[bmw24hr]

Hi guys, I'm going to upgrade my wheel and I'm trying to put 9" width to the front and 10" width to the back.

Any suggestion please? The rim is preorder so I can't try it first and I have checked with BMW SA but they only have 8" width rim only.

Thank you in advance

[bmw24hr]

I little worry if I chose a wrong offset

[fliyer]

Hello,

look´s good but be carfully

[rambleon84]

I run:
19x8.5 et37 225.45 Front
19x9.5 et33 255.40 Rear

Compared to yours:
https://willtheyfit.com/index.php?wi...8.5&offset2=29

https://willtheyfit.com/index.php?wi...=10&offset2=42

I am running ACSchnitzer lowering springs:


You are running slightly more narrow tires, i think they should work. Since that picture, I have a 5mm spacer up front..so you always have that option if you need more clearance with the front strut

[Velocifero23]

Originally Posted by rambleon84

I run:
19x8.5 et37 225.45 Front
19x9.5 et33 255.40 Rear

Compared to yours:
https://willtheyfit.com/index.php?wi...8.5&offset2=29

https://willtheyfit.com/index.php?wi...=10&offset2=42

I am running ACSchnitzer lowering springs:



You are running slightly more narrow tires, i think they should work. Since that picture, I have a 5mm spacer up front..so you always have that option if you need more clearance with the front strut

How much did the ACS springs bring you down? I was looking at the H&R Sports.

[schlyter]

they look real nice

[trebot]

damn, looking good!

[rambleon84]

Originally Posted by Velocifero23

How much did the ACS springs bring you down? I was looking at the H&R Sports.

I'll have to see if i made notes when i installed them if i measured before and after. Otherwise, i think they were advertised as 20-25mm and seems like the rear went down a little more than the front (if i had coilovers, i would lower the fronts another 10-15mm.)

[yomismo]

Originally Posted by rambleon84

I run:
19x8.5 et37 225.45 Front
19x9.5 et33 255.40 Rear

Compared to yours:
https://willtheyfit.com/index.php?wi...8.5&offset2=29

https://willtheyfit.com/index.php?wi...=10&offset2=42

I am running ACSchnitzer lowering springs:


You are running slightly more narrow tires, i think they should work. Since that picture, I have a 5mm spacer up front..so you always have that option if you need more clearance with the front strut

Thank you so much