[chrbmw]

Originally Posted by atzebmw

The VCM includes a list of your ecus.
But if you change an ecu (Kombi --> DKombi) the VCM doesn't notice that if the hook in the settings isn't set because the VCM will not be updated automatically.
I think that's why you still see the Kombi.
You can do the following to update the VCM with the DKombi.
Set the hook in the settings and then code the ZBE.
ZBE because that's an ecu that does not have a big effect if you code it.
After that hit again the button "Read VCM".
You can also try to hit the button Read Ecu.
Because this button always reads the currently available ecus.

When I press Read ECU. I get this!



Any assistance it greatly appreciated. Again I am willing to pay for remote coding session. (Even just an attempt to correct it)

[atzebmw]

Originally Posted by chrbmw

When I press Read ECU. I get this!

Attachment 2458382

Any assistance it greatly appreciated. Again I am willing to pay for remote coding session. (Even just an attempt to correct it)

Change the Zeitkriterium back to 03-2015 and try again.

[chrbmw]

Originally Posted by atzebmw

Change the Zeitkriterium back to 03-2015 and try again.

I have tried.
But I don't see any Kombi or DKombi
This is what I get if I press Read ECU





If I press Calculate this is what i see: (not sure what this does though!)


With this I am unable to access the DKOMBI. It is saying missing some btld files.

No matter what I do I can't get in contact with the 6WB.
I only manages to inject cafd initially into the 6WB when I first fitted it, and then it worked. Then I wanted to add HUD (610), I then tried to inject cafd again, but then is failed, and now it´s locked!

And also why do I see HU_Entrynav2?
I think I have bid over more than I could chew with this 6WB coding :-)


To me it seems like changing the Zeitkriterium causes all sorts of issues, where different ECU´s have to have their own "Zeitkriterium" to work!

Don't you think that I have to flash the ECU´s to get it to work again? I'm still on the original I-Step F020-15-03-502

[atzebmw]

Originally Posted by chrbmw

And also why do I see HU_Entrynav2?
I think I have bid over more than I could chew with this 6WB coding :-)


To me it seems like changing the Zeitkriterium causes all sorts of issues, where different ECU´s have to have their own "Zeitkriterium" to work!

Don't you think that I have to flash the ECU´s to get it to work again? I'm still on the original I-Step F020-15-03-502

I think HU-Entrynav2 you see because of the Zeitkriterium.
The car is expecting an Entrynav2 because of the Year of the Zeitkriterium.

And yes, maybe you have to flash the ecus but i'm not sure.
As i remember i retrofitted the 6WB in my car and it an i-step from 2016 and it worked great.

And for the HUD is just got an idea.
Do you see the checkmark for the HUD and is it activated?

Otherwise i have no other ideas.

[chrbmw]

Originally Posted by atzebmw

I think HU-Entrynav2 you see because of the Zeitkriterium.
The car is expecting an Entrynav2 because of the Year of the Zeitkriterium.

And yes, maybe you have to flash the ecus but i'm not sure.
As i remember i retrofitted the 6WB in my car and it an i-step from 2016 and it worked great.

And for the HUD is just got an idea.
Do you see the checkmark for the HUD and is it activated?

Otherwise i have no other ideas.

I think it is all working again.



I think the problem was that I might have uploaded some incorrect cafd into the HU_Entrynav. I noticed that the MOST connections were deactivated, and a lot of other settings were also not correct. I changed the ZK back to 0315 as you recommended and coded the HU ecu again.
And then when I pressed read SVT all the ECU´s showed up, even the DKOMBI

Thank you for your help, I am truly greatful for you taking time to assist an amateur like me

Now I just need to get the HUD working. Is it necessary to code the DKOMBI again after I have added VO 610 (HUD)? Isn't the HUD a separate ECU?

[atzebmw]

Originally Posted by chrbmw

I think it is all working again.

Attachment 2459568

I think the problem was that I might have uploaded some incorrect cafd into the HU_Entrynav. I noticed that the MOST connections were deactivated, and a lot of other settings were also not correct. I changed the ZK back to 0315 as you recommended and coded the HU ecu again.
And then when I pressed read SVT all the ECU´s showed up, even the DKOMBI

Thank you for your help, I am truly greatful for you taking time to assist an amateur like me

Now I just need to get the HUD working. Is it necessary to code the DKOMBI again after I have added VO 610 (HUD)? Isn't the HUD a separate ECU?

That's great and I'm happy.
Even if I don't fully understand it, but it doesn't matter.

The HUD is no separate Ecu in F3x series. It is only a display connected with the Kombi.
So if you want to activate it you have to search for problems in the Kombi.
Do you have the right DKombi suitable for HUD?
I think yes because otherwise you would not have been able to connect it.
And i don't know your last coding steps, but definitely the DKombi has to be coded with the VO 610 and the HUEntrynav too.
And as i already said, did you check the checkmark in the iDrive settings to activate the HUD?

[chrbmw]

Originally Posted by atzebmw

That's great and I'm happy.
Even if I don't fully understand it, but it doesn't matter.

The HUD is no separate Ecu in F3x series. It is only a display connected with the Kombi.
So if you want to activate it you have to search for problems in the Kombi.
Do you have the right DKombi suitable for HUD?
I think yes because otherwise you would not have been able to connect it.
And i don't know your last coding steps, but definitely the DKombi has to be coded with the VO 610 and the HUEntrynav too.
And as i already said, did you check the checkmark in the iDrive settings to activate the HUD?

I think my explanations were maybe not 100% correct either. Just to formulate the right questions you need to know a little bit about what you are doing. :-) And I am very new to this E-sys stuff. I may have played around with too many buttons all at once.

Yes I got the HUD working also. I didn't code the HU_Entrynav after I added VO 610, I think I managed to change all the parameter via FDL coding. I couldn't understand why I didn't have HUD ECU on my list! :-)
All that is left now is to fit it in the dashboard, and change the windscreen and rain sensor.


I got one issue though with the 6WB that I cannot solve. It is the Nav looks to be cut off slightly to the right, and the distance bar looks a bit strange. (distance bar looks ok in daylight graphics), But screen still looks like it is missing a little to the right.
Has anyone found a solution to this problem? I can see it has been mentioned a couple of times in this thread already, but no real solution has come up.

[Andrew48]

Hi guys,
I want to make a speedometer in ECO PRO mode showing max speed up to 260 km/h, not a 120 on 6wb.
Does anyone know if its possible and how to code it?

[fredde85]

Originally Posted by chrbmw

I think my explanations were maybe not 100% correct either. Just to formulate the right questions you need to know a little bit about what you are doing. :-) And I am very new to this E-sys stuff. I may have played around with too many buttons all at once.

Yes I got the HUD working also. I didn't code the HU_Entrynav after I added VO 610, I think I managed to change all the parameter via FDL coding. I couldn't understand why I didn't have HUD ECU on my list! :-)
All that is left now is to fit it in the dashboard, and change the windscreen and rain sensor.


I got one issue though with the 6WB that I cannot solve. It is the Nav looks to be cut off slightly to the right, and the distance bar looks a bit strange. (distance bar looks ok in daylight graphics), But screen still looks like it is missing a little to the right.
Has anyone found a solution to this problem? I can see it has been mentioned a couple of times in this thread already, but no real solution has come up.

Attachment 2459969

I have exact the same problem

[Queiroz]

Hello,
I have the same problem also.
If someone car share some ideas it would be great.
My navigation was working great in my 2013 F31.
It would show the indication near the top, with color in the location like this photo:

[img]https://i.ibb.co/ts74WMD/CF24-FAE3-9...82-B06-C44.jpg[/img]

After coding VO with 563 and 7AC I lost several options in HU like 6wb menu and car service info.
Got everything back except the navi part in cluster.
Now arrows are almost on top of each other, right side is cutting in roundabout and text is no longer in color, like this photo:

[img]https://i.ibb.co/3RwjqJx/A6-CC6-E8-C...-DE28-EFC1.jpg[/img]

6WB is present in Salapa and coded to HU and DKombi.
I may need some more fdl coding in my NBT, would appreciate a lot if someone could give some hints...
Car doesn't have HUD, is has no error in ista

[img]https://i.ibb.co/NWHV0mv/D11-CAC29-6...-B64-D1-FE.jpg[/img]

[img]https://i.ibb.co/9YVgsp6/36-F6994-D-...4-E855-FF4.jpg[/img]

[img]https://i.ibb.co/TYJc8vG/A88276-A3-C...-E8-F57274.jpg[/img]

[atzebmw]

You can play around with these 3 settings.

In DKombi:
Navi_NBT_enable: kein NBT <--> NBT_Anzeige

In NBT:
Kombi_Aufloesung: nicht aktiv <--> aktiv
MFID_KOMBI_VARIANT nicht aktiv <--> aktiv

[Queiroz]

Thanks, try all those values and unfortunately had no luck.

I'm running out of ideas and possibly being forced to make the trip back to my installer...

One thing is for sure, with my old and correct settings for 6wb distance to next instruction is in the top right, by the street name, and the distance bar when approaching an intersection is presented on the right side, not left like I have now... :

[Queiroz]

Hello, finally some good news.
Got my 6wb showing NBT information again the right way.
Arrow with distance on top right corner and distance bar at the right side.
You can see pictures bellow.

Many thanks to dayvg from bimmerfest for sharing answer to the problem. (I don't know if he is part of bimmerpost)
You can read details here:

https://www.bimmerfest.com/threads/6...700327/page-44

What I did is exactly what he posted.
Only after all this FDL coding in NBT and Kombi it will work correctly again.
Hope this helps all that have the same problem.
Huge thanks also for Shawn and Ace320 for countless PM's helping too!

In NBT:

NAVI_HUD_AVAILABLE
aktiv (active) = 01

KOMBI_AUFLOESUNG
aktiv (active) = 01

HUD_KOMPRIMIERUNG_ART
rle_1 = 00

HUD_AUFLOESUNG
aufloesung_1 = 00

In Kombi:

NAVI_NBT_ENABLE
nbt_anzeige = 01

[img]https://i.ibb.co/gW043K8/E7-F7-BE6-F...AD3-BA8-B1.jpg[/img]
[img]https://i.ibb.co/xq36Qdb/CDD8-C7-D2-...71-C9-DE16.jpg[/img]

[atzebmw]

Originally Posted by Queiroz

What I did is exactly what he posted.
Only after all this FDL coding in NBT and Kombi it will work correctly again.

Interesting that these are exactly my settings only additionally with the HUD settings.

[jeffijaffa]

Originally Posted by Max18771

Hi at all, anyone know the mimun istep for 6wb installing? my car as 16 7 506.

Thanks

Max

Originally Posted by Max18771

Hi at all, anyone know the mimun istep for 6wb installing? my car as 16 7 506.

Thanks

Max

Late 2017 and above or early 2017 istep. That's when the 6WB combi came out for the LCI F30 . Your istep is 2016

[Queiroz]

Originally Posted by atzebmw

Interesting that these are exactly my settings only additionally with the HUD settings.

Forget to mention, I don't have HUD

Btw, did you noticed the little white dot over the range, under speedometer?
Any idea what that is?
It's only present when using navigation, it would make sense it's the remaining fuel you'll have in the thank, when arriving at your destination set in Navi.
Funny thing, it doesn't add up.
My trip is about 70K and range 322K, little dot would be more towards the right...

Never mind my geek side on this...

[Queiroz]

Ok, just find out, white dot is the minimum amount of fuel you need in the bar, to get to your destination!

[baxter8282]

Anyone know if you can code an additional digital speedo in the BC area. I feel the needle gets in the way in Comfort mode heading up to 70mph.

[fredde85]

Hi. What setting should i have on
"KOMBI_AUFLOESUNG
aktiv (active) = 00"

in my car aktive = 01
nicht_aktive = 00
??

Originally Posted by Queiroz

Hello, finally some good news.
Got my 6wb showing NBT information again the right way.
Arrow with distance on top right corner and distance bar at the right side.
You can see pictures bellow.

Many thanks to dayvg from bimmerfest for sharing answer to the problem. (I don't know if he is part of bimmerpost)
You can read details here:

https://www.bimmerfest.com/threads/6...700327/page-44

What I did is exactly what he posted.
Only after all this FDL coding in NBT and Kombi it will work correctly again.
Hope this helps all that have the same problem.
Huge thanks also for Shawn and Ace320 for countless PM's helping too!

In NBT:

NAVI_HUD_AVAILABLE
aktiv (active) = 01

KOMBI_AUFLOESUNG
aktiv (active) = 00

HUD_KOMPRIMIERUNG_ART
rle_1 = 00

HUD_AUFLOESUNG
aufloesung_1 = 00

In Kombi:

NAVI_NBT_ENABLE
nbt_anzeige = 01

[img]https://i.ibb.co/gW043K8/E7-F7-BE6-F...AD3-BA8-B1.jpg[/img]
[img]https://i.ibb.co/xq36Qdb/CDD8-C7-D2-...71-C9-DE16.jpg[/img]

[atzebmw]

Originally Posted by fredde85

Hi. What setting should i have on
"KOMBI_AUFLOESUNG
aktiv (active) = 00"

in my car aktive = 01
nicht_aktive = 00
??

For my car with 6WB and NBTEvo

KOMBI_AUFLOESUNG ist also set to aktiv=01

[Queiroz]

Yes, it's an error.
It should be set to aktiv=01

[chrbmw]

Originally Posted by Queiroz

Hello, finally some good news.
Got my 6wb showing NBT information again the right way.
Arrow with distance on top right corner and distance bar at the right side.
You can see pictures bellow.

Many thanks to dayvg from bimmerfest for sharing answer to the problem. (I don't know if he is part of bimmerpost)
You can read details here:

https://www.bimmerfest.com/threads/6...700327/page-44

What I did is exactly what he posted.
Only after all this FDL coding in NBT and Kombi it will work correctly again.
Hope this helps all that have the same problem.
Huge thanks also for Shawn and Ace320 for countless PM's helping too!

In NBT:

NAVI_HUD_AVAILABLE
aktiv (active) = 01

KOMBI_AUFLOESUNG
aktiv (active) = 00

HUD_KOMPRIMIERUNG_ART
rle_1 = 00

HUD_AUFLOESUNG
aufloesung_1 = 00

In Kombi:

NAVI_NBT_ENABLE
nbt_anzeige = 01

[img]https://i.ibb.co/gW043K8/E7-F7-BE6-F...AD3-BA8-B1.jpg[/img]
[img]https://i.ibb.co/xq36Qdb/CDD8-C7-D2-...71-C9-DE16.jpg[/img]

I can confirm that these settings does not work with Entrynav.
I still have graphics cut off to the right.