07-13-2019, 10:39 PM | #1 |
New Member
16
Rep 20
Posts |
Agency power intake fitment 340i
I have a 340i xdrive and purchased a Agency Power intake. For my life i cannot fit the silicone hose they provided onto my inlet pipe on my car. They even sent me a second silicone hose and still no luck. I took it to a shop and ultimately still did not get it seated onto the inlet. Im just wondering if anyone has had any issues in regards to this install on a 340i?
|
07-14-2019, 10:24 AM | #3 |
New Member
16
Rep 20
Posts |
jackstrath yeah its like maybe a millimeter or 2 too small in diameter. At times it fits entirely on the inlet but once you try to get it to slip on the hose begins to collapse and pretty much pops right back out.
|
Appreciate
0
|
07-14-2019, 02:15 PM | #4 |
New Member
2
Rep 13
Posts |
I installed mine on my 340i last week and didn't have too much of a problem with the silicone hose. The clamps they provided were a little too small so I ended up reusing the oem clamps.
|
Appreciate
0
|
07-19-2019, 01:01 PM | #7 | |
New Member
16
Rep 20
Posts |
Quote:
|
|
Appreciate
0
|
07-19-2019, 04:00 PM | #8 |
Enlisted Member
72
Rep 32
Posts
Drives: 2021 M3C BSM | 2018 M240ix (so
Join Date: Jun 2019
Location: PDX
|
I just installed my AP SRI on my M240i this week and it was the biggest PITA ever. The coupler was definitely too small.
I ended up covering the inside with Vaseline, shoving a softball directly inside it, let it sit for about 15min and coated again with Vaseline. Got it installed shortly after that |
Appreciate
0
|
07-20-2019, 03:16 AM | #9 |
New Member
2
Rep 13
Posts |
6BangerOnly
It seems I must have gotten lucky then haha. Sorry for the delay, but here are the pictures. Dealership lagged and didn't finish my car until today. https://i.ibb.co/vcCDkN5/IMG-3534.jpg https://i.ibb.co/sH8Zjzd/IMG-3525.jpg https://i.ibb.co/B6kfFkS/IMG-3524.jpg |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|