[Raytec85]

Does anyone know how to code the window roll down, when open the door ? like the video below:

[tomsab0]

Press 2x on the opening Button and then Open the door...

[Raytec85]

Originally Posted by tomsab0

Press 2x on the opening Button and then Open the door...

But I want that automatic like the video showed. Once open the door the window roll down itself, then close the door roll up itself

[tomsab0]

In the Video you only see that After pulling the handle the window goes down; who tells you,,that he didn' press the button twice before...?

[Raytec85]

Originally Posted by tomsab0

In the Video you only see that After pulling the handle the window goes down; who tells you,,that he didn' press the button twice before...?

Coz my friend took that video, and we wondering how to code this access. Normally we open the door, the window will roll down 1-2 inch but not as much as the video. Also when close the door the window roll up by itself.

[tomsab0]

Then try pressing 2x open on your remote und pull the handle --> window will go down like in the video. The function is also described in the car's manual...

[Raytec85]

Originally Posted by tomsab0

Then try pressing 2x open on your remote und pull the handle --> window will go down like in the video. The function is also described in the car's manual...

What about when you out from the car ? Can we do that ?

[tomsab0]

Of course; when opening the car with your keyfob you only have to press two times instead of one...

[Raytec85]

Originally Posted by tomsab0

Of course; when opening the car with your keyfob you only have to press two times instead of one...

I would try that later, but again what about I do not want to press at the keyfob. I have a comfort access. Can it be more straight forward. I access to car, open the door, the window roll down ( as low as I want ? ), then close the door ( window roll up automatically ) without press anything.

[tomsab0]

Ok, I,do not have ca; but take a look in your manual. There it is described in chapter "opening and closing"

[DR_BMW]

What's the purpose of this?

The window goes down when the door opens and then goes back up when the door is closed.

I don't see the added benefit.

GT windows already go down slightly when opening and closing the doors.

[rapid64k]

Originally Posted by DR_BMW

What's the purpose of this?

The window goes down when the door opens and then goes back up when the door is closed.

I don't see the added benefit.

GT windows already go down slightly when opening and closing the doors.

I have to agree, I mean what if it is raining???

[Raytec85]

Originally Posted by DR_BMW

What's the purpose of this?

The window goes down when the door opens and then goes back up when the door is closed.

I don't see the added benefit.

GT windows already go down slightly when opening and closing the doors.

I want to adjust the "slightly" to more. The point is easier here in and out in singapore.... And I seldom go outdoor , always inside the car park.

[gary3005]

Hi,
I have a GT, and use the function quite often when I'm parked next to another car... As the window 'leans in' quite a bit when closed up, having it open half way and not having a window frame in the way makes it easier to get out without having to fully open the door.. If that makes sense?!?

[DR_BMW]

Makes sense for more "body" or "headroom" when stepping out of the GT in a tight garage/parking spot.

[Raytec85]

Originally Posted by DR_BMW

Makes sense for more "body" or "headroom" when stepping out of the GT in a tight garage/parking spot.

Do you know the code we can adjust the window ??? Thanks