BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST
>
N55 Engine won't start
| 11-17-2024, 09:27 PM | #1 |
|
Registered
0
Rep 4
Posts |
N55 Engine won't start
Replaced the oil filter housing gasket and the intake manifold the other day. Upon completion, car would crank but not start. Tested the car for codes and these are the ones it’s shooting.
I checked all the connections in the connections and they all seem to be seated properly. Any suggestions? Last edited by Viken365; 11-17-2024 at 10:09 PM.. |
| 11-19-2024, 05:07 AM | #2 |
|
Private First Class
 
93
Rep 142
Posts |
Anything that was unplugged during the repair should be disconnected cleaned and re connected. It has to be something you overlooked or got dirty during your repair. Buy some electrical contact cleaner and spray the connections as well.
__________________
 |
| 11-21-2024, 04:07 AM | #3 |
|
Colonel
 
315
Rep 2,021
Posts |
yup, sounds electrical, cause you replaced mechanical parts and that should be just remove and replace.
but this sound like an over site or some connectors not installed correctly or not making contact. |
|
Appreciate
0
|
Post Reply |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|
