*** OFFICIAL bootmod3 de-cat with OBD readiness THREAD***

TerryGTX · 08-13-2018, 09:06 PM

Quote:

Originally Posted by Jpup

Quote:

Originally Posted by TerryGTX

So excited to let you guys know that my f32 n55 EWG passed emission test today with stock tune and catless downpipe and without any other mods (simulator or spacer) today.... if you are near Boston or in Massachusetts, you know it's hard to pass without cat. But my guy at a trusted shop just had the inspection stickered !!!!

So much effort spent on reading the posts in the forum ... purchased VRSF dp fix...looked through the tutorials.... nothing worked on EWG... until my guy told me the car needs to be driven in a specific manner so the monitors come on while still before the o2 sends a CEL... I don't know how he did it but he just drove it for some miles and had it passed! .. and he has done three cars successfully...all 2014+ N 55 EWG.

As I was prepping to do the same in AZ (get all readiness monitors set but O2), I was instructed to follow the following procedure:

https://www.instructables.com/id/How...or-Smog-Check/

The guy on the N55 FB page said he has done this a couple of times now and if you follow it exactly, it will get all your readiness monitors minus O2 ready for emissions. He said the trick is to try and follow this procedure while using an OBDII reader to watch your readiness monitors in real time. As soon as you had all but one monitor ready, drive straight to the testing station and get it tested. A good tip would be to try and do the driving procedure as close to the testing facility as possible.

Quote:

Originally Posted by JaredG_F30

That's awesome news. Any way that you can source the driving procedure and post it here?

Quote:

Originally Posted by TerryGTX

So excited to let you guys know that my f32 n55 EWG passed emission test today with stock tune and catless downpipe and without any other mods (simulator or spacer) today.... if you are near Boston or in Massachusetts, you know it's hard to pass without cat. But my guy at a trusted shop just had the inspection stickered !!!!

So much effort spent on reading the posts in the forum ... purchased VRSF dp fix...looked through the tutorials.... nothing worked on EWG... until my guy told me the car needs to be driven in a specific manner so the monitors come on while still before the o2 sends a CEL... I don't know how he did it but he just drove it for some miles and had it passed! .. and he has done three cars successfully...all 2014+ N 55 EWG.

Quote:

Originally Posted by maxio

Quote:

Originally Posted by TerryGTX

So excited to let you guys know that my f32 n55 EWG passed emission test today with stock tune and catless downpipe and without any other mods (simulator or spacer) today.... if you are near Boston or in Massachusetts, you know it's hard to pass without cat. But my guy at a trusted shop just had the inspection stickered !!!!

So much effort spent on reading the posts in the forum ... purchased VRSF dp fix...looked through the tutorials.... nothing worked on EWG... until my guy told me the car needs to be driven in a specific manner so the monitors come on while still before the o2 sends a CEL... I don't know how he did it but he just drove it for some miles and had it passed! .. and he has done three cars successfully...all 2014+ N 55 EWG.

The above is definitely possible - I recall drive cycling around 8 times and 1 of those times all monitors turned ready, but the CEL triggered shortly (within 5 miles of additional driving).

The other 7 times the CEL came on as soon as the monitors were "Ready".

Quote:

Originally Posted by Jpup

Quote:

Originally Posted by TerryGTX

So excited to let you guys know that my f32 n55 EWG passed emission test today with stock tune and catless downpipe and without any other mods (simulator or spacer) today.... if you are near Boston or in Massachusetts, you know it's hard to pass without cat. But my guy at a trusted shop just had the inspection stickered !!!!

So much effort spent on reading the posts in the forum ... purchased VRSF dp fix...looked through the tutorials.... nothing worked on EWG... until my guy told me the car needs to be driven in a specific manner so the monitors come on while still before the o2 sends a CEL... I don't know how he did it but he just drove it for some miles and had it passed! .. and he has done three cars successfully...all 2014+ N 55 EWG.

As I was prepping to do the same in AZ (get all readiness monitors set but O2), I was instructed to follow the following procedure:

https://www.instructables.com/id/How...or-Smog-Check/

The guy on the N55 FB page said he has done this a couple of times now and if you follow it exactly, it will get all your readiness monitors minus O2 ready for emissions. He said the trick is to try and follow this procedure while using an OBDII reader to watch your readiness monitors in real time. As soon as you had all but one monitor ready, drive straight to the testing station and get it tested. A good tip would be to try and do the driving procedure as close to the testing facility as possible.

I will ask him when I pick up my car tomorrow. But it should be very similar to the linked. Yes. You will need to be watching the OBD2 monitors while performing the driving cycle.

XxThe_RemedyXx · 08-14-2018, 12:50 PM

Hi everyone -

With permission from Dzenan I wanted to share some information. Halim has supplied me with a MAP to test and report back in regards to "erratic throttle" behavior. I will be flashing the test map tonight and will report back with findings.

TerryGTX · 08-14-2018, 01:12 PM

Yes. And there's one monitor not ready which is the catalyst.

JaredG_F30 · 08-14-2018, 05:46 PM

Terry,

Were you running the stock tune when you passed?

Quote:

Originally Posted by TerryGTX

Yes. And there's one monitor not ready which is the catalyst.

TerryGTX · 08-14-2018, 05:48 PM

Quote:

Originally Posted by JaredG_F30

Terry,

Were you running the stock tune when you passed?

Quote:

Originally Posted by TerryGTX

Yes. And there's one monitor not ready which is the catalyst.

Yes. On the stock tune to pass the test. But I'm daily BM3 STG2 OTS

XxThe_RemedyXx · 08-14-2018, 07:47 PM

Quote:

Originally Posted by TerryGTX

Quote:

Originally Posted by JaredG_F30

Terry,

Were you running the stock tune when you passed?

Quote:

Originally Posted by TerryGTX

Yes. And there's one monitor not ready which is the catalyst.

Yes. On the stock tune to pass the test. But I'm daily BM3 STG2 OTS

Did you lock the DME?

wdeerfield · 08-14-2018, 08:08 PM

Quote:

Originally Posted by XxThe_RemedyXx

Quote:

Originally Posted by JaredG_F30

Can you get your inspection early? Best bet is to swap out the DP after inspection.

Good question... I'm in NY. I have to look into that and see if I can. If so, I'll have a year to figure out the next one

Get inspected early. I got inspected 6 months early a year or so ago to beat the tint law effective date. Now I just have a guy who likes craft beer

XxThe_RemedyXx · 08-14-2018, 08:24 PM

Quote:

Originally Posted by wdeerfield

Quote:

Originally Posted by XxThe_RemedyXx

Quote:

Originally Posted by JaredG_F30

Can you get your inspection early? Best bet is to swap out the DP after inspection.

Good question... I'm in NY. I have to look into that and see if I can. If so, I'll have a year to figure out the next one

Get inspected early. I got inspected 6 months early a year or so ago to beat the tint law effective date. Now I just have a guy who likes craft beer

Got it done today on a whim! Getting DP installed tomorrow AM.

TerryGTX · 08-20-2018, 03:39 AM

Quote:

Originally Posted by XxThe_RemedyXx

Quote:

Originally Posted by TerryGTX

Quote:

Originally Posted by JaredG_F30

Terry,

Were you running the stock tune when you passed?

Quote:

Originally Posted by TerryGTX

Yes. And there's one monitor not ready which is the catalyst.

Yes. On the stock tune to pass the test. But I'm daily BM3 STG2 OTS

Did you lock the DME?

DME doesn't affect inspection I guess

GoodtoGo · 03-22-2019, 10:48 AM

JaredG_F30 , What was the result of your followup readiness test with your stock edited map? Were you able to trigger full readiness?

brikabrak · 03-27-2019, 04:12 AM

Quote:

Originally Posted by GoodtoGo

JaredG_F30 , What was the result of your followup readiness test with your stock edited map? Were you able to trigger full readiness?

would like to know this as well...

Hudsonvalley435 · 04-01-2019, 07:19 AM

Catless dp and I had the CEL. Bought an L spacer and then bought the "mini cat" from big daddies garage and now it's all good.
The pipeline goes like this
D.P. - L spacer - "mini cat" - o2 sensor.
The car has FBO and bm3 stage 2
2015 435i xdrive

FallenRainDrops · 04-01-2019, 01:51 PM

Quote:

Originally Posted by MOTOFILMS435i

Catless dp and I had the CEL. Bought an L spacer and then bought the "mini cat" from big daddies garage and now it's all good.
The pipeline goes like this
D.P. - L spacer - "mini cat" - o2 sensor.
The car has FBO and bm3 stage 2
2015 435i xdrive

does this setup pass emissions (with catless DP)?
Can you show what parts you bought?

shadowx360 · 04-04-2019, 03:37 PM

Quote:

Originally Posted by FallenRainDrops

does this setup pass emissions (with catless DP)?
Can you show what parts you bought?

He's talking about:
http://www.bigdaddiesgarage.com/mini-cat-cel-fix.html
http://www.bigdaddiesgarage.com/angled-cel-fix.html

Basically an offset to reduce the amount of gasses passing over the tip and then a mini cat in front of your O2 sensor to actually reduce all the stuff it's supposed to sense. It still doesn't pass the tailpipe sniff test though so those in California/Ohio/etc are out of luck. You'd probably still need a nice shop that is ok with signing off despite the raging smell of a catless DP not to mention the fact that they can clearly see the offset and mini cat attached to the O2 sensor, and "VRSF" logo on the downpipe itself.

RsPhi135 · 04-05-2019, 03:29 PM

Quote:

Originally Posted by MOTOFILMS435i

Catless dp and I had the CEL. Bought an L spacer and then bought the "mini cat" from big daddies garage and now it's all good.
The pipeline goes like this
D.P. - L spacer - "mini cat" - o2 sensor.
The car has FBO and bm3 stage 2
2015 435i xdrive

How long did you run this setup for? wondering if it is safe and if it would throw off sensor readings?

viperguy212 · 04-05-2019, 04:50 PM

Quote:

Originally Posted by shadowx360

He's talking about:
http://www.bigdaddiesgarage.com/mini-cat-cel-fix.html
http://www.bigdaddiesgarage.com/angled-cel-fix.html

Basically an offset to reduce the amount of gasses passing over the tip and then a mini cat in front of your O2 sensor to actually reduce all the stuff it's supposed to sense. It still doesn't pass the tailpipe sniff test though so those in California/Ohio/etc are out of luck. You'd probably still need a nice shop that is ok with signing off despite the raging smell of a catless DP not to mention the fact that they can clearly see the offset and mini cat attached to the O2 sensor, and "VRSF" logo on the downpipe itself.

Hmm I’m in NJ and my inspection is coming up soon. This looks damn tempting. No sniff test here but the car does smell. It might be worth a try.

RsPhi135 · 04-12-2019, 04:30 PM

Quote:

Originally Posted by viperguy212

Hmm I’m in NJ and my inspection is coming up soon. This looks damn tempting. No sniff test here but the car does smell. It might be worth a try.

give us a update if it works!

4dirty5 · 07-17-2019, 10:40 AM

Old thread, apologies for bringing back to light.

Wondering if anyone else has had any luck?

I'm currently on stock tune with VRSF downpipe and have 2/4 monitors ready. Really hoping I get a second one on as VA only requires 1 to be "not ready." Going to continue the drive cycle and driving around near the emissions test center and will update if another monitor changes to "ready" status.

Good luck to all lol

N55E90toF30 · 10-29-2019, 05:24 PM

Def subscribing, anyone test the spacer and big daddy mini cat? I’m up for inspection next month.

shadowx360 · 10-29-2019, 05:31 PM

Quote:

Originally Posted by N55E90toF30

Def subscribing, anyone test the spacer and big daddy mini cat? I’m up for inspection next month.

I ran the mini cat for a year or so. The CEL light came back every 5k miles so I'd reset it a couple times a year.

N55E90toF30 · 11-19-2019, 02:18 PM

Installing the mini cat today and the L spacer... will flash back to stock this evening. I’ll keep you updated.

Update: installed only mini cat. Flashed back to stock MAP, did not lock DME.

PAFD355 · 11-19-2019, 03:29 PM

And I will be running a spacer with the offset "L" spacer without a mini-cat. Ill post my results in a few days. (currently running catless DP)

08-14-2018, 12:50 PM	#46
XxThe_RemedyXx Colonel 1014 Rep 2,706 Posts Drives: 2016 340i xDrive Join Date: Aug 2009 Location: Westchester, NY iTrader: (0)	Hi everyone - With permission from Dzenan I wanted to share some information. Halim has supplied me with a MAP to test and report back in regards to "erratic throttle" behavior. I will be flashing the test map tonight and will report back with findings.
	Appreciate 0 Quote

08-14-2018, 01:12 PM	#47
TerryGTX Private First Class 46 Rep 160 Posts Drives: 2014 Bmw 435xi M-sport Join Date: Sep 2017 Location: Boston, MA USA iTrader: (0)	Yes. And there's one monitor not ready which is the catalyst. Attached Images
	Appreciate 1 Logicoeur997.50 Quote

03-22-2019, 10:48 AM	#54
GoodtoGo Second Lieutenant 70 Rep 267 Posts Drives: M3 Join Date: Apr 2011 Location: Chicago iTrader: (6)	JaredG_F30 , What was the result of your followup readiness test with your stock edited map? Were you able to trigger full readiness?
	Appreciate 0 Quote

04-01-2019, 07:19 AM	#56
Hudsonvalley435 2015 435i xdrive- 6spd, cp, dp, fmic, bm3 stage 2 28 Rep 41 Posts Drives: F32 435i X Join Date: Aug 2018 Location: Westchester NY iTrader: (0)	Catless dp and I had the CEL. Bought an L spacer and then bought the "mini cat" from big daddies garage and now it's all good. The pipeline goes like this D.P. - L spacer - "mini cat" - o2 sensor. The car has FBO and bm3 stage 2 2015 435i xdrive
	Appreciate 0 Quote

07-17-2019, 10:40 AM	#62
4dirty5 Private 12 Rep 54 Posts Drives: BMW 435i Join Date: May 2019 Location: Northern VA iTrader: (0)	Old thread, apologies for bringing back to light. Wondering if anyone else has had any luck? I'm currently on stock tune with VRSF downpipe and have 2/4 monitors ready. Really hoping I get a second one on as VA only requires 1 to be "not ready." Going to continue the drive cycle and driving around near the emissions test center and will update if another monitor changes to "ready" status. Good luck to all lol
	Appreciate 0 Quote

10-29-2019, 05:24 PM	#63
N55E90toF30 Private First Class 35 Rep 130 Posts Drives: 2014 335xi 6speed FBO BM3 stg2 Join Date: Apr 2018 Location: Philadelphia, PA iTrader: (0)	Def subscribing, anyone test the spacer and big daddy mini cat? I’m up for inspection next month.
	Appreciate 0 Quote

11-19-2019, 02:18 PM	#65
N55E90toF30 Private First Class 35 Rep 130 Posts Drives: 2014 335xi 6speed FBO BM3 stg2 Join Date: Apr 2018 Location: Philadelphia, PA iTrader: (0)	Installing the mini cat today and the L spacer... will flash back to stock this evening. I’ll keep you updated. Update: installed only mini cat. Flashed back to stock MAP, did not lock DME. Last edited by N55E90toF30; 11-20-2019 at 10:31 AM.. Reason: Updating
	Appreciate 0 Quote

11-19-2019, 03:29 PM	#66
PAFD355 New Member 14 Rep 18 Posts Drives: 2015 335i Join Date: May 2018 Location: PA iTrader: (0)	And I will be running a spacer with the offset "L" spacer without a mini-cat. Ill post my results in a few days. (currently running catless DP)
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search