F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > F30 DIYs and Coding Discussions > Is it possible to clear check engine codes with Esys / an ENET cable?
UroTuning
Post Reply
 
Thread Tools Search this Thread
      01-27-2015, 10:23 AM   #89
shawnsheridan
General
shawnsheridan's Avatar
United_States
3723
Rep
20,205
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Lucardos View Post
Hi Shawn,

thanks for your help. I was able to fix this problem.

I only have one problem that i don't get away. After coding my rear PDC stopped working. every time i put it in reverse i get error "no parking assistance, have the problem checked by service"

I already have put the old CAFD for Hu-CIC and REM, but the problem remains.
any suggestions?

Lucardos
Does your PDC module have CAFD with Green Dot?
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      01-27-2015, 11:18 AM   #90
Lucardos
Enlisted Member
No_Country
0
Rep
40
Posts

Drives: F48 X1 192HP MINERAL GREY
Join Date: Dec 2012
Location: home

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
Does your PDC module have CAFD with Green Dot?
Hi Shawn,

I do not have a PDC module. I also checked in previous SVT files but also there's no PDC present.

I only have rear PDC.

Appreciate 0
      01-27-2015, 11:22 AM   #91
shawnsheridan
General
shawnsheridan's Avatar
United_States
3723
Rep
20,205
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
So does REM then?
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      01-27-2015, 11:31 AM   #92
Lucardos
Enlisted Member
No_Country
0
Rep
40
Posts

Drives: F48 X1 192HP MINERAL GREY
Join Date: Dec 2012
Location: home

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
So does REM then?
Yes, REM has a green dot. I also have replaced the old CAFD to be sure all settings are ok.

Can I do al VO code for all CAFD again, this time with no engine running, without causing problems.
could it be that during my previous VO coding something else was set wrong?
Appreciate 0
      01-27-2015, 11:39 AM   #93
shawnsheridan
General
shawnsheridan's Avatar
United_States
3723
Rep
20,205
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Is your FA original or modified?
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      01-27-2015, 11:46 AM   #94
Lucardos
Enlisted Member
No_Country
0
Rep
40
Posts

Drives: F48 X1 192HP MINERAL GREY
Join Date: Dec 2012
Location: home

iTrader: (0)

at this moment FA is completely original. (old saved file)
Appreciate 0
      01-27-2015, 11:46 AM   #95
shawnsheridan
General
shawnsheridan's Avatar
United_States
3723
Rep
20,205
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Well, I have no idea what is up with PDC then.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      01-27-2015, 11:48 AM   #96
Lucardos
Enlisted Member
No_Country
0
Rep
40
Posts

Drives: F48 X1 192HP MINERAL GREY
Join Date: Dec 2012
Location: home

iTrader: (0)

Can I try to do a VO code for all CAFD again, this time with no engine running, without causing problems? I now have only VO coded REM and Hu-CIC.
Appreciate 0
      01-27-2015, 11:56 AM   #97
shawnsheridan
General
shawnsheridan's Avatar
United_States
3723
Rep
20,205
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Yes. You can run the motor and VO Code everything except DME. DME is not the issue for sure.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      02-07-2015, 01:36 AM   #98
9114s
Life is short
9114s's Avatar
United_States
0
Rep
19
Posts

Drives: 2014-i3
Join Date: Apr 2013
Location: Bay area CA

iTrader: (0)

Hello could you send me the last tool32?

I would like to clear the airbag fault.

thanks Chris
Appreciate 0
      02-07-2015, 08:41 AM   #99
shawnsheridan
General
shawnsheridan's Avatar
United_States
3723
Rep
20,205
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by 9114s View Post
Hello could you send me the last tool32?

I would like to clear the airbag fault.

thanks Chris
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      02-07-2015, 12:35 PM   #100
9114s
Life is short
9114s's Avatar
United_States
0
Rep
19
Posts

Drives: 2014-i3
Join Date: Apr 2013
Location: Bay area CA

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
PM sent.
Thank you! Tool32 works perfectly with my i3 to clear up CEL.
Appreciate 0
      02-07-2015, 12:40 PM   #101
shawnsheridan
General
shawnsheridan's Avatar
United_States
3723
Rep
20,205
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by 9114s View Post
Thank you! Tool32 works perfectly with my i3 to clear up CEL.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      02-16-2015, 03:37 PM   #102
sistrax
Registered
0
Rep
2
Posts

Drives: BMW F21
Join Date: Oct 2012
Location: SPAIN

iTrader: (0)

Hi, I can spend tool32 me too?
I have a fault in the water level indicator wiper saved want to remove.

Thanks, greetings.
Appreciate 0
      02-16-2015, 05:17 PM   #103
shawnsheridan
General
shawnsheridan's Avatar
United_States
3723
Rep
20,205
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by sistrax View Post
Hi, I can spend tool32 me too?
I have a fault in the water level indicator wiper saved want to remove.

Thanks, greetings.
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      02-17-2015, 11:26 AM   #104
sistrax
Registered
0
Rep
2
Posts

Drives: BMW F21
Join Date: Oct 2012
Location: SPAIN

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
PM sent.

Thank you so much!
Appreciate 0
      03-03-2015, 09:12 AM   #105
squidlyboy
Major
squidlyboy's Avatar
United_States
515
Rep
1,034
Posts

Drives: 2014 Alpine White 328i M-Sport
Join Date: Jul 2014
Location: Chandler, Arizona

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
Is your FA original or modified?
Hey Shawn - since we're on the subject of REM/PDC... i'm looking to do a rear PDC retrofit on my F30. In order to do that, i need to retrofit my REM with an upgraded REM that has an additional connector needed to support rear PDC sensors.

The part that makes me nervous about this is the coding required. I've done cosmetic coding successfully for lighting, disabling warnings, etc... but nothing this major. Would it be as simple as adding a new option to the car? And actually i don't even know how to do that

Do you know what i need to do in order to code up the new REM for this PDC retrofit? I assume my current CAFD will not work.
Appreciate 0
      03-03-2015, 02:18 PM   #106
shawnsheridan
General
shawnsheridan's Avatar
United_States
3723
Rep
20,205
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
My best guess is you would need to add one of these option codes to FA (depending on exactly what you retrofit), and then VO code ICM, PDC, and Head Unit:

S507A Park Distance Control (PDC) Rear
S508A Park Distance Control (PDC) Front & Rear
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      03-04-2015, 09:12 AM   #107
squidlyboy
Major
squidlyboy's Avatar
United_States
515
Rep
1,034
Posts

Drives: 2014 Alpine White 328i M-Sport
Join Date: Jul 2014
Location: Chandler, Arizona

iTrader: (0)

I didn't realize you can still have a bunch of errors even though nothing shows up on the dash. That, and the fact that coding changes to one module could affect others somewhat concerns me. I'd like to see what potentially hidden errors show up as i did a bunch of seemingly cosmetic code changes recently.

Can i get a link to the EDIABAS/Tool32 software?

Also this INPA or ISTA Reingold diag tool seems intriguing - can i get a link to that as well to check it out?

Thanks Shawn!
Appreciate 0
      03-04-2015, 12:11 PM   #108
shawnsheridan
General
shawnsheridan's Avatar
United_States
3723
Rep
20,205
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by squidlyboy View Post
I didn't realize you can still have a bunch of errors even though nothing shows up on the dash. That, and the fact that coding changes to one module could affect others somewhat concerns me. I'd like to see what potentially hidden errors show up as i did a bunch of seemingly cosmetic code changes recently.

Can i get a link to the EDIABAS/Tool32 software?

Also this INPA or ISTA Reingold diag tool seems intriguing - can i get a link to that as well to check it out?

Thanks Shawn!
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      03-05-2015, 01:59 AM   #109
petau
New Member
2
Rep
19
Posts

Drives: F30
Join Date: Dec 2014
Location: west coast

iTrader: (0)

Hi shawnsheridan,

could i also get a link to the EDIABAS/Tool32 to clear my check engine code as well?

Thanks!
Appreciate 0
      03-05-2015, 12:24 PM   #110
shawnsheridan
General
shawnsheridan's Avatar
United_States
3723
Rep
20,205
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by petau View Post
Hi shawnsheridan,

could i also get a link to the EDIABAS/Tool32 to clear my check engine code as well?

Thanks!
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 1
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:54 AM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST