01-09-2018, 10:05 AM | #1 |
Lieutenant Colonel
90
Rep 1,677
Posts |
R1 Concepts Performance Brakes| Carbon Geomet Rotors & R1, EBC, and Hawk Pads!
R1 Concepts| Carbon Alloy Geomet Rotors!
We're happy to introduce to you all our new Carbon Alloy Geomet rotors! Manufactured for European and heavy vehicles, our High Carbon iron formulations (Molybdenum, Chromium, and Carbon) enhances noise dampening characteristics, while providing high strength, and increased thermal conductivity compared to standard discs, which increases durability. Each rotor is engineered to match the OE vane configuration, including OE split-core technology to ensure proper and maximum heat dissipation. Additionally, all cores are dipped with a specifically formulated paint in order to provide a smoother finish inside the vane structure. The smooth finish will improve air flow as well as reduce the amount of machining require in or to properly balance the finished rotor during the mill-balancing process. Fine-Turned Next, the castings are sent to our state of the art machining facilities, where each rotor is machined to the tightest tolerances available in the market today. We can guarantee specifications of .010mm disc thickness variation (DTV) and .050mm maximum lateral runout. Though in practice, we regularly achieve .007mm DTV and .025mm maximum lateral runout. Then, the rotors are fine-turned to a maximum of 1.6 RMS. The objective of these strict tolerances is to create the smoothest possible finish, which improves initial break-in due to the increased contact between the pad and the rotor. After all of the machining processes are completed, each rotor passes a 100% electronic inspection station that measures over 20 attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. GEOMET Finish- The Superior Corrosion Protection Finally, we apply a genuine GEOMET Finish throughout the entire part, which promises to deliver superior corrosion protection. The GEOMET coating is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this same a tremendous amount of time and money during the installation process.
3 SERIES FT/RR CARBON ALLOY GEOMET ROTORS (1-PIECE) (ANY DRILLING PATTERN):PM FOR PRICING 4 SERIES FT/RR CARBON ALLOY GEOMET ROTORS (1-PIECE) (ANY DRILLING PATTERN):PM FOR PRICING ALUMINUM RIVETED HAT ROTORS (FRONT 370MM) FRONT CARBON ALLOY OE REPLACEMENT GEOMET ROTORS:$450 SHIPPED FRONT CARBON ALLOY SLOTTED GEOMET ROTORS:$475 SHIPPED FRONT CARBON ALLOY DRILLED & SLOTTED GEOMET ROTORS:$490 SHIPPED BRAKE PADS R1 OPTIMUM OEP BRAKE PADS R1 PREMIUM CERAMIC BRAKE PADS R1 PERFORMANCE SPORT BRAKE PADS BRAKE FLUID ATE TYPE 200 AMBER BRAKE FLUID: $12 SHIPPED G2 CALIPER PAINT $38 SHIPPED (STANDARD COLORS) Contact Info Email: Kevin@r1concepts.com Phone: 888.712.6623 ext. 7022 www.r1concepts.com Last edited by r1concepts; 04-18-2019 at 12:40 PM.. |
|
03-14-2018, 05:14 PM | #13 |
Colonel
848
Rep 2,771
Posts |
|
Appreciate
1
r1concepts89.50 |
03-31-2018, 01:23 AM | #15 |
Private First Class
104
Rep 184
Posts
Drives: F30 N26
Join Date: Mar 2018
Location: Atlanta
|
I've had mine for about a week.... I like them, definitely an upgrade from the stock ones, when I decide to finally upgrade the calipers I'm sure they'll be that much better.
|
Appreciate
1
r1concepts89.50 |
04-16-2018, 04:42 PM | #19 |
Lieutenant Colonel
90
Rep 1,677
Posts |
|
Appreciate
0
|
04-25-2018, 02:24 AM | #22 | |
Private First Class
53
Rep 123
Posts |
Quote:
Received mine which is at least 1inch bigger than the original. Therefore issues with handbrake.. |
|
Appreciate
0
|
Bookmarks |
Tags |
brake pads, brakes, r1 concepts, r1concepts, rotors |
|
|