06-22-2017, 01:40 AM | #331 |
New Member
14
Rep 25
Posts |
|
Appreciate
0
|
07-04-2017, 11:43 AM | #332 |
Private First Class
56
Rep 173
Posts |
I need some help. I have just finished helping my neighbor with the retrofit and have run into a problem. The headlights come on (no halo) for a short time then start flashing, then they both turn off. I am getting headlight errors too.
|
Appreciate
0
|
07-04-2017, 12:55 PM | #334 |
Private First Class
56
Rep 173
Posts |
It is a 2012 F30. It had halogens before. Yes, I coded the FEM and added 522 and 524 to the VO. This was my first attempt at VO coding, so it is possible that I did something wrong? I have done FDL coding several times.
|
Appreciate
0
|
09-04-2017, 10:21 AM | #336 |
New Member
5
Rep 21
Posts |
Xenon Headlight Retrofit Issue - US
I just did the Xenon headlight retrofit and have run into a problem. All of the lights work; low, high, signal, and the adaptive lights are working. However, I have an issue where the passenger light will tilt back when hitting the brakes or accelerating even in the slight bit. I have attached a video of the issue. Does anyone have an idea what the problem may be? It doesn't seem like a software issue to me, more like something is loose in the light. I also still need to adjust the headlights down a little bit, but need to figure out how to adjust them.
Thank you for your help in advance. |
Appreciate
0
|
10-11-2017, 03:31 AM | #337 |
Registered
0
Rep 2
Posts |
Xenon Retrofit failure
Hello
I have some Problems with my retrofit from Halogen to Xenon My car is a BMW F20 114i with Halogen I want to upgrade to a F22 Front with Xenon When i was finished i changed the pins (see link) https://1drv.ms/f/s!AgLvCPb2yjMZwDzfoKClefRohZb_ Then i did the coding: Now, VO Code FEM_BODY: Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE. Then go back and FDL Code the following: LWR_AHL_TYP = auto./dyn. LWR+AHL = 03 C_FLC_ENA = F030disable (LWR, Leveling sensor) C_AFS_ENA = F030enable (Light Distribution) C_BLC_ENA = F030enable (AHL) C_CLC_ENA = F030enabl (Cornering light) Following Problems i have now Low Beams are flickering after Engine start (Appendix) High Beams dont work DRL dont work indicator are OK please can someone help me? |
Appreciate
0
|
11-20-2017, 07:03 PM | #339 |
Captain
130
Rep 765
Posts |
That's if they are not adaptive. 524 for adaptive. Write new FA then Vo code fem then do ur fdl coding.
Last edited by Jhnblckwood; 11-20-2017 at 07:08 PM.. |
Appreciate
0
|
12-21-2017, 05:36 PM | #342 |
New Member
0
Rep 6
Posts |
Hi Guys, I just bought my first BMW, it’s a F31 from 2013 and I’m super happy with my new ride:-)
I currently have the halogen lights but I’m planning to retrofit the adaptive Xenon headlights :-) I would like to place only the adaptive xenon headlights without the automatic leveling system. Is it possible to code it like this that I can keep using the manual adjustment wheel on my dashboard to change the leveling manually for the low beam? For me this is important as my car will otherwise not pass the yearly check that we have in the Netherlands. Thanks in advance, Bas |
Appreciate
0
|
01-15-2018, 02:35 AM | #343 |
Registered
0
Rep 3
Posts |
f30 LCI Halogen LED to Full LED Headlights
Morning Guys, i have an 2015 F31 LCI the car come with standard LED rear lights but halogen Headlights with LED DRL, i want to upgrade to the LCI LED headlights i have the 2 headlights as complete but what else will i need if anyone can help
|
Appreciate
0
|
01-15-2018, 06:00 AM | #345 |
Registered
0
Rep 3
Posts |
|
Appreciate
0
|
06-12-2018, 07:03 AM | #348 | |
Registered
0
Rep 4
Posts |
Quote:
|
|
Appreciate
0
|
06-14-2018, 03:20 PM | #350 |
Captain
130
Rep 765
Posts |
|
Appreciate
0
|
06-14-2018, 03:21 PM | #351 |
Captain
130
Rep 765
Posts |
|
Appreciate
0
|
06-21-2018, 07:27 AM | #352 |
Registered
0
Rep 4
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|