F30 2013 328i Can’t find the problem code 48070B

xcantstopm3x · 04-19-2021, 12:50 PM

Hello everyone wanted to see if anyone has had the dreaded Chassis stabilization deactivated. Now BMW idrive is promoting me to drive moderate because of this. Scanned vehicle with fowxwell 530 tool keep getting code 48070B DSC control unit: EEPROM, perform adjustment. I’ve already bleed the brake system. When I reset it with the foxwell light will rest but than comes right back on after completing operation. Help!

jsouth · 09-08-2021, 03:04 PM

Did you ever get this diagnosed or corrected? I changed struts/shocks over the weekend. It drove fine with no trouble codes. I took it in to a local shop for alignment today and the alignment sheet prints out perfect but I have the "Steering! - increased steering effort, drive moderately" error.

In checking codes with the Foxwell, it says the 48070B error.

Soylu02M · 02-21-2022, 06:37 AM

Quote:

Originally Posted by jsouth

Did you ever get this diagnosed or corrected? I changed struts/shocks over the weekend. It drove fine with no trouble codes. I took it in to a local shop for alignment today and the alignment sheet prints out perfect but I have the "Steering! - increased steering effort, drive moderately" error.

In checking codes with the Foxwell, it says the 48070B error.

Hey i have the same problem today do you have fix it?

jsouth · 02-21-2022, 09:10 AM

Quote:

Originally Posted by Soylu02M

Hey i have the same problem today do you have fix it?

I took it to my semi-local independent BMW shop. They had a diagnostic tablet that would reset the steering angle. Took them about 30 seconds.

04-19-2021, 12:50 PM	#1
xcantstopm3x Registered 0 Rep 1 Posts Drives: F30 Join Date: Apr 2021 Location: High Desert iTrader: (0)	F30 2013 328i Can’t find the problem code 48070B Hello everyone wanted to see if anyone has had the dreaded Chassis stabilization deactivated. Now BMW idrive is promoting me to drive moderate because of this. Scanned vehicle with fowxwell 530 tool keep getting code 48070B DSC control unit: EEPROM, perform adjustment. I’ve already bleed the brake system. When I reset it with the foxwell light will rest but than comes right back on after completing operation. Help!
	Appreciate 0 Tweet Quote

09-08-2021, 03:04 PM	#2
jsouth Second Lieutenant 112 Rep 212 Posts Drives: 2013 328i Join Date: Jan 2017 Location: Weatherford, OK iTrader: (0)	Did you ever get this diagnosed or corrected? I changed struts/shocks over the weekend. It drove fine with no trouble codes. I took it in to a local shop for alignment today and the alignment sheet prints out perfect but I have the "Steering! - increased steering effort, drive moderately" error. In checking codes with the Foxwell, it says the 48070B error.
	Appreciate 0 Quote