[jmascensao]

Thanks Shawn

[kalin76]

It´s not working on my NBT_Evo.

Originally Posted by kalin76

Thanx Siki78 , but I have a HU_NBT_Evo, not an HU_NBT or HU_NBT2 so I think, that the FDL coding will not work. Or should I try?

[spclark90]

I am looking for links to download the programming files for my BmW 430, and hear you are the coding guru. I bought a wrecked 2018 430XI and rebuilding currently. Need to code new headlight module to the car as driver side is not working. I am going to try to recode the light module and reset a lot of codes before replacing a lot of expensive hardware components. Any help as to what I need to download for this. Beginner on programming/coding on vehicles but ready to learn. See I need e-sys, pszdata, launcher. Anything else you recommend.

[ValinceZA]

Hi guys,

So long story short. I bought my 2018 BMW G01 with an I drive 7 cluster in. Nothing really worked correctly, so I asked the garage to install the correct cluster which they did.

I only found out later that the installed cluster was the low spec cluster and not the correct Professional 6WB cluster.

I went around and found the correct cluster and now I find out I need to get it virginized. Took it to some dude that removed the eprom but told me the chip is locked and he could not do it. Keep in mind, I am probably the first person in South Africa to even try this.

So here I am, asking for help.

How can I see if the cluster I bought will work? I read you need to upgrade the software before it can work, so I would need someone to do it for me. I am not tech savvy.

Who can assist?

Thx

[shawnsheridan]

Originally Posted by spclark90

I am looking for links to download the programming files for my BmW 430, and hear you are the coding guru. I bought a wrecked 2018 430XI and rebuilding currently. Need to code new headlight module to the car as driver side is not working. I am going to try to recode the light module and reset a lot of codes before replacing a lot of expensive hardware components. Any help as to what I need to download for this. Beginner on programming/coding on vehicles but ready to learn. See I need e-sys, pszdata, launcher. Anything else you recommend.

PM sent.

[hanh8thuan]

Originally Posted by hanselfransel

I can do it for you via teamviewer now at the moment

Hi can u help me with coding cluster

[Siki78]

Originally Posted by hanh8thuan

Hi can u help me with coding cluster

What you need to code?

[danco666]

Hi guys,

how is going?

Wanted to ask if someone of you have time to help me with the coding 6WB and mine BMW F36.

I have an software E-Sys, cable and evertyhing I just stucked with the coding.

If you have time please let me know I will pay you for your instructions.

Thank you,

Best Regards

[shawnsheridan]

Originally Posted by danco666

Hi guys,

how is going?

Wanted to ask if someone of you have time to help me with the coding 6WB and mine BMW F36.

I have an software E-Sys, cable and evertyhing I just stucked with the coding.

If you have time please let me know I will pay you for your instructions.

Thank you,

Best Regards

I replied to your same PM.

[danco666]

I saw it Shawn, thank you very much. I appreciate.

[danco666]

Hi guys,

did someone had the problem with deleting BKOMBI file?

Unfortunately I deleted it and now I can recover it?

Does anyone know solution how I can recover or create new BKOMBI / DKOMBI file?

Thank you very much.

[shawnsheridan]

Originally Posted by danco666

Hi guys,

did someone had the problem with deleting BKOMBI file?

Unfortunately I deleted it and now I can recover it?

Does anyone know solution how I can recover or create new BKOMBI / DKOMBI file?

Thank you very much.

You need to make sure DKOMBI has Fiber Option Connection.