate
0
|
11-01-2023, 08:49 AM | #8 |
Major General
3719
Rep 8,636
Posts |
I think in order to get rid of wrong version you need to VO code the car so it thinks it should have the folding mirrors switch, just activating in Bimmercode is not enough. Depends how much you care!
|
Appreciate
0
|
11-01-2023, 04:17 PM | #9 | |
Lieutenant Colonel
553
Rep 1,576
Posts |
Quote:
(01)PF_SZT_LIN_VAR -> SZT_HIGH_4FACH_FH_SPA_HKL (0A) This is what I had before I coded the car: (01)PF_SZT_LIN_VAR -> SZT_LOW_4FACH_FH_LL And this is what I coded with now, and it worked first time: (01)PF_SZT_LIN_VAR -> SZT_HIGH_4FACH_FH_SPA Your car is probably different, so make sure that you only code the car with the features that you have. HKL is some sort of an automatic trunk opener. I used Binmercode.
__________________
Help each other: if you manage to fix your issue (especially with help from this forum), don't be a d*ck and disappear. Follow-up by posting the solution so you can help others.
Last edited by fe7565; 11-01-2023 at 05:16 PM.. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|