3D Printed Air Scoop (335i N55)

Iyrix · 06-26-2022, 06:28 AM

I've been wanting to add the AFE air scoop to the car for ages and never really wanted to spend the money on something that probably doesn't do a great deal... However, i enjoying 3D printing and with the help of jcdub who very kindly sent me the file for the print i've now printed and installed the scoop. Quality is excellent and fitment is good too.

I'm more than happy to share the file. It's roughly a 16 hour print once you've set the right parameters.

Cheers
G.

winther1 · 06-26-2022, 08:39 AM

Quote:

Originally Posted by Iyrix

I've been wanting to add the AFE air scoop to the car for ages and never really wanted to spend the money on something that probably doesn't do a great deal... However, i enjoying 3D printing and with the help of jcdub who very kindly sent me the file for the print i've now printed and installed the scoop. Quality is excellent and fitment is good too.

I'm more than happy to share the file. It's roughly a 16 hour print once you've set the right parameters.

Cheers
G.

Looks great, we'll done!!! PLA?
I had big plans when I bought my Ender S1 but gave up after 3 months and sold it. Couldn't handle the stress of failed prints! I will buy one from you if you are up for printing another

Iyrix · 06-26-2022, 09:07 AM

Quote:

Originally Posted by winther1

Quote:

Originally Posted by Iyrix

I've been wanting to add the AFE air scoop to the car for ages and never really wanted to spend the money on something that probably doesn't do a great deal... However, i enjoying 3D printing and with the help of jcdub who very kindly sent me the file for the print i've now printed and installed the scoop. Quality is excellent and fitment is good too.

I'm more than happy to share the file. It's roughly a 16 hour print once you've set the right parameters.

Cheers
G.

Looks great, we'll done!!! PLA?
I had big plans when I bought my Ender S1 but gave up after 3 months and sold it. Couldn't handle the stress of failed prints! I will buy one from you if you are up for printing another

I feel the pain at times, but the end results out weight it. First attempt…

Abzynthe · 06-26-2022, 09:15 AM

Quote:

Originally Posted by winther1

Quote:

Originally Posted by Iyrix

I've been wanting to add the AFE air scoop to the car for ages and never really wanted to spend the money on something that probably doesn't do a great deal... However, i enjoying 3D printing and with the help of jcdub who very kindly sent me the file for the print i've now printed and installed the scoop. Quality is excellent and fitment is good too.

I'm more than happy to share the file. It's roughly a 16 hour print once you've set the right parameters.

Cheers
G.

Looks great, we'll done!!! PLA?
I had big plans when I bought my Ender S1 but gave up after 3 months and sold it. Couldn't handle the stress of failed prints! I will buy one from you if you are up for printing another

You would need it mirrored for the 440 as it's on the other side.

Cmatt · 07-31-2022, 06:36 PM

Quote:

Originally Posted by Iyrix

I've been wanting to add the AFE air scoop to the car for ages and never really wanted to spend the money on something that probably doesn't do a great deal... However, i enjoying 3D printing and with the help of jcdub who very kindly sent me the file for the print i've now printed and installed the scoop. Quality is excellent and fitment is good too.

I'm more than happy to share the file. It's roughly a 16 hour print once you've set the right parameters.

Cheers
G.

Not sure how to message on here but could you please send me the file for this? I am wanting to print this thank you!!

baustin · 10-06-2022, 03:37 AM

Quote:

Originally Posted by Iyrix

I've been wanting to add the AFE air scoop to the car for ages and never really wanted to spend the money on something that probably doesn't do a great deal... However, i enjoying 3D printing and with the help of jcdub who very kindly sent me the file for the print i've now printed and installed the scoop. Quality is excellent and fitment is good too.

I'm more than happy to share the file. It's roughly a 16 hour print once you've set the right parameters.

Cheers
G.

Yooo!!! Ive been looking for a 3d print file for this. Would you be able to send me the file for this please?

psp888 · 10-06-2022, 04:10 AM

Looks great. What material did you use to print?
Can you send me the file too please.

Thanks

Iyrix · 10-08-2022, 09:36 AM

Used PLA, still going nice and strong. I've sent across to all people that requested it.

Iyrix · 10-08-2022, 09:38 AM

Scoop attached, didn't realize i could add it to the forum. Enjoy all.

Change file to a .7z

Show us what you make.

Cmatt · 10-09-2022, 11:11 PM

Thank you Iyrix for the file! I modified it last night and just extended the scoop section to go as close as it can to the grill to act more as a "duct" it printed somewhat perfectly in PLA first go in 18hrs on a .6mm nozzle. I highly recommend you print with tree supports rather than grid.

Nicolas330e · 11-09-2022, 09:59 AM

Hi, is better if i use PETG for printing?
I thing this air scoop is compatible with F30 with B48 engine, right?

Simon89 · 11-10-2022, 05:24 AM

Is this also good for a 330d?

skipraider · 12-06-2022, 03:18 PM

After getting the file from lyrix - (thanks again) I printed it and very, very poorly skinned it in carbon fibre. It might not look great, but at least it should be stronger!

Looking at the other photos on here mine looks like it is the wrong way round.

Bachu1 · 12-07-2022, 04:47 AM

ohhhh i like this, does this also fit the 330d?

fearltheunknown · 05-12-2023, 08:09 PM

Quote:

Originally Posted by Bachu1

ohhhh i like this, does this also fit the 330d?

I Dont know if you've already tried this or not. But being a diesel or not it wouldn't matter. As all intake vents are the same, just depends on the side it is

Bachu1 · 05-31-2023, 08:47 AM

oh right... ide just want it for looks

M135_WPN · 06-07-2023, 06:05 AM

Quote:

Originally Posted by Iyrix

Scoop attached, didn't realize i could add it to the forum. Enjoy all.

Change file to a .7z

Show us what you make.

Just jumped on the thread - have you got the cad file of this print handy at all?

Iyrix · 06-07-2023, 01:34 PM

no sorry, just the one attached.

Kads_M5 · 06-24-2023, 06:42 AM

Anyone got the file for this to send me please?

Thanks

jcdub · 06-24-2023, 02:25 PM

Quote:

Originally Posted by Kads_M5

Anyone got the file for this to send me please?

Thanks

Here's the file for the scoop for the left side, when looking at the front of the car.

I can't upload the file here. Here's a link to the file. Again it's for the left side (When looking at the car from the front.

https://drive.google.com/file/d/1NqR...ew?usp=sharing

Kads_M5 · 06-24-2023, 02:28 PM

Sorry where is it? Thanks

jcdub · 06-24-2023, 02:30 PM

Quote:

Originally Posted by Kads_M5

Sorry where is it? Thanks

Link above.

Maybe this file could be a sticky?

06-26-2022, 06:28 AM	#1
Iyrix Lieutenant 103 Rep 472 Posts Drives: F30 330d & 335i Join Date: Feb 2013 Location: UK iTrader: (0)	3D Printed Air Scoop (335i N55) I've been wanting to add the AFE air scoop to the car for ages and never really wanted to spend the money on something that probably doesn't do a great deal... However, i enjoying 3D printing and with the help of jcdub who very kindly sent me the file for the print i've now printed and installed the scoop. Quality is excellent and fitment is good too. I'm more than happy to share the file. It's roughly a 16 hour print once you've set the right parameters. Cheers G. Attached Images __________________ ---------------------------------------------- F25 X3 35d - F30 335i - Last edited by Iyrix; 06-26-2022 at 07:21 AM..
	Appreciate 3 winther11925.00 Ennoch2524.50 F30_320D_UK219.50 Tweet Quote

10-06-2022, 04:10 AM	#7
psp888 Private First Class 37 Rep 115 Posts Drives: F30 Join Date: Oct 2016 Location: UK iTrader: (0)	Looks great. What material did you use to print? Can you send me the file too please. Thanks __________________ 2016 320d M Sport LCI
	Appreciate 0 Quote

10-08-2022, 09:36 AM	#8
Iyrix Lieutenant 103 Rep 472 Posts Drives: F30 330d & 335i Join Date: Feb 2013 Location: UK iTrader: (0)	Used PLA, still going nice and strong. I've sent across to all people that requested it. __________________ ---------------------------------------------- F25 X3 35d - F30 335i -
	Appreciate 0 Quote

10-09-2022, 11:11 PM	#10
Cmatt New Member 11 Rep 12 Posts Drives: BMW 340i Join Date: Jul 2022 Location: Austin, TX iTrader: (0)	Modified scoop Thank you Iyrix for the file! I modified it last night and just extended the scoop section to go as close as it can to the grill to act more as a "duct" it printed somewhat perfectly in PLA first go in 18hrs on a .6mm nozzle. I highly recommend you print with tree supports rather than grid. Attached Images
	Appreciate 3 Iyrix102.50 M_Torx478.50 sam4g630.00 Quote

11-09-2022, 09:59 AM	#11
Nicolas330e Registered 0 Rep 1 Posts Drives: bmw f30 330e Join Date: Nov 2022 Location: italy iTrader: (0)	Hi, is better if i use PETG for printing? I thing this air scoop is compatible with F30 with B48 engine, right?
	Appreciate 0 Quote

11-10-2022, 05:24 AM	#12
Simon89 First Lieutenant 127 Rep 354 Posts Drives: GLC43 Join Date: Oct 2018 Location: York iTrader: (0)	Is this also good for a 330d? __________________ Current: 16' X256 AMG GLC43 Previous: 13' F30 330D XDrive
	Appreciate 0 Quote

12-06-2022, 03:18 PM	#13
skipraider Captain 397 Rep 730 Posts Drives: F31 BMW 335i Join Date: Apr 2015 Location: North East iTrader: (0)	After getting the file from lyrix - (thanks again) I printed it and very, very poorly skinned it in carbon fibre. It might not look great, but at least it should be stronger! Looking at the other photos on here mine looks like it is the wrong way round. Attached Images __________________ F31 2015 BMW 335i - Manual
	Appreciate 1 Iyrix102.50 Quote

12-07-2022, 04:47 AM	#14
Bachu1 First Lieutenant 80 Rep 311 Posts Drives: Bmw 330d m sport Join Date: Apr 2019 Location: Warwickshire iTrader: (0)	ohhhh i like this, does this also fit the 330d?
	Appreciate 0 Quote

05-31-2023, 08:47 AM	#16
Bachu1 First Lieutenant 80 Rep 311 Posts Drives: Bmw 330d m sport Join Date: Apr 2019 Location: Warwickshire iTrader: (0)	oh right... ide just want it for looks
	Appreciate 0 Quote

06-07-2023, 01:34 PM	#18
Iyrix Lieutenant 103 Rep 472 Posts Drives: F30 330d & 335i Join Date: Feb 2013 Location: UK iTrader: (0)	no sorry, just the one attached. __________________ ---------------------------------------------- F25 X3 35d - F30 335i -
	Appreciate 0 Quote

06-24-2023, 06:42 AM	#19
Kads_M5 New Member 11 Rep 26 Posts Drives: Bmw m5 f10 Join Date: Jan 2020 Location: London iTrader: (0)	Anyone got the file for this to send me please? Thanks
	Appreciate 0 Quote

06-24-2023, 02:28 PM	#21
Kads_M5 New Member 11 Rep 26 Posts Drives: Bmw m5 f10 Join Date: Jan 2020 Location: London iTrader: (0)	Sorry where is it? Thanks
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search