[KTE]

Hadn’t a clue about a lot of things tied with eSys and the launcher.

The script does work, try to change the time before running the script, and maintain that until you have finished what you are doing.

I may turn to BimmerCode once I can get back to “default” or factory, so I can make a backup on there and continue making tweaks every now and again.


eSys is really useful for full on retrofits of which I am not doing. I’d like to actually get a Pro license but that seems unlikely, so once back to basics and warranty work is adhered to, I’ll go down the bimmercode route.

Don’t even have anything extravagant, 8.8” sceeen that comes in a 4 series, it would just look odd with the smaller controller.

Electric seats don’t normally come with easy entry/exit do they?

Then a few fun things I did like the Xmas/M logos, digital speedo display.

It may all go unnoticed, but I have no relationship with the dealership and it’s my first visit.

[hugo_nz]

I am going to get flamed for this, but here goes anyway. Why all this effort to find workarounds for the software? Is $50 really so big a price to pay for a rather useful piece of software? I don't think so.

More importantly, however, is the fact that you are donating money to a worthy cause. I donated to the BCRF and did so happily, despite the fact that I have donated my time and skills to the Breast Cancer Foundation here in New Zealand already. US$50 converts to NZ$73 which is really not a big deal.

My grandmother died from breast cancer and I never got to know her as a result. Even scarier is the thought of my mother or sister having to go through that same drama. If my $73 makes even the smallest impact then I will be happy.

Stop with the workarounds, donate the money, and if you really feel that strongly about it...flame away.

#JustSaying

[Abzynthe]

Originally Posted by hugo_nz

I am going to get flamed for this, but here goes anyway. Why all this effort to find workarounds for the software? Is $50 really so big a price to pay for a rather useful piece of software? I don't think so.

More importantly, however, is the fact that you are donating money to a worthy cause. I donated to the BCRF and did so happily, despite the fact that I have donated my time and skills to the Breast Cancer Foundation here in New Zealand already. US$50 converts to NZ$73 which is really not a big deal.

My grandmother died from breast cancer and I never got to know her as a result. Even scarier is the thought of my mother or sister having to go through that same drama. If my $73 makes even the smallest impact then I will be happy.

Stop with the workarounds, donate the money, and if you really feel that strongly about it...flame away.

#JustSaying

I think the reason for all these workarounds is that the developer isn't responding anymore, even if you donate.

[kitster]

Originally Posted by hugo_nz

I am going to get flamed for this, but here goes anyway. Why all this effort to find workarounds for the software? Is $50 really so big a price to pay for a rather useful piece of software? I don't think so.

More importantly, however, is the fact that you are donating money to a worthy cause. I donated to the BCRF and did so happily, despite the fact that I have donated my time and skills to the Breast Cancer Foundation here in New Zealand already. US$50 converts to NZ$73 which is really not a big deal.

My grandmother died from breast cancer and I never got to know her as a result. Even scarier is the thought of my mother or sister having to go through that same drama. If my $73 makes even the smallest impact then I will be happy.

Stop with the workarounds, donate the money, and if you really feel that strongly about it...flame away.

#JustSaying

Paying/donations for software, I don't have an issue with but at the moment TM seems to be taking the money and not providing the Pro login details.

I've paid directly to TM and heard nothing back and yes I do feel a bit cheated. If TM is no longer supporting his software then he should stop his automated emails asking for donations and just say so on the forums.

I've asked PayPal to look into the transaction, honestly I have no idea if TM has really passed on the donation or just using my cash for a new car.

[5mall5nail5]

So.. what are our options these days?

[teaston]

Originally Posted by 5mall5nail5

So.. what are our options these days?

Some say you can find a working token for free, some say eBay, some say Esysx

Personally I just use Bimmercode, much easier and more convenient!

[5mall5nail5]

Originally Posted by teaston

Some say you can find a working token for free, some say eBay, some say Esysx

Personally I just use Bimmercode, much easier and more convenient!

I need to code for M Performance brakes (370mm) - I have Bimmercode, but you can't do that.

[sspade]

Originally Posted by 5mall5nail5

I need to code for M Performance brakes (370mm) - I have Bimmercode, but you can't do that.

Positive this cant be coded via expert mode?

[5mall5nail5]

Originally Posted by sspade

Positive this cant be coded via expert mode?

Yes, it's a VO code, not FDL

[sspade]

Originally Posted by 5mall5nail5

Yes, it's a VO code, not FDL

Im pretty sure you can code VO in Expert mode.

I had to code my SAT (2TB) sports auto transmission... in expert mode because it was also a VO code.

Someone else please chime if they have knowledge...

Just trying to help and I have a feeling BimmerCode is capable.

Im also upgrading my brakes (to MSport) this spring and will likely need to know the answer to this very question!

[teaston]

Originally Posted by 5mall5nail5

Yes, it's a VO code, not FDL

Originally Posted by sspade

Im pretty sure you can code VO in Expert mode.

I had to code my SAT (2TB) sports auto transmission... in expert mode because it was also a VO code.

Someone else please chime if they have knowledge...

Just trying to help and I have a feeling BimmerCode is capable.

Im also upgrading my brakes (to MSport) this spring and will likely need to know the answer to this very question!

VO coding just makes a whole load of FDL changes “en mass”, so you can code it with Bimmercode expert mode, but you would need to know all of the FDL changes that need to be made.

[feranox]

Tokenmaster wrote Launcher Pro 2.8.2 on his blog and made this version free

http://tokenmaster.blogspot.com/2019/

[teaston]

Originally Posted by feranox

Tokenmaster wrote Launcher Pro 2.8.2 on his blog and made this version free

http://tokenmaster.blogspot.com/2019/

Wow, Tokenmaster is still alive! And really pissed off!

[bishbosh]

Originally Posted by teaston

Wow, Tokenmaster is still alive! And really pissed off!

Isn't he just?

Can sort of understand it when others have ripped off and repackaged his stuff to sell.

While this version's free I noticed that the token expires next year, so probably not a good long term solution.

[ian332isport]

This is a better option. Post #11

https://f30.bimmerpost.com/forums/sh....php?t=1605618

All works fine on my diagnostic laptop, and despite what's being said about it containing malware, I can't find any.

[bishbosh]

Originally Posted by ian332isport

This is a better option. Post #11

https://f30.bimmerpost.com/forums/sh....php?t=1605618

All works fine on my diagnostic laptop, and despite what's being said about it containing malware, I can't find any.

I found that one earlier, generates 50 year tokens so no need to shell out anything.

[malbec]

Originally Posted by teaston

VO coding just makes a whole load of FDL changes “en mass”, so you can code it with Bimmercode expert mode, but you would need to know all of the FDL changes that need to be made.

yep in the us is $30 for the pro version of bimmercode and doesn't seems a lot and really simplify a lot the process of installing a lot of sofware

question for you or anyone who knows the answer, I am also interested in having apple carplay in full screen but for that the only option that I found was to pay $50 and they will send me the code

can I do this by code using bimmbercode or just ESYS??

[blacklashit]

i try all the methods but i still can't connect to the car, i get the no zgw thing, i have icom module i can connect to the car via ista+ but e-sys nothing, if we have a good man here around that can help me to install e-sys properly and get connected to the car (i will pay) i will be thankful

[teaston]

Originally Posted by blacklashit

i try all the methods but i still can't connect to the car, i get the no zgw thing, i have icom module i can connect to the car via ista+ but e-sys nothing, if we have a good man here around that can help me to install e-sys properly and get connected to the car (i will pay) i will be thankful

Maybe shawnsheridan can give some advice.

[shawnsheridan]

Originally Posted by blacklashit

i try all the methods but i still can't connect to the car, i get the no zgw thing, i have icom module i can connect to the car via ista+ but e-sys nothing, if we have a good man here around that can help me to install e-sys properly and get connected to the car (i will pay) i will be thankful

Most likely Windows Firewall / Defender needs to be disabled.

You will not be able to connect via VIN unless PSdZData is properly installed, and the Car and Laptop have a connection. For this:

1) The Target Connection Window should not be blank (It should show multiple target connections for different chassis')
2) ENET Cable must be good and making good contact in OBDII Port
3) Car must have proper voltage (Make sure motor is running if car is not on a Charger).
4) Laptop must not have Firewall or any Antivirus software running.
5) PC Lan Adapter should get a fallback IP address of 169.254.xxx.xxx (Make sure it is using DHCP and does not have a Static IP address assigned to it)

[blacklashit]

Originally Posted by shawnsheridan

Most likely Windows Firewall / Defender needs to be disabled.

You will not be able to connect via VIN unless PSdZData is properly installed, and the Car and Laptop have a connection. For this:

1) The Target Connection Window should not be blank (It should show multiple target connections for different chassis')
2) ENET Cable must be good and making good contact in OBDII Port
3) Car must have proper voltage (Make sure motor is running if car is not on a Charger).
4) Laptop must not have Firewall or any Antivirus software running.
5) PC Lan Adapter should get a fallback IP address of 169.254.xxx.xxx (Make sure it is using DHCP and does not have a Static IP address assigned to it)

i have all in perfect order i dont know why i can't connect, i just got a new laptop and im doing all the updates to the system, after i will try to find someone that will want to install the e-sys for me me even if i have to pay for that, i may not doing something right, i realy want that software and i want it to work properly.

Thanks for all the advice

[shawnsheridan]

Originally Posted by blacklashit

i have all in perfect order i dont know why i can't connect, i just got a new laptop and im doing all the updates to the system, after i will try to find someone that will want to install the e-sys for me me even if i have to pay for that, i may not doing something right, i realy want that software and i want it to work properly.

Thanks for all the advice

Maybe your ENET Cable is bad.