[cncmastr]

Here is one - Video: N20 Oil catch can install DIY http://f30.bimmerpost.com/forums/sho....php?t=1304001

[cncmastr]

And another: http://f30.bimmerpost.com/forums/sho...8#post20218098
N20 oil change video

[N0Chill 335i]

Bump.
Looking for a seat removal DIY. From the research I've done, no one has done a DIY for it on this forum. I've found the door panels and rear seats but no luck finding the front seats for this model.

[badbread]

Are external links allowed? If so, you can add my F30 335i Spark Plug DIY?

Here

[acopeland]

Do anyone know where the OBD plug for decoding is located 0n a 2017 330i

[KD07]

DIY guide for the downpipe install on the B58? Specifically 340i? Haven't come across one yet, only n55. Planning on doing it without a lift and only hydraulic floor jack and jack stands.

[BBEENNEE]

I updated my DIY PDF for Soft Closing doors, if you want to add it to the DIY list

https://www.dropbox.com/s/27i0bkslev...%20V2.pdf?dl=0

And thanks to david51, he used my DIY-Guide on a 2-Series, and showed that it is also possible without drilling and using the normal connectors.

[ronanz]

Originally Posted by BBEENNEE

I updated my DIY PDF for Soft Closing doors, if you want to add it to the DIY list

https://www.dropbox.com/s/27i0bkslev...%20V2.pdf?dl=0

And thanks to david51, he used my DIY-Guide on a 2-Series, and showed that it is also possible without drilling and using the normal connectors.

This please ^^ 2blu

.

[bmrguy03]

Originally Posted by N0Chill 335i

Bump.
Looking for a seat removal DIY. From the research I've done, no one has done a DIY for it on this forum. I've found the door panels and rear seats but no luck finding the front seats for this model.

You just remove four bolts. Look for any audio upgrade DIY and they will have the instructions in there since it is required for the underseat woofers.

[SalpacinoBMW]

Anyone have a DIY for replacing the headlight lens/glass? Mine have a bunch of small little cracks that look to be heat or putting to much pressure one it. Would like to replace them without having to replace the whole headlight housing. Thanks in advance

[SuperHoman]

Very useful! Thanks!

[koket]

Thanks a lot!

[aemtuning]

thanks a lot

[EDWYER]

Excellent.

[bobiam]

Your connection is not secure

The owner of www.f30post.com has configured their website improperly. To protect your information from being stolen, Firefox has not connected to this website.

[TheShadow]

Whenever i try to access these links such as m exhaust on chrome it wont let me. Same thing connection not secure

[TK335iMSPT]

Originally Posted by TheShadow

Whenever i try to access these links such as m exhaust on chrome it wont let me. Same thing connection not secure

I assume you are on an IPhone. Click the show more thingy and click continue to site or something of that manner. May be called display site too.

[NicholasJW]

Thank you very much!

[the_southern_duck]

Originally Posted by cncmastr

Here is one - Video: N20 Oil catch can install DIY http://f30.bimmerpost.com/forums/sho....php?t=1304001

Quick question. Where did you happen to purchase the catch can and what’s a “reasonable” price? I’ve been looking and it seems the going rate is around 200. Thanks in advance.

[cncmastr]

Originally Posted by the_southern_duck

Quick question. Where did you happen to purchase the catch can and what’s a “reasonable” price? I’ve been looking and it seems the going rate is around 200. Thanks in advance.

I think xtreme power house, that price sounds about right.

[maksimad]

Keep up the good wok.
Looking forward to try some DIY stuff.
Proud owner of BMW!!!

[flounder]

most of the link i click doesnt work. Error message as below:

Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator at webmaster@bimmerpost.com to inform them of the time this error occurred, and the actions you performed just before this error.

More information about this error may be available in the server error log.