11-27-2021, 01:18 PM | #1 |
New Member
2
Rep 22
Posts |
Coding LCI Tail Lights.
Hi guys,
I'm not sure if I have another option here, but was hoping someone could confirm this for me. I recently installed LCI tail lights on my 2014 335. I used Bimmercode to code it like it shows all over the internet, but when I get to output 8 & 9, I'm not able to input the value specified. The only issue that I notice is that the indicators on the inner lights are not working. I've read about HELC but I don't have ISTA. I believe right now my only options are to either tap into the wires for the outer lights, or install windows on my MAC & then get ISTA. Has anyone gotten around this any other way? Thanks! |
11-27-2021, 02:46 PM | #2 |
Banned
577
Rep 2,047
Posts |
The only way it seems to be using a laptop and esys to modify the vehicle order and code the REM. Here is a guide
https://f30.bimmerpost.com/forums/sh....php?t=1174188 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|