F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > F30 DIYs and Coding Discussions > Coding: Rear Light Bars Remapped For Turn Signals - Still Enabled for Tails
GetBMWParts
Post Reply
 
Thread Tools Search this Thread
      09-18-2019, 09:23 PM   #89
SLF80
Private First Class
United_States
23
Rep
121
Posts

Drives: 2014 F80
Join Date: Jul 2016
Location: Los Angeles, CA

iTrader: (0)

Quote:
Originally Posted by Tim@codemybimmer View Post
The thread about the Eyebrows remapped for turn signals over here - http://f30.bimmerpost.com/forums/sho....php?t=1264291 got me thinking...

Is it possible to remap an addition function for the Rear Light Bars to function as turn signals without removing the taillight function?

The answer...

YES!

Simply remap the following:

MAPPING_TAGFAHRL_H2_L_OUTPUT > sl_2_l
MAPPING_TAGFAHRL_H2_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H2_R_OUTPUT > sl_2_r
MAPPING_TAGFAHRL_H2_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H_L_OUTPUT > sl_l
MAPPING_TAGFAHRL_H_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H_R_OUTPUT > sl-r
MAPPING_TAGFAHRL_H_R_FUNCTION > werte 07

So in order for the light bars to be repurposed as turn signals (still function as taillights at night) - we're remapping the supposed DRL functions for the taillights to be used as turn signals instead.


This is a bad idea
Appreciate 1
      09-20-2019, 08:31 PM   #90
MAKH 5
Second Lieutenant
MAKH 5's Avatar
United_States
49
Rep
210
Posts

Drives: 335i Sport Line
Join Date: May 2019
Location: NYC

iTrader: (0)

Quote:
Originally Posted by shammy786 View Post
Quote:
Originally Posted by Nitrof23MT View Post
I coded my F23...the LED bar works as a blinker but my inner brake light is flashing with the blinker. The picture attached shows what the blinker looks like when it is flashing. Can anyone help me figure out how to get this bulb not to flash with my blinker? It would be much appreciated Everything else though is working as intended.


I used this code:

REAR LIGHT BARS REMAPPED FOR TURN SIGNALS

MAPPING_TAGFAHRL_H2_L_OUTPUT > sl_2_l
MAPPING_TAGFAHRL_H2_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H2_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H2_R_OUTPUT > sl_2_r
MAPPING_TAGFAHRL_H2_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H2_R_PRIORITY > Priority 1
--
MAPPING_TAGFAHRL_H_L_OUTPUT > sl_l
MAPPING_TAGFAHRL_H_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H_R_OUTPUT > sl-r
MAPPING_TAGFAHRL_H_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H_R_PRIORITY > Priority 1
--
MAPPING_STANDL_H1_L_PRIORITY > Priority 3
MAPPING_STANDL_H1_R_PRIORITY > Priority 3
--
MAPPING_STANDL_H2_L_PRIORITY > Priority 4
MAPPING_STANDL_H2_R_PRIORITY > Priority 4
--
Turn off L/R Rear Orange Turn signal
MAPPING_BLINKER_H_L_PWM_LEVEL_1 > 00
MAPPING_BLINKER_H_R_PWM_LEVEL_1 > 00


Are your tail light bars on ALL the time as well as flashing when indicating?
I would love to do the same thing. Lost that functionality when this was coded in. Has anyone figured this out. Or by changing the parameters for this mod are we relinquishing the ability to do that?
Appreciate 0
      09-21-2019, 05:59 PM   #91
Nitrof23MT
New Member
0
Rep
14
Posts

Drives: 228ix convert, 528i, x3 35i
Join Date: Sep 2018
Location: midwest

iTrader: (0)

Quote:
Originally Posted by shammy786 View Post
Quote:
Originally Posted by Nitrof23MT View Post
I coded my F23...the LED bar works as a blinker but my inner brake light is flashing with the blinker. The picture attached shows what the blinker looks like when it is flashing. Can anyone help me figure out how to get this bulb not to flash with my blinker? It would be much appreciated Everything else though is working as intended.


I used this code:

REAR LIGHT BARS REMAPPED FOR TURN SIGNALS

MAPPING_TAGFAHRL_H2_L_OUTPUT > sl_2_l
MAPPING_TAGFAHRL_H2_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H2_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H2_R_OUTPUT > sl_2_r
MAPPING_TAGFAHRL_H2_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H2_R_PRIORITY > Priority 1
--
MAPPING_TAGFAHRL_H_L_OUTPUT > sl_l
MAPPING_TAGFAHRL_H_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H_R_OUTPUT > sl-r
MAPPING_TAGFAHRL_H_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H_R_PRIORITY > Priority 1
--
MAPPING_STANDL_H1_L_PRIORITY > Priority 3
MAPPING_STANDL_H1_R_PRIORITY > Priority 3
--
MAPPING_STANDL_H2_L_PRIORITY > Priority 4
MAPPING_STANDL_H2_R_PRIORITY > Priority 4
--
Turn off L/R Rear Orange Turn signal
MAPPING_BLINKER_H_L_PWM_LEVEL_1 > 00
MAPPING_BLINKER_H_R_PWM_LEVEL_1 > 00


Are your tail light bars on ALL the time as well as flashing when indicating?
Unfortunately they do not. I was more concerned with the blinking inner brake light that blinks with my coded LED light bar. Doesn't look very clean... I never figured that out. Did you get yours to stay on?
Appreciate 0
      10-12-2019, 09:28 AM   #92
mickyle1995
Private
11
Rep
67
Posts

Drives: bmw 4 series f32 420d
Join Date: Apr 2019
Location: birmingham, england

iTrader: (0)

Quote:
Originally Posted by Nitrof23MT View Post
Quote:
Originally Posted by Nitrof23MT View Post
I coded my F23...the LED bar works as a blinker but my inner brake light is flashing with the blinker. The picture attached shows what the blinker looks like when it is flashing. Can anyone help me figure out how to get this bulb not to flash with my blinker? It would be much appreciated Everything else though is working as intended.


I used this code:

REAR LIGHT BARS REMAPPED FOR TURN SIGNALS

MAPPING_TAGFAHRL_H2_L_OUTPUT > sl_2_l
MAPPING_TAGFAHRL_H2_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H2_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H2_R_OUTPUT > sl_2_r
MAPPING_TAGFAHRL_H2_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H2_R_PRIORITY > Priority 1
--
MAPPING_TAGFAHRL_H_L_OUTPUT > sl_l
MAPPING_TAGFAHRL_H_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H_R_OUTPUT > sl-r
MAPPING_TAGFAHRL_H_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H_R_PRIORITY > Priority 1
--
MAPPING_STANDL_H1_L_PRIORITY > Priority 3
MAPPING_STANDL_H1_R_PRIORITY > Priority 3
--
MAPPING_STANDL_H2_L_PRIORITY > Priority 4
MAPPING_STANDL_H2_R_PRIORITY > Priority 4
--
Turn off L/R Rear Orange Turn signal
MAPPING_BLINKER_H_L_PWM_LEVEL_1 > 00
MAPPING_BLINKER_H_R_PWM_LEVEL_1 > 00
Well I figured out my own question about the inner brake light blinking for a 2 series pre LCi tail lamp. I changed the top two paragraphs from what I originally coded. It is not perfect though....if you leave it in automatic headlights everything functions so I was good with that for now. Do not think the DRL in the rear are on all the time so I will take a look at that eventually.

MAPPING_TAGFAHRL_H2_L_OUTPUT > sl_2_l
MAPPING_TAGFAHRL_H2_L_FUNCTION > tagfahrilcht 0x04
MAPPING_TAGFAHRL_H2_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H2_R_OUTPUT > sl_2_r
MAPPING_TAGFAHRL_H2_R_FUNCTION > tagfahrilcht 0x04
MAPPING_TAGFAHRL_H2_R_PRIORITY > Priority 1
--
MAPPING_TAGFAHRL_H_L_OUTPUT > sl_l
MAPPING_TAGFAHRL_H_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H_R_OUTPUT > sl-r
MAPPING_TAGFAHRL_H_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H_R_PRIORITY > Priority 1
--
MAPPING_STANDL_H1_L_PRIORITY > Priority 3
MAPPING_STANDL_H1_R_PRIORITY > Priority 3
--
MAPPING_STANDL_H2_L_PRIORITY > Priority 4
MAPPING_STANDL_H2_R_PRIORITY > Priority 4
--
Turn off L/R Rear Orange Turn signal
MAPPING_BLINKER_H_L_PWM_LEVEL_1 > 00
MAPPING_BLINKER_H_R_PWM_LEVEL_1 > 00
where it says werte (number) mine does have the option was this a custom value?
Appreciate 0
      10-12-2019, 03:16 PM   #93
mickyle1995
Private
11
Rep
67
Posts

Drives: bmw 4 series f32 420d
Join Date: Apr 2019
Location: birmingham, england

iTrader: (0)

Quote:
Originally Posted by mickyle1995 View Post
Quote:
Originally Posted by Nitrof23MT View Post
Quote:
Originally Posted by Nitrof23MT View Post
I coded my F23...the LED bar works as a blinker but my inner brake light is flashing with the blinker. The picture attached shows what the blinker looks like when it is flashing. Can anyone help me figure out how to get this bulb not to flash with my blinker? It would be much appreciated Everything else though is working as intended.


I used this code:

REAR LIGHT BARS REMAPPED FOR TURN SIGNALS

MAPPING_TAGFAHRL_H2_L_OUTPUT > sl_2_l
MAPPING_TAGFAHRL_H2_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H2_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H2_R_OUTPUT > sl_2_r
MAPPING_TAGFAHRL_H2_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H2_R_PRIORITY > Priority 1
--
MAPPING_TAGFAHRL_H_L_OUTPUT > sl_l
MAPPING_TAGFAHRL_H_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H_R_OUTPUT > sl-r
MAPPING_TAGFAHRL_H_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H_R_PRIORITY > Priority 1
--
MAPPING_STANDL_H1_L_PRIORITY > Priority 3
MAPPING_STANDL_H1_R_PRIORITY > Priority 3
--
MAPPING_STANDL_H2_L_PRIORITY > Priority 4
MAPPING_STANDL_H2_R_PRIORITY > Priority 4
--
Turn off L/R Rear Orange Turn signal
MAPPING_BLINKER_H_L_PWM_LEVEL_1 > 00
MAPPING_BLINKER_H_R_PWM_LEVEL_1 > 00
Well I figured out my own question about the inner brake light blinking for a 2 series pre LCi tail lamp. I changed the top two paragraphs from what I originally coded. It is not perfect though....if you leave it in automatic headlights everything functions so I was good with that for now. Do not think the DRL in the rear are on all the time so I will take a look at that eventually.

MAPPING_TAGFAHRL_H2_L_OUTPUT > sl_2_l
MAPPING_TAGFAHRL_H2_L_FUNCTION > tagfahrilcht 0x04
MAPPING_TAGFAHRL_H2_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H2_R_OUTPUT > sl_2_r
MAPPING_TAGFAHRL_H2_R_FUNCTION > tagfahrilcht 0x04
MAPPING_TAGFAHRL_H2_R_PRIORITY > Priority 1
--
MAPPING_TAGFAHRL_H_L_OUTPUT > sl_l
MAPPING_TAGFAHRL_H_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H_R_OUTPUT > sl-r
MAPPING_TAGFAHRL_H_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H_R_PRIORITY > Priority 1
--
MAPPING_STANDL_H1_L_PRIORITY > Priority 3
MAPPING_STANDL_H1_R_PRIORITY > Priority 3
--
MAPPING_STANDL_H2_L_PRIORITY > Priority 4
MAPPING_STANDL_H2_R_PRIORITY > Priority 4
--
Turn off L/R Rear Orange Turn signal
MAPPING_BLINKER_H_L_PWM_LEVEL_1 > 00
MAPPING_BLINKER_H_R_PWM_LEVEL_1 > 00
where it says werte (number) mine does have the option was this a custom value?
doesn't*
Appreciate 0
      10-12-2019, 07:52 PM   #94
borhanlin
New Member
0
Rep
8
Posts

Drives: BMW F10 528ixDrive
Join Date: Nov 2017
Location: Taiwan

iTrader: (0)

Unfortunately, these parameters are not found in FRM.

-----------------------------------------------------------
REAR LIGHT BARS REMAPPED FOR TURN SIGNALS

MAPPING_TAGFAHRL_H2_L_OUTPUT > sl_2_l
MAPPING_TAGFAHRL_H2_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H2_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H2_R_OUTPUT > sl_2_r
MAPPING_TAGFAHRL_H2_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H2_R_PRIORITY > Priority 1
--
MAPPING_TAGFAHRL_H_L_OUTPUT > sl_l
MAPPING_TAGFAHRL_H_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H_R_OUTPUT > sl-r
MAPPING_TAGFAHRL_H_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H_R_PRIORITY > Priority 1
--
MAPPING_STANDL_H1_L_PRIORITY > Priority 3
MAPPING_STANDL_H1_R_PRIORITY > Priority 3
--
MAPPING_STANDL_H2_L_PRIORITY > Priority 4
MAPPING_STANDL_H2_R_PRIORITY > Priority 4
--
Turn off L/R Rear Orange Turn signal
MAPPING_BLINKER_H_L_PWM_LEVEL_1 > 00
MAPPING_BLINKER_H_R_PWM_LEVEL_1 > 00
-----------------------------------------------------------

Can only FRM F10 have an opportunity to achieve it?

Thank you
Appreciate 0
      10-16-2019, 10:26 AM   #95
mickyle1995
Private
11
Rep
67
Posts

Drives: bmw 4 series f32 420d
Join Date: Apr 2019
Location: birmingham, england

iTrader: (0)

heres a tutorial https://m.youtube.com/watch?feature=...;v=bpPu2_DjQTs
Appreciate 0
      12-29-2019, 08:01 PM   #96
Souheil
Registered
Canada
0
Rep
3
Posts

Drives: 2013 BMW 320i Xdrive
Join Date: Mar 2019
Location: Canada

iTrader: (0)

Quote:
Originally Posted by SalpacinoBMW View Post
So with some help from Mwahab (thank you) and some messing around with the settings, i finally figured out how to get this to work with the Automatic and all light settings (Automatic, Off, Parking Lights, Headlamps). Looks like i just needed to set the priority fields. Below is the complete coding needed to get the Rear Light Bars Remapped For Turn Signals and turn off the actual rear corner orange turn signals.


REAR LIGHT BARS REMAPPED FOR TURN SIGNALS

MAPPING_TAGFAHRL_H2_L_OUTPUT > sl_2_l
MAPPING_TAGFAHRL_H2_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H2_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H2_R_OUTPUT > sl_2_r
MAPPING_TAGFAHRL_H2_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H2_R_PRIORITY > Priority 1
--
MAPPING_TAGFAHRL_H_L_OUTPUT > sl_l
MAPPING_TAGFAHRL_H_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H_R_OUTPUT > sl-r
MAPPING_TAGFAHRL_H_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H_R_PRIORITY > Priority 1
--
MAPPING_STANDL_H1_L_PRIORITY > Priority 3
MAPPING_STANDL_H1_R_PRIORITY > Priority 3
--
MAPPING_STANDL_H2_L_PRIORITY > Priority 4
MAPPING_STANDL_H2_R_PRIORITY > Priority 4
--
Turn off L/R Rear Orange Turn signal
MAPPING_BLINKER_H_L_PWM_LEVEL_1 > 00
MAPPING_BLINKER_H_L_PWM_LEVEL_r > 00
LAST CODE IS AN ERROR. LAST CODE SHOULD BE “MAPPING_BLINKER_H_R_PWM_LEVEL_1>00”
“_H_R_” instead of “_H_L_” and “LEVEL_1” instead of “LEVEL_r”
Appreciate 0
      01-10-2020, 10:44 AM   #97
F36GC_NYC
Captain
United_States
151
Rep
742
Posts

Drives: 2016 EB 435GC xdrive
Join Date: Nov 2019
Location: Queens, NYC

iTrader: (0)

Quote:
Originally Posted by Tim@codemybimmer View Post
The thread about the Eyebrows remapped for turn signals over here - http://f30.bimmerpost.com/forums/sho....php?t=1264291 got me thinking...

Is it possible to remap an addition function for the Rear Light Bars to function as turn signals without removing the taillight function?

The answer...



YES!

Simply remap the following:

MAPPING_TAGFAHRL_H2_L_OUTPUT > sl_2_l
MAPPING_TAGFAHRL_H2_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H2_R_OUTPUT > sl_2_r
MAPPING_TAGFAHRL_H2_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H_L_OUTPUT > sl_l
MAPPING_TAGFAHRL_H_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H_R_OUTPUT > sl-r
MAPPING_TAGFAHRL_H_R_FUNCTION > werte 07

So in order for the light bars to be repurposed as turn signals (still function as taillights at night) - we're remapping the supposed DRL functions for the taillights to be used as turn signals instead.
will this work for the f36?
__________________
2016 435i xDrive F36 M Sport - ER CP | ER Catless DP | VRSF 5" FMIC | bm3 stage 2 93 oct | black double slotted grill | AWE axle back exhaust w/102mm diamond black tips | 437m wheels
Appreciate 0
      04-27-2020, 01:01 PM   #98
aliorala
New Member
0
Rep
15
Posts

Drives: F30 (2013)
Join Date: Apr 2020
Location: TURKEY

iTrader: (0)

Quote:
Originally Posted by SalpacinoBMW View Post
So with some help from Mwahab (thank you) and some messing around with the settings, i finally figured out how to get this to work with the Automatic and all light settings (Automatic, Off, Parking Lights, Headlamps). Looks like i just needed to set the priority fields. Below is the complete coding needed to get the Rear Light Bars Remapped For Turn Signals and turn off the actual rear corner orange turn signals.


REAR LIGHT BARS REMAPPED FOR TURN SIGNALS

MAPPING_TAGFAHRL_H2_L_OUTPUT > sl_2_l
MAPPING_TAGFAHRL_H2_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H2_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H2_R_OUTPUT > sl_2_r
MAPPING_TAGFAHRL_H2_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H2_R_PRIORITY > Priority 1
--
MAPPING_TAGFAHRL_H_L_OUTPUT > sl_l
MAPPING_TAGFAHRL_H_L_FUNCTION > werte 06
MAPPING_TAGFAHRL_H_L_PRIORITY > Priority 1

MAPPING_TAGFAHRL_H_R_OUTPUT > sl-r
MAPPING_TAGFAHRL_H_R_FUNCTION > werte 07
MAPPING_TAGFAHRL_H_R_PRIORITY > Priority 1
--
MAPPING_STANDL_H1_L_PRIORITY > Priority 3
MAPPING_STANDL_H1_R_PRIORITY > Priority 3
--
MAPPING_STANDL_H2_L_PRIORITY > Priority 4
MAPPING_STANDL_H2_R_PRIORITY > Priority 4
--
Turn off L/R Rear Orange Turn signal
MAPPING_BLINKER_H_L_PWM_LEVEL_1 > 00
MAPPING_BLINKER_H_L_PWM_LEVEL_r > 00
hi,
can we do it for angel eyes?
Appreciate 0
      06-22-2020, 09:08 AM   #99
Enemy75
New Member
0
Rep
5
Posts

Drives: Bmw F10
Join Date: Sep 2014
Location: Warsaw

iTrader: (0)

Hello,
I have a Mini but I and browsing the internet to find experts in coding tail lights and came across this thread. I am wondering if you are able to help me.
My project is to convert basic bulb tail lights in m MINI F56 to expanded pre_LCi version with LED ring. I am trying to figure out what is the best way to do it.
In the current lamp i have 5 wires: ground, reverse bulb, direction indicator bulb and two wires that go to two bulbs that are regular lights and braking lights as well. They are both powered with 6V and voltage rises to 12V when brake pedal is hit.
The LED lamp has the same bulb pattern and additional LED ring. The ring is currently not working as there is no wire to it and an empty spare slot in the plug.
My first thought was that I should code the car with the LED light option (S5A4) and add extra wire from BDC to LED ring in the lamp, but i still have front halogen lights so I am affraid that this will cause a lot of faults to come up. I also found another car that has halogen front lights and LED rear lights and decoded its VIN - there was no LED option on the list.

So, the second option would be to plug one of the existing wires with to LED ring and split the other to both bulb to work only as braking light. But then I would need to code the car to power LED wire with a constant current and the other wire (the splitted one) to supply 12V power only when braking. In this option I am also affraid if it is safe to split the cable to operate with two bulbs.

Third option and I think this is the best one would be leaving wires as is but to code tail light bulbs only to work when braking so eliminating the double function of regular light. I would need to add an extra wire and program it to work with LED ring. If this is doable i need your guidance how to remap tail lights.


What would be your recommendation?

Thank you!

Last edited by Enemy75; 06-23-2020 at 01:51 AM..
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:29 AM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST